View-dependent Deformation for Virtual Human Modeling from Silhouettes. - Charlie C. L. Wang; Yu Wang 010; Matthew M. F. Yuen (VIIP, 2001)

Feature Silhouette Extraction from Photographs for Virtual Human Modeling. - Yu Wang 010; Charlie C. L. Wang; Matthew M. F. Yuen (VIIP, 2001)

Surface flattening based on energy model. - Charlie C. L. Wang; Shana Shiang-Fong Smith; Matthew M. F. Yuen (Comput. Aided Des., 2002)

From laser-scanned data to feature human model: a system based on fuzzy logic concept. - Charlie C. L. Wang; Terry K. K. Chang; Matthew M. F. Yuen (Comput. Aided Des., 2003)

Virtual human modeling from photographs for garment industry. - Charlie C. L. Wang; Yu Wang 010; Terry K. K. Chang; Matthew M. F. Yuen (Comput. Aided Des., 2003)

Feature based 3D garment design through 2D sketches. - Charlie C. L. Wang; Yu Wang 010; Matthew M. F. Yuen (Comput. Aided Des., 2003)

Freeform extrusion by sketched input. - Charlie C. L. Wang; Matthew M. F. Yuen (Comput. Graph., 2003)

Feature-based 3D non-manifold freeform object construction. - Charlie C. L. Wang; Yu Wang 010; Matthew Ming-Fai Yuen (Eng. Comput., 2003)

Developability-preserved free-form deformation of assembled patches. - Charlie C. L. Wang; Kai Tang 001 (Symposium on Solid Modeling and Applications, 2004)

Reduce the stretch in surface flattening by finding cutting paths to the surface boundary. - Charlie C. L. Wang; Yu Wang 010; Kai Tang 001; Matthew M. F. Yuen (Comput. Aided Des., 2004)

CyberTape: an interactive measurement tool on polyhedral surface. - Charlie C. L. Wang (Comput. Graph., 2004)

On increasing the developability of a trimmed NURBS surface. - Charlie C. L. Wang; Yu Wang 010; Matthew M. F. Yuen (Eng. Comput., 2004)

Achieving developability of a polygonal surface by minimum deformation: a study of global and local optimization approaches. - Charlie C. L. Wang; Kai Tang 001 (Vis. Comput., 2004)

Length-preserved natural boundary for intrinsic parameterization. - Charlie C. L. Wang (CAD/Graphics, 2005)

Parameterization and parametric design of mannequins. - Charlie C. L. Wang (Comput. Aided Des., 2005)

Non-self-overlapping Hermite interpolation mapping: a practical solution for structured quadrilateral meshing. - Charlie C. L. Wang; Kai Tang 001 (Comput. Aided Des., 2005)

Freeform surface flattening based on fitting a woven mesh model. - Charlie C. L. Wang; Kai Tang 001; Benjamin M. L. Yeung (Comput. Aided Des., 2005)

Design automation for customized apparel products. - Charlie C. L. Wang; Yu Wang 010; Matthew M. F. Yuen (Comput. Aided Des., 2005)

CAD methods in garment design. - Charlie C. L. Wang; Matthew M. F. Yuen (Comput. Aided Des., 2005)

Modeling Developable Folds on a Strip. - Kai Tang 001; Charlie C. L. Wang (J. Comput. Inf. Sci. Eng., 2005)

Optimal Boundary Triangulations of an Interpolating Ruled Surface. - Charlie C. L. Wang; Kai Tang 001 (J. Comput. Inf. Sci. Eng., 2005)

Blob-based liquid morphing. - Xiaogang Jin 001; Shengjun Liu; Charlie C. L. Wang; Jieqing Feng; Hanqiu Sun (Comput. Animat. Virtual Worlds, 2005)

Sketch Based Mesh Fusion. - Juncong Lin; Xiaogang Jin 001; Charlie C. L. Wang (Computer Graphics International, 2006)

Target Shape Controlled Cloud Animation. - Shengjun Liu; Xiaogang Jin 001; Charlie C. L. Wang (Computer Graphics International, 2006)

Mesh Fitting Based 3D Character Modeling. - Kai-Man Tong; Kin-Chuen Hui; Charlie C. L. Wang (Edutainment, 2006)

Duplicate-skins for compatible mesh modelling. - Yu Wang 010; Charlie C. L. Wang; Matthew M. F. Yuen (Symposium on Solid and Physical Modeling, 2006)

Incremental reconstruction of sharp edges on mesh surfaces. - Charlie C. L. Wang (Comput. Aided Des., 2006)

Fast energy-based surface wrinkle modeling. - Yu Wang 010; Charlie C. L. Wang; Matthew M. F. Yuen (Comput. Graph., 2006)

Water Wave Animation on Mesh Surfaces. - Shengjun Liu; Xiaogang Jin 001; Charlie C. L. Wang; Jim X. Chen (Comput. Sci. Eng., 2006)

Minimum Area Convex Packing of Two Convex Polygons. - Kai Tang 001; Charlie C. L. Wang; Danny Z. Chen (Int. J. Comput. Geom. Appl., 2006)

Bilateral Recovering of Sharp Edges on Feature-Insensitive Sampled Meshes. - Charlie C. L. Wang (IEEE Trans. Vis. Comput. Graph., 2006)

Mesh fusion using functional blending on topologically incompatible sections. - Xiaogang Jin 001; Juncong Lin; Charlie C. L. Wang; Jieqing Feng; Hanqiu Sun (Vis. Comput., 2006)

