Modification of the AFM Sensor by a Precisely Regulated Air Stream to Increase Imaging Speed and Accuracy in the Contact Mode. - Andrius Dzedzickis; Vytautas Bucinskas; Darius Virzonis; Nikolaj Sesok; Arturas Ulcinas; Igor Iljin; Ernestas Sutinys; Sigitas Petkevicius; Justinas Gargasas; Inga Morkvenaite-Vilkonciene (Sensors, 2018)

Increasing Imaging Speed and Accuracy in Contact Mode AFM. - Andrius Dzedzickis; Vytautas Bucinskas; Tadas Lenkutis; Inga Morkvenaite-Vilkonciene; Viktor Kovalevskyi (AUTOMATION, 2019)

Method for Living Cell Mechanical Properties Evaluation from Force-Indentation Curves. - Inga Morkvenaite-Vilkonciene; Raimundas Vilkoncius; Juste Rozene; Antanas Zinovicius; Oleksii Balitskyi; Almira Ramanaviciene; Arunas Ramanavicius; Andrius Dzedzickis; Vytautas Bucinskas (AUTOMATION, 2019)

Recent Advances in Mechanical Micro- and Nanomanipulation. - Mantas Makulavicius; Oleksii Balitskyi; Rimgaudas Urbonas; Andrius Dzedzickis; Vytautas Bucinskas; Algirdas Petronis; Mykyta Kovalenko; Inga Morkvenaite-Vilkonciene (AUTOMATION, 2020)

Improving Positioning Accuracy of an Articulated Robot Using Deep Q-Learning Algorithms. - Algirdas Petronis; Vytautas Bucinskas; Marius Sumanas; Andrius Dzedzickis; Liudas Petrauskas; Nikita Edgar Sitiajev; Inga Morkvenaite-Vilkonciene (AUTOMATION, 2020)

Human Emotion Recognition: Review of Sensors and Methods. - Andrius Dzedzickis; Arturas Kaklauskas; Vytautas Bucinskas (Sensors, 2020)

Extraction of Information from a PSD for the Control of Vehicle Suspension. - Tadas Lenkutis; Aurimas Cerskus; Nikita Edgar Sitiajev; Kestutis Dumbrava; Ieva Staugaite; Nikolaj Sesok; Andrius Dzedzickis; Vytautas Bucinskas (AUTOMATION, 2021)

Evaluation of Motion Characteristics Using Absolute Sensors. - Marius Sumanas; Darius Urbonis; Algirdas Petronis; Simonas Stankaitis; Tomas Januskevicius; Igor Iljin; Andrius Dzedzickis; Vytautas Bucinskas (AUTOMATION, 2021)

Wearable Feet Pressure Sensor for Human Gait and Falling Diagnosis. - Vytautas Bucinskas; Andrius Dzedzickis; Juste Rozene; Jurga Subaciute-Zemaitiene; Igoris Satkauskas; Valentinas Uvarovas; Rokas Bobina; Inga Morkvenaite-Vilkonciene (Sensors, 2021)

Identification of Road Profile Parameters from Vehicle Suspension Dynamics for Control of Damping. - Aurimas Cerskus; Tadas Lenkutis; Nikolaj Sesok; Andrius Dzedzickis; Darius Virzonis; Vytautas Bucinskas (Symmetry, 2021)

Road Surface Profile Synthesis: Assessment of Suitability for Simulation. - Tadas Lenkutis; Aurimas Cerskus; Nikolaj Sesok; Andrius Dzedzickis; Vytautas Bucinskas (Symmetry, 2021)

Theoretical Simulations of Scanning Electrochemical Microscope Positioning System. - Mantas Makulavicius; Andrius Dzedzickis; Vytautas Bucinskas; Jurga Subaciute-Zemaitiene; Inga Morkvenaite-Vilkonciene (AUTOMATION, 2022)

Sitting Posture Monitoring Using Velostat Based Pressure Sensors Matrix. - Marius Sumanas; Vaiva Treciokaite; Aurimas Cerskus; Andrius Dzedzickis; Vytautas Bucinskas; Inga Morkvenaite-Vilkonciene (AUTOMATION, 2022)

