De-Jiu Chen

Orcid: 0000-0001-7048-0108

According to our database1, De-Jiu Chen authored at least 57 papers between 2001 and 2024.

Collaborative distances:
  • Dijkstra number2 of four.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

Online presence:

On csauthors.net:

Bibliography

2024
Developing a Mechatronics-Twin Framework for Effective Exploration of Operational Behaviors of Prosthetic Sockets.
SN Comput. Sci., January, 2024

2023
Using a VAE-SOM architecture for anomaly detection of flexible sensors in limb prosthesis.
J. Ind. Inf. Integr., October, 2023

Combining Self-Organizing Map with Reinforcement Learning for Multivariate Time Series Anomaly Detection.
Proceedings of the IEEE International Conference on Systems, Man, and Cybernetics, 2023

A Simulation-Aided Approach to Safety Analysis of Learning-Enabled Components in Automated Driving Systems.
Proceedings of the 25th IEEE International Conference on Intelligent Transportation Systems, 2023

2022
Model-Based Systems Engineering Tool-Chain for Automated Parameter Value Selection.
IEEE Trans. Syst. Man Cybern. Syst., 2022

Integrated Control of Steering and Braking for Effective Collision Avoidance with Autonomous Emergency Braking in Automated Driving.
Proceedings of the 30th Mediterranean Conference on Control and Automation, 2022

Online Image Sensor Fault Detection for Autonomous Vehicles.
Proceedings of the 15th IEEE International Symposium on Embedded Multicore/Many-core Systems-on-Chip, 2022

A Mechatronics-twin Framework based on Stewart Platform for Effective Exploration of Operational Behaviors of Prosthetic Sockets with Amputees.
Proceedings of the 15th International Joint Conference on Biomedical Engineering Systems and Technologies, 2022

Wearable pressure sensing for lower limb amputees.
Proceedings of the IEEE Biomedical Circuits and Systems Conference, 2022

2021
A Sensor-Based Decision Support System for Transfemoral Socket Rectification.
Sensors, 2021

2020
Probabilistic Inference of Fault Condition of Cyber-Physical Systems Under Uncertainty.
IEEE Syst. J., 2020

Uncertainty Management in Situation Awareness for Cyber-Physical Systems: State of the Art and Challenge.
Proceedings of the ICCAI '20: 2020 6th International Conference on Computing and Artificial Intelligence, 2020

2019
An Adaptive Resource Provisioning Scheme for Industrial SDN Networks.
Proceedings of the 17th IEEE International Conference on Industrial Informatics, 2019

2018
A Service-Oriented Tool-Chain for Model-Based Systems Engineering of Aero-Engines.
IEEE Access, 2018

Empirical-Evolution of Frameworks Supporting Co-simulation Tool-Chain Development.
Proceedings of the Trends and Advances in Information Systems and Technologies, 2018

Towards A Service-oriented Framework for MBSE Tool-chain Development.
Proceedings of the 13th Annual Conference on System of Systems Engineering, 2018

Design of a Knowledge-Base Strategy for Capability-Aware Treatment of Uncertainties of Automated Driving Systems.
Proceedings of the Computer Safety, Reliability, and Security, 2018

Architecting Safety Supervisors for High Levels of Automated Driving.
Proceedings of the 21st International Conference on Intelligent Transportation Systems, 2018

Towards QoS-Aware Service-Oriented Communication in E/E Automotive Architectures.
Proceedings of the IECON 2018, 2018

Signal Feature Analysis for Dynamic Anomaly Detection of Components in Embedded Control Systems.
Proceedings of the Contemporary Complex Systems and Their Dependability, 2018

2017
Architecture exploration for distributed embedded systems: a gap analysis in automotive domain.
Proceedings of the 12th IEEE International Symposium on Industrial Embedded Systems, 2017

A Tool Integration Language to Formalize Co-simulation Tool-Chains for Cyber-Physical System (CPS).
Proceedings of the Software Engineering and Formal Methods, 2017

A Strategy for Assessing Safe Use of Sensors in Autonomous Road Vehicles.
Proceedings of the Computer Safety, Reliability, and Security, 2017

A Model-Based Approach to Dynamic Self-assessment for Automated Performance and Safety Awareness of Cyber-Physical Systems.
Proceedings of the Model-Based Safety and Assessment - 5th International Symposium, 2017

A Methodological Framework for Model-Based Self-management of Services and Components in Dependable Cyber-Physical Systems.
Proceedings of the Advances in Dependability Engineering of Complex Systems, 2017

2016
EAST-ADL: An Architecture Description Language for Automotive Software-intensive Systems in the Light of Recent use and Research.
Int. J. Syst. Dyn. Appl., 2016

Formulating customized specifications for resource allocation problem of distributed embedded systems.
Proceedings of the 35th International Conference on Computer-Aided Design, 2016

