Communication In X-TREE, A Modular Multiprocessor System. - Carlo H. Séquin; Alvin M. Despain; David A. Patterson 001 (ACM Annual Conference (1), 1978)

Design Considerations for the VLSI Processor of X-tree. - David A. Patterson 001; E. Scott Fehr; Carlo H. Séquin (ISCA, 1979)

Special Feature: Instruction in MOS LSI Systems Design. - Carlo H. Séquin (Computer, 1980)

Design Considerations for Single-Chip Computers of the Future. - David A. Patterson 001; Carlo H. Séquin (IEEE Trans. Computers, 1980)

RISC I: A Reduced Instruction Set VLSI Computer. - David A. Patterson 001; Carlo H. Séquin (ISCA, 1981)

Doubly Twisted Torus Networks for VLSI Processing Arrays. - Carlo H. Séquin (ISCA, 1981)

Hypertree: A Multiprocessor Interconnection Topology. - James R. Goodman; Carlo H. Séquin (IEEE Trans. Computers, 1981)

A VLSI RISC. - David A. Patterson 001; Carlo H. Séquin (Computer, 1982)

A RISCy approach to VLSI. - Daniel T. Fitzpatrick; John K. Foderaro; Manolis G. H. Katevenis; Howard A. Landman; David A. Patterson 001; James B. Peek; Zvi Peshkess; Carlo H. Séquin; Robert W. Sherburne; Korbin S. Van Dyke (SIGARCH Comput. Archit. News, 1982)

UNIGRAFIX. - Carlo H. Séquin; Paul S. Strauss (DAC, 1983)

Strategies for Managing the Register File in RISC. - Yuval Tamir; Carlo H. Séquin (IEEE Trans. Computers, 1983)

Design and Application of Self-Testing Comparators Implemented with MOS PLA's. - Yuval Tamir; Carlo H. Séquin (IEEE Trans. Computers, 1984)

Consistent calculations for solids modeling. - Mark Segal; Carlo H. Séquin (SCG, 1985)

Visible Feature Return at Object Resolution. - Carlo H. Séquin; Paul R. Wensley (IEEE Computer Graphics and Applications, 1985)

Two-dimensional compaction by "zone refining". - Hyunchul Shin; Alberto L. Sangiovanni-Vincentelli; Carlo H. Séquin (DAC, 1986)

Plug-in timing models for an abstract timing verifier. - David E. Wallace; Carlo H. Séquin (DAC, 1986)

Highlights of VLSI Research at Berkeley. - Carlo H. Séquin; A. Richard Newton; Alberto L. Sangiovanni-Vincentelli (FJCC, 1986)

Entwurfsautomatisierung bei höchstintegrierten Schaltungen. - Gerd Sandweg; Carlo H. Séquin (Inform. Spektrum, 1986)

Local surface interpolation with Bézier patches. - Leon A. Shirman; Carlo H. Séquin (Comput. Aided Geom. Des., 1987)

ATV: An Abstract Timing Verifier. - David E. Wallace; Carlo H. Séquin (DAC, 1988)

Automatic layout generation for CMOS operational amplifiers. - Han Young Koh; Carlo H. Séquin; Paul R. Gray (ICCAD, 1988)

Codar: a congestion-directed general area router. - Pin-San Tzeng; Carlo H. Séquin (ICCAD, 1988)

Partitioning polyhedral objects into nonintersecting parts. - Mark Segal; Carlo H. Séquin (IEEE Computer Graphics and Applications, 1988)

Template Style Considerations for Sea-of-Gates Layout Generation. - G. D. Adams; Carlo H. Séquin (DAC, 1989)

Parameterized Ray-tracing. - Carlo H. Séquin; E. K. Smyrl (SIGGRAPH, 1989)

Local surface interpolation with shape parameters between adjoining Gregory patches. - Leon A. Shirman; Carlo H. Séquin (Comput. Aided Geom. Des., 1990)

OPASYN: a compiler for CMOS operational amplifiers. - Han Young Koh; Carlo H. Séquin; Paul R. Gray (IEEE Trans. Comput. Aided Des. Integr. Circuits Syst., 1990)

'Zone-refining' techniques for IC layout compaction. - Hyunchul Shin; Alberto L. Sangiovanni-Vincentelli; Carlo H. Séquin (IEEE Trans. Comput. Aided Des. Integr. Circuits Syst., 1990)

Procedural Construction of Patch-Boundary Curves. - Leon A. Shirman; Carlo H. Séquin (Curves and Surfaces, 1991)

Visibility preprocessing for interactive walkthroughs. - Seth J. Teller; Carlo H. Séquin (SIGGRAPH, 1991)