Ellipsoid-tree construction for solid objects. - Shengjun Liu; Charlie C. L. Wang; Kin-Chuen Hui; Xiaogang Jin 001; Hanli Zhao (Symposium on Solid and Physical Modeling, 2007)

Interactive control of real-time crowd navigation in virtual environment. - Xiaogang Jin 001; Charlie C. L. Wang; Shengsheng Huang; Jiayi Xu 002 (VRST, 2007)

Direct extraction of surface meshes from implicitly represented heterogeneous volumes. - Charlie C. L. Wang (Comput. Aided Des., 2007)

Woven model based geometric design of elastic medical braces. - Charlie C. L. Wang; Kai Tang 001 (Comput. Aided Des., 2007)

Ellipsoidal-blob approximation of 3D models and its applications. - Shengjun Liu; Xiaogang Jin 001; Charlie C. L. Wang; Kin-Chuen Hui (Comput. Graph., 2007)

Gradient based image completion by solving the Poisson equation. - Jianbing Shen; Xiaogang Jin 001; Chuan Zhou 008; Charlie C. L. Wang (Comput. Graph., 2007)

Real-Time Collaborative Design With Heterogeneous CAD Systems Based on Neutral Modeling Commands. - Min Li 029; Shuming Gao; Charlie C. L. Wang (J. Comput. Inf. Sci. Eng., 2007)

Volume Parameterization for Design Automation of Customized Free-Form Products. - Charlie C. L. Wang; Kin-Chuen Hui; Kai-Man Tong (IEEE Trans Autom. Sci. Eng., 2007)

Automatic PolyCube-Maps. - Juncong Lin; Xiaogang Jin 001; Zhengwen Fan; Charlie C. L. Wang (GMP, 2008)

Pattern computation for compression garment. - Charlie C. L. Wang; Kai Tang 001 (Symposium on Solid and Physical Modeling, 2008)

A least-norm approach to flattenable mesh surface processing. - Charlie C. L. Wang (Shape Modeling International, 2008)

Towards flattenable mesh surfaces. - Charlie C. L. Wang (Comput. Aided Des., 2008)

WireWarping: A fast surface flattening approach with length-preserved feature curves. - Charlie C. L. Wang (Comput. Aided Des., 2008)

Interactive Control of Large-Crowd Navigation in Virtual Environments Using Vector Fields. - Xiaogang Jin 001; Jiayi Xu 002; Charlie C. L. Wang; Shengsheng Huang; Jun Zhang (IEEE Computer Graphics and Applications, 2008)

Computer aided geometric design of strip using developable Bézier patches. - Chih-Hsing Chu; Charlie C. L. Wang; Chi-Rung Tsai (Comput. Ind., 2008)

Efficient and Stable Simulation of Cloth Undergoing Large Rotations. - Chuan Zhou 008; Xiaogang Jin 001; Charlie C. L. Wang (Comput. Sci. Eng., 2008)

Flattenable Mesh Surface Fitting on Boundary Curves. - Charlie C. L. Wang (J. Comput. Inf. Sci. Eng., 2008)

Extracting Manifold and Feature-Enhanced Mesh Surfaces From Binary Volumes. - Charlie C. L. Wang (J. Comput. Inf. Sci. Eng., 2008)

Shear buckling and dynamic bending in cloth simulation. - Chuan Zhou 008; Xiaogang Jin 001; Charlie C. L. Wang (Comput. Animat. Virtual Worlds, 2008)

Mesh Composition on Models with Arbitrary Boundary Topology. - Juncong Lin; Xiaogang Jin 001; Charlie C. L. Wang; Kin-Chuen Hui (IEEE Trans. Vis. Comput. Graph., 2008)

Computing Length-Preserved Free Boundary for Quasi-Developable Mesh Segmentation. - Charlie C. L. Wang (IEEE Trans. Vis. Comput. Graph., 2008)

Approximating solid objects by ellipsoid-tree. - Shengjun Liu; Charlie C. L. Wang; Kin-Chuen Hui; Xiaogang Jin 001; Hanli Zhao (CAD/Graphics, 2009)

Interactive Image Inpainting Using DCT Based Exemplar Matching. - Tsz-Ho Kwok; Charlie C. L. Wang (ISVC (2), 2009)

Robust mesh reconstruction from unoriented noisy points. - Hoi Sheung; Charlie C. L. Wang (Symposium on Solid and Physical Modeling, 2009)

Duplex fitting of zero-level and offset surfaces. - Shengjun Liu; Charlie C. L. Wang (Comput. Aided Des., 2009)

A note on least-norm solution of global WireWarping. - Charlie C. L. Wang (Comput. Aided Des., 2009)

Fireworks controller. - Hanli Zhao; Ran Fan; Charlie C. L. Wang; Xiaogang Jin 001; Yuwei Meng (Comput. Animat. Virtual Worlds, 2009)

Volume and complexity bounded simplification of solid model represented by binary space partition. - Pu Huang; Charlie C. L. Wang (Symposium on Solid and Physical Modeling, 2010)

Solid modeling of polyhedral objects by Layered Depth-Normal Images on the GPU. - Charlie C. L. Wang; Yuen-Shan Leung; Yong Chen 017 (Comput. Aided Des., 2010)

Pattern computation for compression garment by a physical/geometric approach. - Charlie C. L. Wang; Kai Tang 001 (Comput. Aided Des., 2010)

Orienting unorganized points for surface reconstruction. - Shengjun Liu; Charlie C. L. Wang (Comput. Graph., 2010)

From Designing Products to Fabricating Them from Planar Materials. - Charlie C. L. Wang (IEEE Computer Graphics and Applications, 2010)