A model-based approach to qualified process automation for anomaly detection and treatment.
Proceedings of the 21st IEEE International Conference on Emerging Technologies and Factory Automation, 2016

2015
Model-Based Analysis and Engineering of Automotive Architectures with EAST-ADL: Revisited.
Int. J. Concept. Struct. Smart Appl., 2015

Design-Space Reduction for Architectural Optimization of Automotive Embedded Systems.
Proceedings of the 17th IEEE International Conference on High Performance Computing and Communications, 2015

Towards an Ontology-Based Approach to Safety Management in Cooperative Intelligent Transportation Systems.
Proceedings of the Theory and Engineering of Complex Systems and Dependability - Proceedings of the Tenth International Conference on Dependability and Complex Systems DepCoS-RELCOMEX, June 29, 2015

2014
Experience on applying software architecture recovery to automotive embedded systems.
Proceedings of the 2014 Software Evolution Week, 2014

On Integrating EAST-ADL and UPPAAL for Embedded System Architecture Verification.
Proceedings of the Embedded Systems Development, From Functional Models to Implementations, 2014

2013
Automatic optimisation of system architectures using EAST-ADL.
J. Syst. Softw., 2013

A reference architecture for cooperative driving.
J. Syst. Archit., 2013

An architectural approach to the analysis, verification and validation of software intensive embedded systems.
Computing, 2013

Automatic Optimisation of System Architectures using EAST-ADL.
Proceedings of the SAFECOMP 2013, 2013

2012
A Timed Automata-Based Method to Analyze EAST-ADL Timing Constraint Specifications.
Proceedings of the Modelling Foundations and Applications - 8th European Conference, 2012

2011
Integrated safety and architecture modeling for automotive embedded systems<sup>*</sup>.
Elektrotech. Informationstechnik, 2011

From EAST-ADL to AUTOSAR Software Architecture: A Mapping Scheme.
Proceedings of the Software Architecture - 5th European Conference, 2011

2010
Model-Based Safety Engineering of Interdependent Functions in Automotive Vehicles Using EAST-ADL2.
Proceedings of the Computer Safety, 2010

Integrating safety analysis into the model-based development toolchain of automotive embedded systems.
Proceedings of the ACM SIGPLAN/SIGBED 2010 conference on Languages, 2010

Automatic allocation of safety integrity levels.
Proceedings of the 1st Workshop on Critical Automotive Applications: Robustness & Safety, 2010

Autonomic Middleware for Automotive Embedded Systems.
Proceedings of the Autonomic Communication, 2010

2009
Context-Aware Adaptation in DySCAS.
Electron. Commun. Eur. Assoc. Softw. Sci. Technol., 2009

2008
Modelling Support for Design of Safety-Critical Automotive Embedded Systems.
Proceedings of the Computer Safety, 2008

Self configuration of dependent tasks for dynamically reconfigurable automotive embedded systems.
Proceedings of the 47th IEEE Conference on Decision and Control, 2008

2007
Towards a Dynamically Reconfigurable Automotive Control System Architecture.
Proceedings of the Embedded System Design: Topics, Techniques and Trends, IFIP TC10 Working Conference: International Embedded Systems Symposium (IESS), May 30, 2007

Managing Complexity of Automotive Electronics Using the EAST-ADL.
Proceedings of the 12th International Conference on Engineering of Complex Computer Systems (ICECCS 2007), 2007

Developing Dependable Automotive Embedded Systems using the EAST-ADL; representing continuous time systems in SysML.
Proceedings of the 1st International Workshop on Equation-Based Object-Oriented Languages and Tools, 2007

Towards Model-Based Engineering of Self-configuring Embedded Systems.
Proceedings of the Model-Based Engineering of Embedded Real-Time Systems, 2007

2006
Towards Improving Dependability of Automotive Systems by Using the EAST-ADL Architecture Description Language.
Proceedings of the Architecting Dependable Systems IV [the book is a result of DSN 2006 workshops, 2006

2005
Component-based vs. Model-based Development: A Comparison in the Context of Vehicular Embedded Systems.
Proceedings of the 31st EUROMICRO Conference on Software Engineering and Advanced Applications (EUROMICRO-SEAA 2005), 30 August, 2005

2004
Systems Modeling and Modularity Assessment for Embedded Computer Control Applications.
PhD thesis, 2004

A Systematic Approach for Identifying Operational Relationships in Embedded Computer Control Systems.
Proceedings of the 30th EUROMICRO Conference 2004, 31 August, 2004

A metrics system for quantifying operational coupling in embedded computer control systems.
Proceedings of the EMSOFT 2004, 2004

2001
Towards A Framework for Architecting Mechatronics Software Systems.
Proceedings of the 7th International Conference on Engineering of Complex Computer Systems (ICECCS 2001), 2001


  Loading...