Surface design with minimum energy networks. - Henry P. Moreton; Carlo H. Séquin (Symposium on Solid Modeling and Applications, 1991)

Constructing easily invertible Bezier surfaces that parameterize general quadrics. - Seth J. Teller; Carlo H. Séquin (Symposium on Solid Modeling and Applications, 1991)

Local surface interpolation with Bézier patches: errata and improvements. - Leon A. Shirman; Carlo H. Séquin (Comput. Aided Geom. Des., 1991)

Management of Large Amounts of Data in Interactive Building Walkthroughs. - Thomas A. Funkhouser; Carlo H. Séquin; Seth J. Teller (SI3D, 1992)

Functional optimization for fair surface design. - Henry P. Moreton; Carlo H. Séquin (SIGGRAPH, 1992)

Procedural interpolation with geometrically continuous cubic splines. - Leon A. Shirman; Carlo H. Séquin (Comput. Aided Des., 1992)

Procedural interpolation with curvature-continuous cubic splines. - Leon A. Shirman; Carlo H. Séquin (Comput. Aided Des., 1992)

Scale-Invariant Functionals for Smooth Curves and Surfaces. - Carlo H. Séquin; P.-Y. Chang; Henry P. Moreton (Geometric Modelling, 1993)

Adaptive k-means algorithm with error-weighted deviation measure. - Chedsada Chinrungrueng; Carlo H. Séquin (ICNN, 1993)

Adaptive display algorithm for interactive frame rates during visualization of complex virtual environments. - Thomas A. Funkhouser; Carlo H. Séquin (SIGGRAPH, 1993)

Scale-Invariant Minimum-Cost Curves: Fair and Robust Design Implements. - Henry P. Moreton; Carlo H. Séquin (Comput. Graph. Forum, 1993)

Corner-stitched tiles with curved boundaries [circuit layout]. - Carlo H. Séquin; Heloisa da Silva Facanha (IEEE Trans. Comput. Aided Des. Integr. Circuits Syst., 1993)

6. Minimum Variation Curves and Surfaces for Computer-Aided Geometric Design. - Henry P. Moreton; Carlo H. Séquin (Designing Fair Curves and Surfaces, 1994)

Object Associations: A Simple and Practical Approach to Virtual 3D Manipulation. - Richard W. Bukowski; Carlo H. Séquin (SI3D, 1995)

Optimal adaptive k-means algorithm with dynamic adjustment of learning rate. - Chedsada Chinrungrueng; Carlo H. Séquin (IEEE Trans. Neural Networks, 1995)

Interactive Generation of Scherk-Collins Sculptures. - Carlo H. Séquin; Houman Meshkin; Laura Downs (SI3D, 1997)

Interactive simulation of fire in virtual building environments. - Richard W. Bukowski; Carlo H. Séquin (SIGGRAPH, 1997)

Moving objects in space: exploiting proprioception in virtual-environment interaction. - Mark R. Mine; Frederick P. Brooks Jr.; Carlo H. Séquin (SIGGRAPH, 1997)

Retrospective: RISC I: A Reduced Instruction Set Computer. - David A. Patterson 001; Carlo H. Séquin (25 Years ISCA: Retrospectives and Reprints, 1998)

Generation of 3D building models from 2D architectural plans. - Rick Lewis; Carlo H. Séquin (Comput. Aided Des., 1998)

2D Shape Decomposition and the Automatic Generation of Hierarchical Representations. - Maryann Simmons; Carlo H. Séquin (Int. J. Shape Model., 1998)

Synthesis of bent sheet metal parts from design features. - Roger Bush; Carlo H. Séquin (Symposium on Solid Modeling and Applications, 1999)

A coherent sweep plane slicer for layered manufacturing. - Sara McMains; Carlo H. Séquin (Symposium on Solid Modeling and Applications, 1999)

Parameterized Procedural Synthesis of Artistic Geometry. - Carlo H. Séquin; Jordan Smith (Int. J. Shape Model., 1999)

Tapestry: A Dynamic Mesh-based Display Representation for Interactive Rendering. - Maryann Simmons; Carlo H. Séquin (Rendering Techniques, 2000)

Occlusion horizons for driving through urban scenery. - Laura Downs; Tomas Möller; Carlo H. Séquin (SI3D, 2001)

Escher sphere construction kit. - Jane Yen; Carlo H. Séquin (SI3D, 2001)

Out-of-core build of a topological data structure from polygon soup. - Sara McMains; Joseph M. Hellerstein; Carlo H. Séquin (Symposium on Solid Modeling and Applications, 2001)