Exemplar-based statistical model for semantic parametric design of human body. - Chih-Hsing Chu; Ya-Tien Tsai; Charlie C. L. Wang; Tsz-Ho Kwok (Comput. Ind., 2010)

Soft products development. - Charlie C. L. Wang; Chih-Hsing Chu (Comput. Ind., 2010)

Layered Depth-Normal Images: a Sparse Implicit Representation of Solid Models - Charlie C. L. Wang; Yong Chen 017 (CoRR, 2010)

Toward Stable and Realistic Haptic Interaction for Tooth Preparation Simulation. - Jun Wu 005; Dangxiao Wang; Charlie C. L. Wang; Yuru Zhang (J. Comput. Inf. Sci. Eng., 2010)

Smooth force rendering on coarse polygonal meshes. - Jun Wu 005; Yuen-Shan Leung; Charlie C. L. Wang; Dangxiao Wang; Yuru Zhang (Comput. Animat. Virtual Worlds, 2010)

Fast Query for Exemplar-Based Image Completion. - Tsz-Ho Kwok; Hoi Sheung; Charlie C. L. Wang (IEEE Trans. Image Process., 2010)

Fusion of disconnected mesh components with branching shapes. - Juncong Lin; Xiaogang Jin 001; Charlie C. L. Wang (Vis. Comput., 2010)

Uniform offsetting of polygonal model based on Layered Depth-Normal Images. - Yong Chen 017; Charlie C. L. Wang (Comput. Aided Des., 2011)

Localized construction of curved surfaces from polygon meshes: A simple and practical approach on GPU. - Yuen-Shan Leung; Charlie C. L. Wang; Yunbo Zhang (Comput. Aided Des., 2011)

Realizing CAD/CAM by polygonal meshes. - Charlie C. L. Wang (Comput. Aided Des., 2011)

Automatic design of conformal cooling circuits for rapid tooling. - Yu Wang 010; Kai-Min Yu; Charlie C. L. Wang; Yunbo Zhang (Comput. Aided Des., 2011)

Computing on rays: A parallel approach for surface mesh modeling from multi-material volumetric data. - Charlie C. L. Wang (Comput. Ind., 2011)

Strip approximation with Bézier patches in conical form for design and manufacturing of developable materials. - Chih-Hsing Chu; Charlie C. L. Wang; Chi-Rung Tsai (Int. J. Comput. Integr. Manuf., 2011)

Bending-Invariant Correspondence Matching on 3-D Human Bodies for Feature Point Extraction. - Samuel S.-M. Li; Charlie C. L. Wang; Kin-Chuen Hui (IEEE Trans Autom. Sci. Eng., 2011)

Fast Intersection-Free Offset Surface Generation From Freeform Models With Triangular Meshes. - Shengjun Liu; Charlie C. L. Wang (IEEE Trans Autom. Sci. Eng., 2011)

WireWarping++: Robust and Flexible Surface Flattening With Length Control. - Yunbo Zhang; Charlie C. L. Wang (IEEE Trans Autom. Sci. Eng., 2011)

Approximate Boolean Operations on Large Polyhedral Solids with Partial Mesh Reconstruction. - Charlie C. L. Wang (IEEE Trans. Vis. Comput. Graph., 2011)

Parallel and efficient Boolean on polygonal solids. - Hanli Zhao; Charlie C. L. Wang; Yong Chen 017; Xiaogang Jin 001 (Vis. Comput., 2011)

Flexible shape control for automatic resizing of apparel products. - Yuwei Meng; Charlie C. L. Wang; Xiaogang Jin 001 (Comput. Aided Des., 2012)

Quasi-interpolation for surface reconstruction from scattered data with radial basis function. - Shengjun Liu; Charlie C. L. Wang (Comput. Aided Geom. Des., 2012)

Iterative Consolidation of Unorganized Point Clouds. - Shengjun Liu; Kwan-Chung Chan; Charlie C. L. Wang (IEEE Computer Graphics and Applications, 2012)

Constructing common base domain by cues from Voronoi diagram. - Tsz-Ho Kwok; Yunbo Zhang; Charlie C. L. Wang (Graph. Model., 2012)

Efficient Optimization of Common Base Domains for Cross Parameterization. - Tsz-Ho Kwok; Yunbo Zhang; Charlie C. L. Wang (IEEE Trans. Vis. Comput. Graph., 2012)

Geometric Modeling and Reasoning of Human-Centered Freeform Products. - Charlie C. L. Wang (Springer, 2013)

GPU-based offset surface computation using point samples. - Charlie C. L. Wang; Dinesh Manocha (Comput. Aided Des., 2013)

Conservative Sampling of Solids in Image Space. - Yuen-Shan Leung; Charlie C. L. Wang (IEEE Computer Graphics and Applications, 2013)

Recent technology in design and manufacturing automation. - Charlie C. L. Wang (Int. J. Comput. Integr. Manuf., 2013)

Intersection-Free and Topologically Faithful Slicing of Implicit Solid. - Pu Huang; Charlie C. L. Wang; Yong Chen 017 (J. Comput. Inf. Sci. Eng., 2013)

Improved Skeleton Tracking by Duplex Kinects: A Practical Approach for Real-Time Applications. - Kwok-Yun Yeung; Tsz-Ho Kwok; Charlie C. L. Wang (J. Comput. Inf. Sci. Eng., 2013)

Efficient Boundary Extraction of BSP Solids Based on Clipping Operations. - Charlie C. L. Wang; Dinesh Manocha (IEEE Trans. Vis. Comput. Graph., 2013)

