Combining Algebraic Identification and a Least Squares method for DC servomechanism identification. - Ruben Garrido; Antonio Concha (CCE, 2010)

Low cost closed loop identification of a DC motor. - Alberto Soria; Ruben Garrido; Antonio Concha (CCE, 2010)

Algebraic identification of a DC servomechanism using a Least Squares algorithm. - Rubén Alejandro Garrido-Moctezuma; Antonio Concha Sánchez (ACC, 2011)

Parametric identification of seismically excited buildings using acceleration measurements. - Ruben Garrido; Antonio Concha (CCE, 2011)

Inertia and Friction Estimation of a Velocity-Controlled Servo Using Position Measurements. - Ruben Garrido; Antonio Concha (IEEE Trans. Ind. Electron., 2014)

A computer-based educational tool for simulating multifactorial experiments of physical processes. - Antonio Concha; Ana Cristina Delgado Chavez; Nagamani Balagurusamy; Rajeswari Narayanasamy; Suresh Kumar Gadi (Comput. Appl. Eng. Educ., 2018)

Control and Identification Toolbox (CIT): An Android application for teaching automatic control and system identification. - Antonio Concha; David Luviano Cruz; German Calderon; Suresh Kumar Gadi (Comput. Appl. Eng. Educ., 2019)

A tuning algorithm for a sliding mode controller of buildings with ATMD. - Antonio Concha; Suresh Thenozhi; Ramón Octavio Jiménez Betancourt; Suresh Kumar Gadi (CoRR, 2020)

IoT-Based Electricity Bill for Domestic Applications. - Ramón Octavio Jiménez Betancourt; Juan Miguel González-Lopez; Emilio Barocio Espejo; Antonio Concha Sánchez; Efraín Villalvazo Laureano; Sergio Sandoval Pérez; Luis Contreras Aguilar (Sensors, 2020)

Recycling and Updating an Educational Robot Manipulator with Open-Hardware-Architecture. - Antonio Concha Sánchez; Juan Felipe Figueroa-Rodríguez; Andrés Gerardo Fuentes Covarrubias; Ricardo Fuentes Covarrubias; Suresh Kumar Gadi (Sensors, 2020)

Nonlinear Least Squares-based Identification of a Continuous Friction Model. - Antonio Concha Sánchez; Suresh Thenozhi (CCE, 2021)

Adaptive Tracking Control of an Uncertain Duffing-Holmes System. - Suresh Thenozhi; Antonio Concha Sánchez (CCE, 2021)

Observer Design for a Duffing-Holmes System with Uncertainties. - Suresh Thenozhi; Ulises Mondragón Cárdenas; Antonio Concha Sánchez (CCE, 2022)

A Contraction Theory-Based Tracking Control Design With Friction Identification and Compensation. - Suresh Thenozhi; Antonio Concha Sánchez; Juvenal Rodríguez-Reséndiz (IEEE Trans. Ind. Electron., 2022)

mCIT app for teaching and learning the estimation and automatic control of DC motors. - Antonio Concha Sánchez; Suresh Thenozhi; Paulina Poblano Lara; Ramón Octavio Jiménez Betancourt; Suresh Kumar Gadi (Comput. Appl. Eng. Educ., 2023)

UYAMAK: Empowering Model-Based Design and Simulation Through an Open-Source Web Platform. - Antonio Concha Sánchez; Suresh Kumar Gadi (Comput. Appl. Eng. Educ., 2025)