CAD and the Arts. - Carlo H. Séquin (Comput. Aided Des., 2001)

Operation decomposition for freeform surface features in process planning. - Ganping Sun; Carlo H. Séquin; Paul K. Wright (Comput. Aided Des., 2001)

CyberCut: An Internet-based CAD/CAM System. - Sung-Hoon Ahn; V. Sundararajan; Charles Smith; Balaji Kannan; Roshan D'Souza; Ganping Sun; Ashish Mohole; Paul K. Wright; Jaeho Kim; Sara McMains; Jordan Smith; Carlo H. Séquin (J. Comput. Inf. Sci. Eng., 2001)

Developable Bézier patches: properties and design. - Chih-Hsing Chu; Carlo H. Séquin (Comput. Aided Des., 2002)

Handling Tool Holder Collision in Optimal Tool Sequence Selection for 2.5-D Pocket Machining. - Roshan D'Souza; Paul K. Wright; Carlo H. Séquin (J. Comput. Inf. Sci. Eng., 2002)

Fair and robust circle splines. - Carlo H. Séquin; Kiha Lee (SIGGRAPH, 2003)

Keynote lecture: aesthetic engineering. - Carlo H. Séquin (Symposium on Solid Modeling and Applications, 2003)

The Manufacturing Advisory Service: web-based process and material selection. - Charles Smith; Paul K. Wright; Carlo H. Séquin (Int. J. Comput. Integr. Manuf., 2003)

Thin-Wall Calculation for Layered Manufacturing. - Sara McMains; Jordan Smith; Carlo H. Séquin (J. Comput. Inf. Sci. Eng., 2003)

Virtual instrument design and animation. - Cynthia Bruyns; Robert Taylor; Carlo H. Séquin (SIGGRAPH Sketches, 2004)

Functionally optimized subdivision surfaces. - Pushkar Joshi; Carlo H. Séquin; Ryo Takahashi (SIGGRAPH Sketches, 2004)

Volution's Evolution. - Carlo H. Séquin (SIGGRAPH Art Gallery, 2004)

Fair LVC-curves on subdivision surfaces. - Carlo H. Séquin; Ling Xiao (SIGGRAPH Sketches, 2004)

Automated tool sequence selection for 3-axis machining of free-form pockets. - Roshan D'Souza; Carlo H. Séquin; Paul K. Wright (Comput. Aided Des., 2004)

Interactive procedural computer-aided design. - Carlo H. Séquin (CAD/Graphics, 2005)

Rapid prototyping: a 3d visualization tool takes on sculpture and mathematical forms. - Carlo H. Séquin (Commun. ACM, 2005)

CAD tools for aesthetic engineering. - Carlo H. Séquin (Comput. Aided Des., 2005)

Fair, G2- and C2-continuous circle splines for the interpolation of sparse data points. - Carlo H. Séquin; Kiha Lee; Jane Yen (Comput. Aided Des., 2005)

Design synthesis of microelectromechanical systems using genetic algorithms with component-based genotype representation. - Ying Zhang; Raffi R. Kamalian; Alice M. Agogino; Carlo H. Séquin (GECCO, 2006)

Hilbert Cube 512. - Carlo H. Séquin (SIGGRAPH Sketches, 2006)

Hilbert Cube. - Carlo H. Séquin (SIGGRAPH Art Gallery, 2006)

Eureka: Euler spiral splines. - Raph Levien; Carlo H. Séquin (SIGGRAPH Posters, 2007)

The regular 4-dimensional 57-cell. - Carlo H. Séquin; James F. Hamlin (SIGGRAPH Sketches, 2007)

An intuitive explanation of third-order surface behavior. - Pushkar Joshi; Carlo H. Séquin (Comput. Aided Geom. Des., 2010)

Interactive construction of 3D mathematical visualization models. - Carlo H. Séquin (SI3D, 2011)

Unknots with highly knotted control polygons. - Justin Bisceglio; Thomas J. Peters; John A. Roulier; Carlo H. Séquin (Comput. Aided Geom. Des., 2011)

Interactive 3D rapid-prototyping models. - Carlo H. Séquin (I3D, 2012)

Keynote presentation: Taking the "virtual" out of virtual reality. - Carlo H. Séquin (VR, 2012)

Keynote Speaker: Taking the "Virtual" Out of Virtual Reality. - Carlo H. Séquin (IEEE Trans. Vis. Comput. Graph., 2012)

Generalized, basis-independent kinematic surface fitting. - James Andrews; Carlo H. Séquin (Comput. Aided Des., 2013)

Making graphics tangible. - Carlo H. Séquin (Comput. Graph., 2013)