Surface-from-Gradients: An Approach Based on Discrete Geometry Processing. - Wuyuan Xie; Yunbo Zhang; Charlie C. L. Wang; Ronald Chi-kit Chung (CVPR, 2014)

Pedalvatar: An IMU-based real-time body motion capture system using foot rooted kinematic model. - Yang Zheng; Ka-Chun Chan; Charlie C. L. Wang (IROS, 2014)

3D printing oriented design: geometry and optimization. - Ligang Liu 001; Ariel Shamir; Charlie C. L. Wang; Emily Whiting (SIGGRAPH ASIA Courses, 2014)

Shape optimization for human-centric products with standardized components. - Tsz-Ho Kwok; Charlie C. L. Wang (Comput. Aided Des., 2014)

Multi-dimensional dynamic programming in ruled surface fitting. - Charlie C. L. Wang; Gershon Elber (Comput. Aided Des., 2014)

Domain construction for volumetric cross-parameterization. - Tsz-Ho Kwok; Charlie C. L. Wang (Comput. Graph., 2014)

Highly Parallel Algorithms for Visual-Perception-Guided Surface Remeshing. - Lianping Xing; Xiaoting Zhang; Charlie C. L. Wang; Kin-Chuen Hui (IEEE Computer Graphics and Applications, 2014)

Deformation with enforced metrics on length, area and volume. - Shuo Jin; Yunbo Zhang; Charlie C. L. Wang (Comput. Graph. Forum, 2014)

Progressive segmentation for MRR-based feed-rate optimization in CNC machining. - Ka-Chun Chan; Charlie C. L. Wang (CASE, 2015)

Direct computation of minimal rotation for support slimming. - Kailun Hu; Xiaoting Zhang; Charlie C. L. Wang (CASE, 2015)

Photometric stereo with near point lighting: A solution by mesh deformation. - Wuyuan Xie; Chengkai Dai; Charlie C. L. Wang (CVPR, 2015)

Computing stable contact interface for customized surgical jigs. - Xiaoting Zhang; Ka-Chun Chan; Charlie C. L. Wang; Kwok-Chuen Wong; Shekhar-Madhukar Kumta (ICRA, 2015)

Robust and GPU-friendly Isotropic Meshing Based on Narrow-banded Euclidean Distance Transformation. - Yuen-Shan Leung; Xiaoning Wang; Ying He 001; Yong-Jin Liu 001; Charlie C. L. Wang (PG (Short Papers), 2015)

Spiral and conformal cooling in plastic injection molding. - Yu Wang 010; Kai-Min Yu; Charlie C. L. Wang (Comput. Aided Des., 2015)

Corrigendum to "Spiral and conformal cooling in plastic injection molding" [J. Comput. Aided Des. 63C (2015) 1-11]. - Yu Wang 010; Kai-Min Yu; Charlie C. L. Wang (Comput. Aided Des., 2015)

Corrigendum to "Automatic design of conformal cooling circuits for rapid tooling" [J. Comput.-Aided Des. 43(8) (2011) 1001-1010]. - Yu Wang 010; Kai-Min Yu; Charlie C. L. Wang; Yunbo Zhang (Comput. Aided Des., 2015)

The status, challenges, and future of additive manufacturing in engineering. - Wei Gao; Yunbo Zhang; Devarajan Ramanujan; Karthik Ramani; Yong Chen 017; Christopher B. Williams; Charlie C. L. Wang; Yung C. Shin; Song Zhang 002; Pablo D. Zavattieri (Comput. Aided Des., 2015)

Support slimming for single material based additive manufacturing. - Kailun Hu; Shuo Jin; Charlie C. L. Wang (Comput. Aided Des., 2015)

Geometric and Physical Modeling for Additive Manufacturing. - Charlie C. L. Wang; Yong Chen 017 (Comput. Aided Des., 2015)

A Closed-Form Formulation of HRBF-Based Surface Reconstruction. - Shengjun Liu; Charlie C. L. Wang; Guido Brunnett; Jun Wang 039 (CoRR, 2015)

Meshfree C^2-Weighting for Shape Deformation. - Chuhua Xian; Shuo Jin; Charlie C. L. Wang (CoRR, 2015)

A unified framework for isotropic meshing based on narrow-band Euclidean distance transformation. - Yuen-Shan Leung; Xiaoning Wang; Ying He 001; Yong-Jin Liu 001; Charlie C. L. Wang (Comput. Vis. Media, 2015)

Multiregion Segmentation Based on Compact Shape Prior. - Ran Fan; Xiaogang Jin 001; Charlie C. L. Wang (IEEE Trans Autom. Sci. Eng., 2015)

Nonsmooth Developable Geometry for Interactively Animating Paper Crumpling. - Camille Schreck; Damien Rohmer; Stefanie Hahmann; Marie-Paule Cani; Shuo Jin; Charlie C. L. Wang; Jean-Francis Bloch (ACM Trans. Graph., 2015)

Perceptual models of preference in 3D printing direction. - Xiaoting Zhang; Xinyi Le; Athina Panotopoulou; Emily Whiting; Charlie C. L. Wang (ACM Trans. Graph., 2015)

Steering micro-robotic swarm by dynamic actuating fields. - Qianwen Chao; Jiangfan Yu; Chengkai Dai; Tiantian Xu 001; Li Zhang 010; Charlie C. L. Wang; Xiaogang Jin 001 (ICRA, 2016)

Rope caging and grasping. - Tsz-Ho Kwok; Weiwei Wan; Jia Pan 001; Charlie C. L. Wang; Jianjun Yuan 003; Kensuke Harada; Yong Chen 017 (ICRA, 2016)

