On the numerical treatment of bulging of continuously cast slabs. - Andreas Binder (Computing, 1992)

Analyse von unterschiedlichen Fahrzyklen für den Einsatz von Elektrofahrzeugen. - Harald Neudorfer; Andreas Binder; Nicolas Wicker (Elektrotech. Informationstechnik, 2006)

Die stochastische Wissenschaft und zwei Teilsysteme eines Web-basierten Informations- und Anwendungssystems zu ihrer Etablierung (The stochastic science and two subsystems of a web-based information and application system for its establishment) - Andreas Binder (2006)

Calculation of Circulating Bearing Currents in Machines of Inverter-Based Drive Systems. - Annette Muetze; Andreas Binder (IEEE Trans. Ind. Electron., 2007)

Practical Rules for Assessment of Inverter-Induced Bearing Currents in Inverter-Fed AC Motors up to 500 kW. - Annette Muetze; Andreas Binder (IEEE Trans. Ind. Electron., 2007)

A Fast and Stable Heston Model Calibration on the GPU. - Michael Aichinger; Andreas Binder; Johannes Fürst; Christian Kletzmayr (Euro-Par Workshops, 2010)

Development and test of high-speed bearingless PM synchronous machines. - Gabriel Munteanu; Andreas Binder; Tobias Schneider (Elektrotech. Informationstechnik, 2011)

MES Support for Lean Production. - Daryl Powell; Andreas Binder; Emrah Arica (APMS (2), 2012)

Comparison of axial flux and radial flux machines for the use in wheel hub drives. - Marcel Lehr; Kersten Reis; Andreas Binder (Elektrotech. Informationstechnik, 2015)

Permanent magnet synchronous machine design for hybrid electric cars with double e-motor and range extender. - Jeongki An; Andreas Binder (Elektrotech. Informationstechnik, 2016)

Design and measurements of a permanent magnet Flux-Switching-Machine for industrial applications. - Marcel Lehr; Andreas Binder (Elektrotech. Informationstechnik, 2017)

Electromagnetic design of a permanent magnet Flux-Switching-Machine as a direct-driven 3 MW wind power generator. - Marcel Lehr; Daniel Dietz; Andreas Binder (ICIT, 2018)

Design of a synchronous reluctance rotor for the stator of an 11 kW induction machine. - Sascha Neusüs; Andreas Binder (Elektrotech. Informationstechnik, 2018)

Downsizing possibilities of a PM synchronous motor for a hybrid vehicle. - Jeongki An; Yves Gemeinder; Andreas Binder (Elektrotech. Informationstechnik, 2019)

Model order reduction for parametric high dimensional models in the analysis of financial risk. - Andreas Binder; Onkar Jadhav; Volker Mehrmann (CoRR, 2020)

Optimale Auslegung von getriebelosen, permanentmagneterregten Windgeneratoren mit Zahnspulenwicklung und massivem Rotorjoch. - Nicolas Erd; Andreas Binder (Elektrotech. Informationstechnik, 2020)

Steady-state Thermal Analysis of the Contact in Bearings Exposed to Electrical Currents. - Omid Safdarzadeh; Martin Weicker; Andreas Binder (IECON, 2021)

Error Analysis of a Model Order Reduction Framework for Financial Risk Analysis. - Andreas Binder; Onkar Jadhav; Volker Mehrmann (CoRR, 2021)

Bearingless PM-synchronous machine with axial active magnetic bearing fed by zero-sequence current. - Daniel Dietz; Andreas Binder (Elektrotech. Informationstechnik, 2021)

Operational constraints of zero-sequence current feeding in bearingless PM synchronous machines. - Daniel Dietz; Andreas Binder (Elektrotech. Informationstechnik, 2021)

Application-Oriented Selection of Privacy Enhancing Technologies. - Immanuel Kunz; Andreas Binder (APF, 2022)

Poster: Patient Community - A Test Bed for Privacy Threat Analysis. - Immanuel Kunz; Angelika Schneider; Christian Banse; Konrad Weiss; Andreas Binder (CCS, 2022)

A texttt{Matlab} Toolbox for the Regularization of Descriptor Systems Arising from Generalized Realization Procedures. - Andreas Binder; Volker Mehrmann; Agnieszka Miedlar; P. Schulze (CoRR, 2022)

Evaluation of a newly proposed indirect efficiency determination method for permanent magnet synchronous machines. - Björn Deusinger; Andreas Binder (Elektrotech. Informationstechnik, 2022)

A review of critical issues in the design of lightweight flywheel rotors with composite materials. - Xing Li; Christian Mittelstedt; Andreas Binder (Elektrotech. Informationstechnik, 2022)

Investigation of permanent magnet synchronous machines with buried magnets and carbon fiber sleeve for automotive application. - Maximilian Clauer; Andreas Binder (Elektrotech. Informationstechnik, 2023)

Optimum 7 MW HTS direct-drive wind turbine synchronous generator designs with different rotor and stator iron topologies. - Robin Köster; Andreas Binder (Elektrotech. Informationstechnik, 2023)

Using Static Code Analysis for GDPR Compliance Checks. - Andreas Binder; Immanuel Kunz (ESORICS Workshops (1), 2024)

Five-phase space vector carrier-based PWM for third harmonic injection. - Marc Ramos Friedmann; Alexander Möller; Andreas Binder (Elektrotech. Informationstechnik, 2024)

Exciter Ampere turns via Potier's method for a HTSC wind generator. - Robin Köster; Andreas Binder (Elektrotech. Informationstechnik, 2025)