An Automotive Ferrofluidic Electromagnetic System for Energy Harvesting and Adaptive Damping. - Tadas Lenkutis; Darius Virzonis; Aurimas Cerskus; Andrius Dzedzickis; Nikolaj Sesok; Vytautas Bucinskas (Sensors, 2022)

Deep Q-Learning in Robotics: Improvement of Accuracy and Repeatability. - Marius Sumanas; Algirdas Petronis; Vytautas Bucinskas; Andrius Dzedzickis; Darius Virzonis; Inga Morkvenaite-Vilkonciene (Sensors, 2022)

Autonomous Mobile Flock Traffic Simulation in Digital Twin Mode. - Mantas Makulavicius; Rokas Bagdonas; Karolina Lapkauskaite; Justinas Gargasas; Andrius Dzedzickis (AUTOMATION, 2023)

Scanning Electrochemical Microscope Based on Visual Recognition and Machine Learning. - Jurga Subaciute-Zemaitiene; Andrius Dzedzickis; Antanas Zinovicius; Vadimas Ivinskij; Juste Rozene; Rokas Bagdonas; Vytautas Bucinskas; Inga Morkvenaite-Vilkonciene (AUTOMATION, 2023)

Experimental Evaluation of Microrobot Positioning Accuracy. - Jurga Subaciute-Zemaitiene; Andrius Dzedzickis; Vytautas Bucinskas; Rokas Bagdonas (Autom. Control. Comput. Sci., 2023)

Industrial Robots in Mechanical Machining: Perspectives and Limitations. - Mantas Makulavicius; Sigitas Petkevicius; Juste Rozene; Andrius Dzedzickis; Vytautas Bucinskas (Robotics, 2023)

Biodegradable Carrageenan-Based Force Sensor: An Experimental Approach. - Uldis Zaimis; Jurate Jolanta Petroniene; Andrius Dzedzickis; Vytautas Bucinskas (Sensors, 2023)

Experimental Analysis for the Enhancement of Industrial Robot Tool Path Planning. - Mantas Makulavicius; Tadas Rasimavicius; Sigitas Petkevicius; Justas Makutenas; Andrius Dzedzickis (AUTOMATION, 2024)

Research of Microrobot Movement Accuracy. - Viktor Masalskyi; Jurga Subaciute-Zemaitiene; Rokas Bagdonas; Vytautas Bucinskas; Andrius Dzedzickis (AUTOMATION, 2024)

Positioning of Mobile Robots on the Ground. - Shatokhin Oleksii; Vytautas Bucinskas; Andrius Dzedzickis (AUTOMATION, 2024)

Experimental Research of Carrageenan-Based Compression Force Sensors. - Jurate Jolanta Petroniene; Uldis Zaimis; Gediminas Braziulis; Andrius Dzedzickis; Egle Pastarnokiene; Vytautas Bucinskas (AUTOMATION, 2024)

Stretch Sensor: Development of Biodegradable Film. - Uldis Zaimis; Jurate Jolanta Petroniene; Andrius Dzedzickis; Vytautas Bucinskas (Sensors, 2024)

Synchronization of Separate Sensors' Data Transferred through a Local Wi-Fi Network: A Use Case of Human-Gait Monitoring. - Viktor Masalskyi; Dominykas Ciciurenas; Andrius Dzedzickis; Urte Prentice; Gediminas Braziulis; Vytautas Bucinskas (Future Internet, 2024)

Towards Autonomous Driving: Technologies and Data for Vehicles-to-Everything Communication. - Vygantas Usinskis; Mantas Makulavicius; Sigitas Petkevicius; Andrius Dzedzickis; Vytautas Bucinskas (Sensors, 2024)

Piezoelectric Behaviour in Biodegradable Carrageenan and Iron (III) Oxide Based Sensor. - Vytautas Bucinskas; Dainius Udris; Andrius Dzedzickis; Jurate Jolanta Petroniene (Sensors, 2024)

Recent advances in human-robot interaction: robophobia or synergy. - Andrius Dzedzickis; Gediminas Vaiciunas; Karolina Lapkauskaite; Darius Virzonis; Vytautas Bucinskas (J. Intell. Manuf., 2025)