Delta DLP 3D printing with large size. - Chenming Wu; Ran Yi; Yong-Jin Liu 001; Ying He 001; Charlie C. L. Wang (IROS, 2016)

RoboDLP: large object 3D printing using robotic arm. - Ran Yi; Chenming Wu; Yong-Jin Liu 001; Charlie C. L. Wang (SIGGRAPH Asia Posters, 2016)

Editorial. - Thomas A. Grandine; Scott Schaefer; Charlie C. L. Wang (Comput. Aided Des., 2016)

A closed-form formulation of HRBF-based surface reconstruction by approximate solution. - Shengjun Liu; Charlie C. L. Wang; Guido Brunnett; Jun Wang 039 (Comput. Aided Des., 2016)

Self-supporting rhombic infill structures for additive manufacturing. - Jun Wu 005; Charlie C. L. Wang; Xiaoting Zhang; Rüdiger Westermann (Comput. Aided Des., 2016)

Data-Driven Bending Elasticity Design by Shell Thickness. - Xiaoting Zhang; Xinyi Le; Zihao Wu; Emily Whiting; Charlie C. L. Wang (Comput. Graph. Forum, 2016)

Special Issue: Innovative Design and Manufacturing. - Charlie Wang 001; Giorgio Colombo 002; Chikit Au (J. Comput. Inf. Sci. Eng., 2016)

Styling Evolution for Tight-Fitting Garments. - Tsz-Ho Kwok; Yanqiu Zhang; Charlie C. L. Wang; Yong-Jin Liu 001; Kai Tang 001 (IEEE Trans. Vis. Comput. Graph., 2016)

Topology Optimization for Computational Fabrication. - Jun Wu 005; Niels Aage; Sylvain Lefebvre 001; Charlie C. L. Wang (Eurographics (Tutorials), 2017)

RoboFDM: A robotic system for support-free fabrication using FDM. - Chenming Wu; Chengkai Dai; Guoxin Fang; Yong-Jin Liu 001; Charlie C. L. Wang (ICRA, 2017)

EasySRRobot: An easy-to-build self-reconfigurable robot with optimized design. - Minjing Yu; Yong-Jin Liu 001; Charlie C. L. Wang (ROBIO, 2017)

Thermal-Comfort Design of Personalized Casts. - Xiaoting Zhang; Guoxin Fang; Chengkai Dai; Jouke Verlinden; Jun Wu 005; Emily Whiting; Charlie C. L. Wang (UIST, 2017)

Coherent spherical range-search for dynamic points on GPUs. - Lianping Xing; Charlie C. L. Wang; Kin-Chuen Hui (Comput. Aided Des., 2017)

Isogeometric computation reuse method for complex objects with topology-consistent volumetric parameterization. - Gang Xu 001; Tsz-Ho Kwok; Charlie C. L. Wang (Comput. Aided Des., 2017)

Motion Imitation Based on Sparsely Sampled Correspondence. - Shuo Jin; Chengkai Dai; Yang Liu 014; Charlie C. L. Wang (J. Comput. Inf. Sci. Eng., 2017)

Cross section-based hollowing and structural enhancement. - Weiming Wang 003; Baojun Li; Sicheng Qian; Yong-Jin Liu 001; Charlie C. L. Wang; Ligang Liu 001; Baocai Yin; Xiuping Liu (Vis. Comput., 2017)

Geometry-based Direct Simulation for Multi-Material Soft Robots. - Guoxin Fang; Christopher-Denny Matte; Tsz-Ho Kwok; Charlie C. L. Wang (ICRA, 2018)

Color-Based Sensing of Bending Deformation on Soft Robots. - Rob B. N. Scharff; Rens M. Doornbusch; Xander L. Klootwijk; Ajinkya A. Doshi; Eugeni L. Doubrovski; Jun Wu 005; Jo M. P. Geraedts; Charlie C. L. Wang (ICRA, 2018)

Tangible interaction with 3D printed modular robots through multi-channel sensors. - Minjing Yu; Yong-Jin Liu 001; Guozhen Zhao; Charlie C. L. Wang (SIGGRAPH ASIA Posters, 2018)

Interactive Partitioning of 3D Models into Printable Parts. - Aamir Khan Jadoon; Chenming Wu; Yong-Jin Liu 001; Ying He 001; Charlie C. L. Wang (IEEE Computer Graphics and Applications, 2018)

Efficient C2-Weighting for Image Warping. - Chuhua Xian; Shuo Jin; Charlie C. L. Wang (IEEE Computer Graphics and Applications, 2018)

General Support-Effective Decomposition for Multi-Directional 3D Printing. - Chenming Wu; Chengkai Dai; Guoxin Fang; Yong-Jin Liu 001; Charlie C. L. Wang (CoRR, 2018)

Generating sparse self-supporting wireframe models for 3D printing using mesh simplification. - Xiuping Liu; Liping Lin; Jun Wu 005; Weiming Wang 003; Baocai Yin; Charlie C. L. Wang (Graph. Model., 2018)

Delta DLP 3-D Printing of Large Models. - Ran Yi; Chenming Wu; Yong-Jin Liu 001; Ying He 001; Charlie C. L. Wang (IEEE Trans Autom. Sci. Eng., 2018)

Support-free volume printing by multi-axis motion. - Chengkai Dai; Charlie C. L. Wang; Chenming Wu; Sylvain Lefebvre 001; Guoxin Fang; Yong-Jin Liu 001 (ACM Trans. Graph., 2018)

