Reduced order model based neural network control of a squirrel cage induction motor drive. - Nabil Derbel; Mohamed Chtourou; Ahmed Masmoudi 001 (Int. J. Syst. Sci., 1998)

On the dynamic and steady state performances of a vector controlled DFM drive. - Henda Azaza; Ahmed Masmoudi 001 (SMC, 2002)

Extending the analog input capabilities of the DS1102 DSP controller board. - Badreddine Louhichi; Ahmed Masmoudi 001; Luc Loron (Comput. Electr. Eng., 2005)

Star of slots-based graphical assessment of the back-EMF of fractional-slot PM synchronous machines. - Imen Abdennadher 002; Ahmed Masmoudi 001 (SSD, 2013)

Bus-Clamping-Based DTC: An Attempt to Reduce Harmonic Distortion and Switching Losses. - Bassem El Badsi; Badii Bouzidi; Ahmed Masmoudi 001 (IEEE Trans. Ind. Electron., 2013)

RFOC and DTC Strategies for Reduced Structure B3-Inverter Fed Induction Motor Drives. - Imen Nouira El Badsi; Bassem El Badsi; Ahmed Masmoudi 001 (SSD, 2018)

Carrier-Based and Space Vector PWM Techniques for Delta Inverter Fed IM Drive Operating in Linear and Overmodulation Ranges. - Imen Nouira El Badsi; Bassem El Badsi; Ahmed Masmoudi 001 (SSD, 2018)

Electromagnetic-thermal coupling applied to the analysis of the heat transfer in a traction motor. - Anis Abdelkefi; Ahmed Masmoudi 001; Nicola Bianchi (EVER, 2018)

B6-VSI emulation-based DTC strategy dedicated to B3-VSI fed induction motor drives. - Imen Nouira El Badsi; Bassem El Badsi; Ahmed Masmoudi 001 (EVER, 2018)

On the enhancement of the starting capabilities of single phase line-start PMSMs. - Khaoula Bensaida; Imen Abdennadher 002; Ahmed Masmoudi 001; Fabrizio Marignetti (EVER, 2018)

A simple assessment of the dynamics of the road vehicles. - Yassine Boukadida; Ahmed Masmoudi 001; Giovanni Mercurio Casolino; Fabrizio Marignetti (EVER, 2018)

Automotive propulsion drive emulation using two cascaded inverters. - Yassine Boukadida; Ahmed Masmoudi 001; Giovanni Mercurio Casolino; Fabrizio Marignetti; Alessandro Andreoli; Mariano Albanesi (EVER, 2018)

MEC-based prediction of the air gap flux density distribution of spoke-type IPM machines. - Nada Elloumi; Ahmed Masmoudi 001; Mauro Bortolozzi; Alberto Tessarolo (EVER, 2018)

FEA-assisted steady-state modelling of a spoke type IPM machine with enhanced flux weakening capability. - Nada Elloumi; Ahmed Masmoudi 001; Mauro Bortolozzi; Alberto Tessarolo (EVER, 2018)

Characterization on the no- and on-load operations of an improved claw pole machine. - Roua Omri; Amina Ibala; Ahmed Masmoudi 001 (EVER, 2018)

3D-FEA based-comparison of different topologies of claw-pole alternators with a dual excitation. - Roua Omri; Amina Ibala; Ahmed Masmoudi 001 (EVER, 2018)

Analytical model-based optimization of the force production capability of IPM T-LSMs: Application to wave energy conversion systems. - Rihab Bel Hadj Slimen; Imen Abdennadher 002; Ahmed Masmoudi 001 (EVER, 2018)

Bus-Clamping-Based Direct Torque Control Strategy Dedicated to B6-Inverter Fed Symmetrical Two-Phase IM Drive. - Ameni Ouarda; Bassem El Badsi; Ahmed Masmoudi 001 (IEEE Trans. Ind. Electron., 2018)

Pole Shape-Based Reduction of the Harmonic Content of the IPM T-LSM Air Gap Flux Density. - Amal Souissi; Imen Abdennadher 002; Roberto Di Stefano; Ahmed Masmoudi 001; Fabrizio Marignetti (IEEE Trans. Ind. Electron., 2018)

Hybrid Excited Claw-Pole Machines: Comparison between Different Topologies. - Roua Omri; Amina Ibala; Ahmed Masmoudi 001 (SSD, 2019)

Comparison of the No-Load Features of IPM and Consequent Pole Tubular-Linear PM Synchronous Machines. - Amal Souissi; Imen Abdennadher 002; Ahmed Masmoudi 001 (EVER, 2019)

Fractional-Slot PMSMs with One Coil Parallel Branches Made Phases: Topological Characterization and Circulating Harmonic Currents Rejection. - Ahmed Masmoudi 001 (IEEE DataPort, 2019)

Feature Investigation of a Segmented PM Quasi- Halbach T-LSM: Cost-Performance Trade-off. - Ahmed Masmoudi 001; Mohamed Wael Zouaghi; Imen Abdennadher 002; Jian-Xin Shen (IEEE DataPort, 2019)

