Efficiency Comparison of Cutting Strategies for End Milling Processes Under Feedrate Scheduling. - Soichi Ibaraki; Atsushi Matsubara; Masanori Murozumi (Int. J. Autom. Technol., 2008)

Editorial: Design and Manufacturing Toward Sustainability. - Atsushi Matsubara (Int. J. Autom. Technol., 2009)

Editorial: Measurement and Control in Machine Tools and Machining Process. - Atsushi Matsubara (Int. J. Autom. Technol., 2009)

Monitoring and Control of Cutting Forces in Machining Processes: A Review. - Atsushi Matsubara; Soichi Ibaraki (Int. J. Autom. Technol., 2009)

Analysis Method of Motion Accuracy Using NC System with Synchronized Measurement of Tool-Tip Position. - Kotaro Nagaoka; Atsushi Matsubara; Tomoya Fujita; Tomonori Sato (Int. J. Autom. Technol., 2009)

Development of a High-Performance Spindle for Multitasking Machine Tools. - Taku Yamazaki; Toshiyuki Muraki; Atsushi Matsubara; Mitsuho Aoki; Kenji Iwawaki; Kazuyuki Kawashima (Int. J. Autom. Technol., 2009)

Analysis of Measurement Errors of a Diffuse-Reflection-Type Laser Displacement Sensor for Profile Measurement. - Yoshihiro Kimura; Atsushi Matsubara; Yusuke Koike (Int. J. Autom. Technol., 2012)

Cutting Path Design to Minimize Workpiece Displacement at Cutting Point: Milling of Thin-Walled Parts. - Yusuke Koike; Atsushi Matsubara; Shinji Nishiwaki; Kazuhiro Izui; Iwao Yamaji (Int. J. Autom. Technol., 2012)

Estimation of Dynamic Mechanical Error for Evaluation of Machine Tool Structures. - Daisuke Kono; Sascha Weikert; Atsushi Matsubara; Kazuo Yamazaki (Int. J. Autom. Technol., 2012)

Editorial: Machine Tool Evaluation. - Atsushi Matsubara (Int. J. Autom. Technol., 2012)

Elastic Deformation Error Model for Calibration and Compensation of Parallel Kinematic Mechanism Machine Tool. - Tetsuya Matsushita; Hiroshi Ueno; Atsushi Matsubara (Int. J. Autom. Technol., 2012)

Measurement of Rigidity Change of Preload Switching Spindle. - Taku Yamazaki; Atsushi Matsubara; Shinya Ikenaga (Int. J. Autom. Technol., 2012)

A Study on Analytical Modeling for Machine Tool Production. - Keiichi Ota; Atsushi Matsubara; Hajime Mizuyama (Int. J. Autom. Technol., 2013)

Analysis of Measured Friction of Rolling Balls in Raceway Grooves. - Atsushi Matsubara; Atsuko Sayama; Taku Sakai; Matthias Reuss (Int. J. Autom. Technol., 2014)

Evidence of stochastic resonance of auditory steady-state response in electroencephalogram for brain machine interface. - Fumiya Tanaka; Atsushi Matsubara; Seiji Nishifuji (GCCE, 2015)

Support Placement for Machine Tools Using Stiffness Model. - Kotaro Mori; Daisuke Kono; Iwao Yamaji; Atsushi Matsubara (Int. J. Autom. Technol., 2015)

FEM-Based Simulation for Workpiece Deformation in Thin-Wall Milling. - Jun Wang; Soichi Ibaraki; Atsushi Matsubara; Kosuke Shida; Takayuki Yamada (Int. J. Autom. Technol., 2015)

Eye-gaze independent brain machine interface using steady-state response of brain wave to light and auditory stimuli. - Seiji Nishifuji; Atsushi Matsubara; Akira Iwata; Yuya Sugita; Fumiya Tanaka; Hitoshi Hirano (GCCE, 2016)

Noise-assisted auditory brain computer interface. - Hirotaka Nakamura; Atsushi Matsubara; Seiji Nishifuji (GCCE, 2017)

Brain Computer Interface Using Modulation of Auditory Steady-State Response with Help of Stochastic Resonance*. - Seiji Nishifuji; Hirotaka Nakamura; Atsushi Matsubara (EMBC, 2018)

Auditory Brain Computer Interface Using Neural Network. - Hirotaka Nakamura; Atsushi Matsubara; Seiji Nishifuji (GCCE, 2018)

Model-Based Installation of Viscoelastic Damper Support for Reduction of Residual Vibration. - Kotaro Mori; Daisuke Kono; Iwao Yamaji; Atsushi Matsubara (Int. J. Autom. Technol., 2018)

Impact of Characteristics of Noise Added to Auditory Stimulus on Auditory Steady-State Response. - Kaishi Monobe; Atsushi Matsubara; Seiji Nishifuji (GCCE, 2019)

Modeling Approach for Estimation of Contact and Friction Behavior of Rolling Elements in Linear Bearings. - Matthias Reuss; Taku Sakai; Atsushi Matsubara (Int. J. Autom. Technol., 2019)

Evaluation of Machine Tool Spindle Using Carbon Fiber Composite. - Ryo Kondo; Daisuke Kono; Atsushi Matsubara (Int. J. Autom. Technol., 2020)

Evaluation of Dynamic Characteristics of a Hybrid Guideway System. - Isao Oshita; Atsushi Matsubara; Tsuneto Sumida (Int. J. Autom. Technol., 2020)

Editorial: Advanced Material Driven Design of Machine Tools. - Konrad Wegener; Atsushi Matsubara (Int. J. Autom. Technol., 2020)

Effect of Pink Noise on EEG and Memory Performance in Memory Task. - Akari Hatayama; Atsushi Matsubara; Sota Nakashima; Seiji Nishifuji (GCCE, 2021)

Brain Computer Interface Using Response of Alpha Wave to Word Task. - Seiji Nishifuji; Kazuki Yasunaga; Atsushi Matsubara; Shota Nakashima (GCCE, 2021)

Classification of Three Intentions Based on Auditory Steady State Response to Natural Sound. - Koki Harada; Atsushi Matsubara; Shota Nakashima; Seiji Nishifuji (GCCE, 2022)

Multi-Class Brain Computer Interface Using Steady-State Somatosensory Evoked Potentials. - Riku Kato; Atsushi Matsubara; Shota Nakashima; Seiji Nishifuji (GCCE, 2022)

Quantitative Evaluation of Machined-Surface Gloss Using Visual Simulation and its Application to Sensory Test. - Motohiro Ihara; Iwao Yamaji; Atsushi Matsubara (Int. J. Autom. Technol., 2022)

Multi-Class Brain Computer Interface Based on Steady-State Somatosensory Evoked Potential Elicited From Upper and Contralateral Lower Limbs. - Shunya Nakata; Riku Kato; Atsushi Matsubara; Shota Nakashima; Seiji Nishifuji (GCCE, 2023)

Experimental Characterization of Contact Stiffness for Fixture Design. - Kaho Hirano; Kotaro Mori; Atsushi Matsubara (Int. J. Autom. Technol., 2025)

Editorial: Advanced Design and Performance Evaluation of Production Systems. - Atsushi Matsubara (Int. J. Autom. Technol., 2025)

Static and Dynamic Measurements of Spindle System During Rotation by Noncontact Electromagnetic Loading System. - Shuntaro Yamato; Kazuma Yokohara; Yuki Nara; Atsushi Matsubara (Int. J. Autom. Technol., 2025)