Support-Free Hollowing. - Weiming Wang 003; Yong-Jin Liu 001; Jun Wu 005; Shengjing Tian; Charlie C. L. Wang; Ligang Liu 001; Xiuping Liu (IEEE Trans. Vis. Comput. Graph., 2018)

Monocular Image Based 3D Model Retrieval. - Wenhui Li 001; Anan Liu; Weizhi Nie; Dan Song 006; Yuqian Li; Weijie Wang; Shu Xiang; Heyu Zhou; Ngoc-Minh Bui; Yunchi Cen; Zenian Chen; Huy-Hoang Chung-Nguyen; et al. (3DOR@Eurographics, 2019)

A Learning-Based Approach for Perceptual Models of Preference. - Junhui Mei; Xinyi Le; Xiaoting Zhang; Charlie C. L. Wang (ISNN (1), 2019)

Reducing Out-of-Plane Deformation of Soft Robotic Actuators for Stable Grasping. - Rob B. N. Scharff; Jun Wu 005; Jo M. P. Geraedts; Charlie C. L. Wang (RoboSoft, 2019)

Design of 3D Wireless Power Transfer System Based on 3D Printed Electronics. - Tao Hou; Jun Xu 039; Willemijn S. Elkhuizen; Charlie C. L. Wang; Jiehui Jiang; Jo M. P. Geraedts; Yu Song 003 (IEEE Access, 2019)

CrossFill: Foam Structures with Graded Density for Continuous Material Extrusion. - Tim Kuipers; Jun Wu 005; Charlie C. L. Wang (Comput. Aided Des., 2019)

Adaptive slicing based on efficient profile analysis. - Huachao Mao; Tsz-Ho Kwok; Yong Chen 017; Charlie C. L. Wang (Comput. Aided Des., 2019)

Mesh-Based Computation for Solving Photometric Stereo With Near Point Lighting. - Wuyuan Xie; Ying Nie; Zhan Song; Charlie C. L. Wang (IEEE Computer Graphics and Applications, 2019)

Challenges and Status on Design and Computation for Emerging Additive Manufacturing Technologies. - Yuen-Shan Leung; Tsz-Ho Kwok; Xiangjia Li; Yang Yang; Charlie C. L. Wang; Yong Chen 017 (J. Comput. Inf. Sci. Eng., 2019)

Energy-Efficient Coverage Path Planning for General Terrain Surfaces. - Chenming Wu; Chengkai Dai; Xiaoxi Gong; Yong-Jin Liu 001; Jun Wang 039; Xianfeng David Gu; Charlie C. L. Wang (IEEE Robotics Autom. Lett., 2019)

Plant Phenotyping by Deep-Learning-Based Planner for Multi-Robots. - Chenming Wu; Rui Zeng; Jia Pan 001; Charlie C. L. Wang; Yong-Jin Liu 001 (IEEE Robotics Autom. Lett., 2019)

CurviSlicer: slightly curved slicing for 3-axis printers. - Jimmy Etienne; Nicolas Ray; Daniele Panozzo; Samuel Hornus; Charlie C. L. Wang; Jonàs Martínez; Sara McMains; Marc Alexa; Brian Wyvill; Sylvain Lefebvre 001 (ACM Trans. Graph., 2019)

LineUp: Computing Chain-Based Physical Transformation. - Minjing Yu; Zipeng Ye; Yong-Jin Liu 001; Ying He 001; Charlie C. L. Wang (ACM Trans. Graph., 2019)

Computational design of fabric formwork. - Xiaoting Zhang; Guoxin Fang; Mélina Skouras; Gwenda Gieseler; Charlie C. L. Wang; Emily Whiting (ACM Trans. Graph., 2019)

Bas-Relief Modeling from Normal Layers. - Mingqiang Wei; Yang Tian; Wai-Man Pang; Charlie C. L. Wang; Ming-Yong Pang; Jun Wang 039; Jing Qin 001; Pheng-Ann Heng (IEEE Trans. Vis. Comput. Graph., 2019)

Soft Robotic Module for Sensing and Controlling Contact Force. - Alice Buso; Rob B. N. Scharff; Eugeni L. Doubrovski; Jun Wu 005; Charlie C. L. Wang; Peter Vink (RoboSoft, 2020)

Organic Open-cell Porous Structure Modeling. - Lihao Tian; Lin Lu 001; Weikai Chen 001; Yang Xia; Charlie C. L. Wang; Wenping Wang 001 (SCF, 2020)

A Framework for Adaptive Width Control of Dense Contour-Parallel Toolpaths in Fused Deposition Modeling. - Tim Kuipers; Eugeni L. Doubrovski; Jun Wu 005; Charlie C. L. Wang (Comput. Aided Des., 2020)

Data-Driven Human Modeling by Sparse Representation. - Yiu-Bun Wu; Bin Liu 057; Xiuping Liu; Charlie C. L. Wang (Comput. Aided Des., 2020)

Length-optimal tool path planning for freeform surfaces with preferred feed directions. - Qiang Zou; Charlie C. L. Wang; Hsi-Yung Feng (CoRR, 2020)

Multi-Scale Progressive Fusion Learning for Depth Map Super-Resolution. - Chuhua Xian; Kun Qian 019; Zitian Zhang; Charlie C. L. Wang (CoRR, 2020)

Sensing and Reconstruction of 3D Deformation on Pneumatic Soft Robots. - Rob B. N. Scharff; Guoxin Fang; Yingjun Tian; Jun Wu 005; Jo M. P. Geraedts; Charlie C. L. Wang (CoRR, 2020)

