Design Aspects of Conductive Microfiber Rings for Shaft Grounding Purposes. - Annette Muetze; H. William Oh (IAS, 2007)

Operating Area Analysis of Direct and Geared Brushless-DC Motor Drives for Electric Bicycles. - Ewgenij Starschich; Annette Muetze (IAS, 2007)

Simulation Model of Common-Mode Chokes for High-Power Applications. - Charles R. Sullivan; Annette Muetze (IAS, 2007)

Governmental Regulation of Ocean Wave Energy Converter Installations. - Jennifer G. Vining; Annette Muetze (IAS, 2007)

Economic Factors and Incentives for Ocean Wave Energy Conversion. - Jennifer G. Vining; Annette Muetze (IAS, 2007)

Calculation of Circulating Bearing Currents in Machines of Inverter-Based Drive Systems. - Annette Muetze; Andreas Binder (IEEE Trans. Ind. Electron., 2007)

Practical Rules for Assessment of Inverter-Induced Bearing Currents in Inverter-Fed AC Motors up to 500 kW. - Annette Muetze; Andreas Binder (IEEE Trans. Ind. Electron., 2007)

On a New Type of Inverter-Induced Bearing Current in Large Drives with Oil-Lubricated Bearings. - Annette Muetze (IAS, 2008)

Current-Carrying Characteristics of Conductive Microfiber Rings for High Frequencies and Current Amplitudes. - Annette Muetze; H. William Oh (IAS, 2008)

Thousands of hits: on inverter-induced bearing currents, related work, and the literature. - Annette Mütze (Elektrotech. Informationstechnik, 2011)

Liebe Leserin und lieber Leser! Sehr geehrter Herr Professor Dr. Muhr, lieber Michael! - Annette Mütze (Elektrotech. Informationstechnik, 2012)

Comparison of an induction machine with both conventionally distributed and fractional-slot concentrated stator windings. - Johann Peter Bacher; Annette Mütze (Elektrotech. Informationstechnik, 2015)

Efficiency enhancement of a three phase Hard Switching Inverter under light load conditions. - Khaled A. Mahafzah; Klaus Krischan; Annette Muetze (IECON, 2016)

Efficiency enhancement of a three phase Soft Switching Inverter under light load conditions. - Khaled A. Mahafzah; Klaus Krischan; Annette Muetze (IECON, 2016)

The influence of cutting on the magnetic properties of electrical steel sheets and its modeling in electric machine design. - Madeleine Bali; Annette Muetze (Elektrotech. Informationstechnik, 2017)

Modeling the Effect of Cutting on the Magnetic Properties of Electrical Steel Sheets. - Madeleine Bali; Annette Muetze (IEEE Trans. Ind. Electron., 2017)

Low voltage ride through capability of single-phase induction machines. - Johann Peter Bacher; Annette Mütze (Elektrotech. Informationstechnik, 2018)

Small-Signal Stability Analysis of an Inverter-Based Microgrid With Internal Model-Based Controllers. - Stefan Leitner; Mehrdad Yazdanian; Ali Mehrizi-Sani; Annette Muetze (IEEE Trans. Smart Grid, 2018)

Full-size converter operation of hydro power generators: a state-of-the-art review of motivations, solutions, and design implications. - Thomas H. Holzer; Annette Muetze (Elektrotech. Informationstechnik, 2019)

A comparative survey of power converter topologies for full-size converter operation of medium-voltage hydropower generators. - Thomas H. Holzer; Annette Muetze (Elektrotech. Informationstechnik, 2019)

Multi-objective free-form shape optimization of a synchronous reluctance machine. - Peter Gangl; Stefan Köthe; Christiane Mellak; Alessio Cesarano; Annette Mütze (CoRR, 2020)

Noise characterization of automotive auxiliary fan drives. - Stefan Hofmann; Stefan Leitner; Markus Mosshammer; Annette Muetze (Elektrotech. Informationstechnik, 2020)

Performance improvements of auxiliary drives for automotive pump and fan applications. - Annette Muetze; Stefan Leitner; Hannes Gruebler; Felix Krall (Elektrotech. Informationstechnik, 2020)

PCB motors for sub-fractional HP auxiliary fan drives: a feasibility study. - David Auer; Stefan Leitner; Annette Muetze (Elektrotech. Informationstechnik, 2022)

Noise and vibration characteristics of sub-fractional horsepower single-phase BLDC drives. - Nejat Saed; Stefan Leitner; Felix Krall; Annette Muetze (Elektrotech. Informationstechnik, 2022)

Thermal Finite Element Modeling and Simulation of a Squirrel-Cage Induction Machine. - Christian Bergfried; Yvonne Späck-Leigsnering; Roland Seebacher; Heinrich Eickhoff; Annette Muetze (CoRR, 2023)

High Speed Common-Mode Switching in the Context of Highly Integrated Drive Systems. - Hans-Georg Kneidinger; Annette Muetze (IECON, 2024)

CREATOR Case: Permanent Magnet Synchronous Motor Data. - Pawan Kumar Dhakal; Kourosh Heidarikani; Annette Muetze; Roland Seebacher (TU Graz Repo, 2024)

CREATOR Case: Induction Motor Data. - Kourosh Heidarikani; Pawan Kumar Dhakal; Annette Muetze; Roland Seebacher (TU Graz Repo, 2024)

CREATOR Case: PMSM and IM Electric Machine Data for Validation and Benchmarking of Simulation and Modeling Approaches. - Annette Mütze; Kourosh Heidarikani; Pawan Kumar Dhakal; Roland Seebacher; Sebastian Schöps (CoRR, 2025)

Thermal Model Calibration of a Squirrel-Cage Induction Machine. - Leon Blumrich; Christian Bergfried; Armin Galetzka; Herbert De Gersem; Roland Seebacher; Annette Mütze; Yvonne Späck-Leigsnering (CoRR, 2025)