Rotating High Frequency Injection and Ellipse Fitting Technique for Ringed-Pole Motor Sensorless Control. - Ons Ben Abdallah; Ahmed Masmoudi 001; Matteo Berto; Luigi Alberti; Silverio Bolognani (EVER, 2020)

Feature Investigation of a Segmented PM Quasi- Halbach Tubular-Linear Synchronous Machine. - Ahmed Masmoudi 001 (IEEE DataPort, 2020)

An Approach to Predict IPM T-LSMs Air Gap Flux Density: Application to the Mover Geometry Sizing. - Amal Souissi; Imen Abdennadher 002; Ahmed Masmoudi 001 (IEEE DataPort, 2020)

Fallout of the Mover Eccentricity on the PM Eddy Current Loss of Quasi-Halbach T-LSMs. - Mohamed Wael Zouaghi; Imen Abdennadher 002; Ahmed Masmoudi 001 (IEEE DataPort, 2020)

Fault-Tolerant Fractional-Slot PMSMs with One Coil Parallel Branches Made Phases - Part 1: Identification and Topological Characterization. - Sahar Mkaouar; Aicha Maaoui; Michael Schier; Ahmed Masmoudi 001 (IEEE DataPort, 2020)

Fault-Tolerant Fractional-Slot PMSMs with One Coil Parallel Branches Made Phases - Part 2: Circulating Harmonic Current Rejection Potential. - Sahar Mkaouar; Aicha Maaoui; Michael Schier; Ahmed Masmoudi 001 (IEEE DataPort, 2020)

Fault-Tolerant Fractional-Slot PMSMs with One Coil Parallel Branches Made Phases. Part 2: Circulating Harmonic Current Rejection Potential. - Sahar Mkaouar; Aicha Maaoui; Michael Schier; Ahmed Masmoudi 001 (IEEE DataPort, 2020)

Fault-Tolerant Fractional-Slot PMSMs with One Coil Parallel Branches Made Phases. Part 1: Identification and Topological Characterization. - Sahar Mkaouar; Aicha Maaoui; Michael Schier; Ahmed Masmoudi 001 (IEEE DataPort, 2020)

Feature Investigation of a Segmented PM Quasi- Halbach Tubular-Linear Synchronous Machine. - Mohamed Wael Zouaghi; Imen Abdennadher 002; Jianxin Shen; Ahmed Masmoudi 001 (IEEE DataPort, 2020)

Feature Investigation of a Segmented Poles Quasi- Halbach T-LSM: Application to Free Piston Engines. - Mohamed Wael Zouaghi; Imen Abdennadher 002; Jian-Xin Shen; Ahmed Masmoudi 001 (IEEE DataPort, 2020)

Multiphysics Modelling and Real Time Simulation of a Permanent-Magnet Machine for Electric Vehicles. - Mohamed Amine Frikha; Mohamed El Baghdadi; Yassine Benomar; Ahmed Masmoudi 001; Peter Van den Bossche; Omar Hegazy (EVER, 2021)

On the Enhancement of the Thrust Production of LPMSMs: Application to Ropeless Elevators. - Amal Souissi; Imen Abdennadher 002; Ahmed Masmoudi 001 (EVER, 2021)

An Approach to Reduce the Detent Force of Double-Sided Flat Linear PMSMs. - Amal Souissi; Imen Abdennadher 002; Ahmed Masmoudi 001 (EVER, 2021)

Fractional-Slot PMSMs With One Coil Parallel Branches Made Phases - Part I: Investigation Study. - Ahmed Masmoudi 001; Sahar Mkaouar; Aicha Maaoui; Michael Schier (IEEE Access, 2021)

Feature Investigation of a Segmented Pole Quasi- Halbach Tubular-Linear Synchronous Machine. - Ahmed Masmoudi 001; Imen Abdennadher 002; Mohamed Wael Zouaghi; Jian-Xin Shen (IEEE Access, 2022)

Fractional-Slot PMSMs With One Coil Parallel Branches Made Phases - Part 2: Circulating Harmonic Current Rejection Potential. - Ahmed Masmoudi 001; Sahar Mkaouar; Aicha Maaoui; Michael Schier (IEEE Access, 2022)

3D Rotor Position-Dependant MEC Modeling of Different Claw Pole Machine Topologies. - Roua Omri; Amina Ibala; Ahmed Masmoudi 001 (IEEE Access, 2022)

Investigation of the Effects of the Pole Shoe Geometry on the IPM T-LSM Features: Application to Free Piston Engines. - Amal Souissi; Imen Abdennadher 002; Ahmed Masmoudi 001 (IEEE Access, 2022)

Compound Analytical Model Dedicated to the Prediction of the Features of Fractional-Slot PMSMs. - Amal Souissi; Imen Abdennadher 002; Ahmed Masmoudi 001 (IEEE Access, 2023)

Analytical Investigation of the Air Gap Flux Density of Surface-Mounted PMSMs With Irregular Pole Shapes. - Amal Souissi; Imen Abdennadher 002; Ahmed Masmoudi 001 (IEEE Trans. Ind. Electron., 2025)