Jacobian-based learning for inverse kinematics of soft robots. - Guoxin Fang; Yingjun Tian; Zhi-Xin Yang; Jo M. P. Geraedts; Charlie C. L. Wang (CoRR, 2020)

Learning to Accelerate Decomposition for Multi-Directional 3D Printing. - Chenming Wu; Yong-Jin Liu 001; Charlie C. L. Wang (IEEE Robotics Autom. Lett., 2020)

Planning Jerk-Optimized Trajectory With Discrete Time Constraints for Redundant Robots. - Chengkai Dai; Sylvain Lefebvre 001; Kai-Ming Yu; Jo M. P. Geraedts; Charlie C. L. Wang (IEEE Trans Autom. Sci. Eng., 2020)

General Support-Effective Decomposition for Multi-Directional 3-D Printing. - Chenming Wu; Chengkai Dai; Guoxin Fang; Yong-Jin Liu 001; Charlie C. L. Wang (IEEE Trans Autom. Sci. Eng., 2020)

Reinforced FDM: multi-axis filament alignment with controlled anisotropic strength. - Guoxin Fang; Tianyu Zhang 007; Sikai Zhong; Xiangjia Chen; Zichun Zhong; Charlie C. L. Wang (ACM Trans. Graph., 2020)

Kinematics of Soft Robots by Geometric Computing. - Guoxin Fang; Christopher-Denny Matte; Rob B. N. Scharff; Tsz-Ho Kwok; Charlie C. L. Wang (IEEE Trans. Robotics, 2020)

Field-Based Toolpath Generation for 3D Printing Continuous Fibre Reinforced Thermoplastic Composites. - Xiangjia Chen; Guoxin Fang; Wei-Hsin Liao; Charlie C. L. Wang (CoRR, 2021)

Should subscription-revenue internet content providers adopt sponsored data plans by mobile telecom carriers in duopoly market? - Charlie Wang 001; Minqiang Li; Haiyang Feng; Nan Feng (Electron. Commer. Res. Appl., 2021)

Memory-Efficient Modeling and Slicing of Large-Scale Adaptive Lattice Structures. - Shengjun Liu; Tao Liu 059; Qiang Zou; Weiming Wang 003; Eugeni L. Doubrovski; Charlie C. L. Wang (J. Comput. Inf. Sci. Eng., 2021)

Singularity-Aware Motion Planning for Multi-Axis Additive Manufacturing. - Tianyu Zhang 007; Xiangjia Chen; Guoxin Fang; Yingjun Tian; Charlie C. L. Wang (IEEE Robotics Autom. Lett., 2021)

Fast Generation of High-Fidelity RGB-D Images by Deep Learning With Adaptive Convolution. - Chuhua Xian; Dongjiu Zhang; Chengkai Dai; Charlie C. L. Wang (IEEE Trans Autom. Sci. Eng., 2021)

Knitting 4D garments with elasticity controlled for body motion. - Zishun Liu; Xingjian Han; Yuchen Zhang; Xiangjia Chen; Yu-Kun Lai; Eugeni L. Doubrovski; Emily Whiting; Charlie C. L. Wang (ACM Trans. Graph., 2021)

Collision-Aware Fast Simulation for Soft Robots by Optimization-Based Geometric Computing. - Guoxin Fang; Yingjun Tian; Andrew Weightman; Charlie C. L. Wang (IROS, 2022)

IGA-Reuse-NET: A deep-learning-based isogeometric analysis-reuse approach with topology-consistent parameterization. - Dandan Wang; Jinlan Xu; Fei Gao 006; Charlie C. L. Wang; Renshu Gu; Fei Lin; Timon Rabczuk; Gang Xu 001 (Comput. Aided Geom. Des., 2022)

Foreword to the Special Section on Computational Fabrication. - Yunbo Zhang; Emily Whiting; Cynthia Sung 001; Charlie C. L. Wang (Comput. Graph., 2022)

Soft Robotic Mannequin: Design and Algorithm for Deformation Control. - Yingjun Tian; Guoxin Fang; Justas Petrulis; Andrew Weightman; Charlie C. L. Wang (CoRR, 2022)

Concise and Effective Network for 3D Human Modeling From Orthogonal Silhouettes. - Bin Liu 057; Xiuping Liu; Zhixin Yang; Charlie C. L. Wang (J. Comput. Inf. Sci. Eng., 2022)

Optimizing Out-of-Plane Stiffness for Soft Grippers. - Renbo Su; Yingjun Tian; Mingwei Du; Charlie C. L. Wang (IEEE Robotics Autom. Lett., 2022)

HRBF-Fusion: Accurate 3D Reconstruction from RGB-D Data Using On-the-fly Implicits. - Yabin Xu; Liangliang Nan; Laishui Zhou; Jun Wang 039; Charlie C. L. Wang (ACM Trans. Graph., 2022)

S3-Slicer: A General Slicing Framework for Multi-Axis 3D Printing. - Tianyu Zhang 007; Guoxin Fang; Yuming Huang; Neelotpal Dutta; Sylvain Lefebvre 001; Zekai Murat Kilic; Charlie C. L. Wang (ACM Trans. Graph., 2022)

OpenPneu: Compact Platform for Pneumatic Actuation with Multi-Channels. - Yingjun Tian; Renbo Su; Xilong Wang; Nur Banu Altin; Guoxin Fang; Charlie C. L. Wang (AIM, 2023)

Photogrammetric Reconstruction of a Stolen Statue. - Zishun Liu; Eugeni L. Doubrovski; Jo M. P. Geraedts; Wenting Wang; Yeung Yam; Charlie C. L. Wang (Eurographics (Short Papers), 2023)

Support Generation for Robot-Assisted 3D Printing with Curved Layers. - Tianyu Zhang 007; Yuming Huang; Piotr Kukulski; Neelotpal Dutta; Guoxin Fang; Charlie C. L. Wang (ICRA, 2023)

Spring-IMU Fusion Based Proprioception for Feedback Control of Soft Manipulators. - Yinan Meng; Guoxin Fang; Jiong Yang; Yuhu Guo; Charlie C. L. Wang (CoRR, 2023)

Exceptional Mechanical Performance by Spatial Printing with Continuous Fiber. - Guoxin Fang; Tianyu Zhang 007; Yuming Huang; Zhizhou Zhang; Kunal Masania; Charlie C. L. Wang (CoRR, 2023)

Function Based Sim-to-Real Learning for Shape Control of Deformable Free-form Surfaces. - Yingjun Tian; Guoxin Fang; Renbo Su; Weiming Wang 003; Simeon Gill; Andrew Weightman; Charlie C. L. Wang (Robotics: Science and Systems, 2024)

Motion-Driven Neural Optimizer for Prophylactic Braces Made by Distributed Microstructures. - Xingjian Han; Yu Jiang; Weiming Wang 003; Guoxin Fang; Simeon Gill; Zhiqiang Zhang 001; Shengfa Wang; Jun Saito; Deepak Kumar; Zhongxuan Luo; Emily Whiting; Charlie C. L. Wang (SIGGRAPH Asia, 2024)

Physics-aware iterative learning and prediction of saliency map for bimanual grasp planning. - Shiyao Wang; Xiuping Liu; Charlie C. L. Wang; Jian Liu (Comput. Aided Geom. Des., 2024)

Deep Reinforcement Learning Based Toolpath Generation for Thermal Uniformity in Laser Powder Bed Fusion Process. - Mian Qin; Junhao Ding; Shuo Qu; Xu Song; Charlie C. L. Wang; Wei-Hsin Liao (CoRR, 2024)

Motion-Driven Neural Optimizer for Prophylactic Braces Made by Distributed Microstructures. - Xingjian Han; Yu Jiang; Weiming Wang 003; Guoxin Fang; Simeon Gill; Zhiqiang Zhang; Shengfa Wang; Jun Saito; Deepak Kumar; Zhongxuan Luo; Emily Whiting; Charlie C. L. Wang (CoRR, 2024)

Concurrent and Scalable Trajectory Optimization for Manufacturing with Redundant Robots. - Yongxue Chen; Tianyu Zhang 007; Yuming Huang; Tao Liu 059; Charlie C. L. Wang (CoRR, 2024)

Toolpath Generation for High Density Spatial Fiber Printing Guided by Principal Stresses. - Tianyu Zhang 007; Tao Liu 059; Neelotpal Dutta; Yongxue Chen; Renbo Su; Zhizhou Zhang; Weiming Wang 003; Charlie C. L. Wang (CoRR, 2024)

Computer-controlled 3D freeform surface weaving. - Xiangjia Chen; Lip M. Lai; Zishun Liu; Chengkai Dai; Isaac C. W. Leung; Charlie C. L. Wang; Yeung Yam (Robotics Comput. Integr. Manuf., 2024)

Vector Field-Based Volume Peeling for Multi-Axis Machining. - Neelotpal Dutta; Tianyu Zhang 007; Guoxin Fang; Ismail E. Yigit; Charlie C. L. Wang (J. Comput. Inf. Sci. Eng., 2024)

Neural Slicer for Multi-Axis 3D Printing. - Tao Liu 059; Tianyu Zhang 007; Yongxue Chen; Yuming Huang; Charlie C. L. Wang (ACM Trans. Graph., 2024)

Learning Based Toolpath Planner on Diverse Graphs for 3D Printing. - Yuming Huang; Yuhu Guo; Renbo Su; Xingjian Han; Junhao Ding; Tianyu Zhang 007; Tao Liu 059; Weiming Wang 003; Guoxin Fang; Xu Song; Emily Whiting; Charlie Wang 001 (ACM Trans. Graph., 2024)

Flexpal (Flexible Pneumatic Actuated Linkage): The Future of Assistive Robotics to Improve Quality of Life. - Yinan Meng; Lutong Li; Helen Dawes; Andrew Weightman; Charlie C. L. Wang (ICORR, 2025)

IGA-Graph-Net: Isogeometric analysis-reuse method based on graph neural networks for topology-consistent models. - Gang Xu 001; Jin Xie; Weizhen Zhong; Masahiro Toyoura; Ran Ling; Jinlan Xu; Renshu Gu; Charlie C. L. Wang; Timon Rabczuk (J. Comput. Phys., 2025)

Co-Optimization of Tool Orientations, Kinematic Redundancy, and Waypoint Timing for Robot-Assisted Manufacturing. - Yongxue Chen; Tianyu Zhang 007; Yuming Huang; Tao Liu 059; Charlie C. L. Wang (IEEE Trans Autom. Sci. Eng., 2025)

Sensor-Space Based Robust Kinematic Control of Redundant Soft Manipulator by Learning. - Yinan Meng; Kun Qian 019; Jiong Yang; Renbo Su; Zhenhong Li 002; Charlie C. L. Wang (CoRR, 2025)

Neural Co-Optimization of Structural Topology, Manufacturable Layers, and Path Orientations for Fiber-Reinforced Composites. - Tao Liu 059; Tianyu Zhang 007; Yongxue Chen; Weiming Wang 003; Yu Jiang; Yuming Huang; Charlie C. L. Wang (ACM Trans. Graph., 2025)