Application-fields of flexible automated assembly systems. - Eberhard Abele; Rudolf Bäßler; Ernst Michael Wolf (Robotics, 1985)

Tool length influence on wear behaviour of twisted carbide drills. - Eberhard Abele; Andreas Ellermeier; Julien Hohenstein; Matthias Tschannerl (Prod. Eng., 2007)

Dynamic behaviour of protective covers in machine tools. - Eberhard Abele; Madhu Munirathnam; Michael Roth (Prod. Eng., 2007)

Digitally controlled output filters for improvement of temperature behavior of machine tool main spindle drives. - Eberhard Abele; Stefan Rothenbücher; Andreas Schiffler (Prod. Eng., 2007)

System identification during milling via active magnetic bearing. - Eberhard Abele; Andreas Schiffler; Stefan Rothenbücher (Prod. Eng., 2007)

Mechanical module interfaces for reconfigurable machine tools. - Eberhard Abele; Arno Wörn; Jürgen Fleischer; Jan Wieser; Patrick Martin 002; Robert Klöpper (Prod. Eng., 2007)

Development and design of an active work piece holder driven by piezo actuators. - Eberhard Abele; Holger Hanselka; Frerk Haase; Daniel Schlote; Andreas Schiffler (Prod. Eng., 2008)

Cartesian compliance model for industrial robots using virtual joints. - Eberhard Abele; Stefan Rothenbücher; Matthias Weigold (Prod. Eng., 2008)

Using PCD for machining CGI with a CO2 coolant system. - Eberhard Abele; Burkhard Schramm (Prod. Eng., 2008)

Analysis of cutting force during milling with regards to the dependency on the penetration angle. - Eberhard Abele; Sören Dietz; Andreas Schiffler (Prod. Eng., 2009)

Steps towards a protection system for machine tool main spindles against crash-caused damages. - Eberhard Abele; Christian Brecher; Stephan Cornelius Gsell; Alexander Hassis; Dennis Korff (Prod. Eng., 2012)

Tool path adaption based on optical measurement data for milling with industrial robots. - Eberhard Abele; Klaus Schützer; J. Bauer; M. Pischan (Prod. Eng., 2012)

Method for chatter detection with standard PLC systems. - Eberhard Abele; T. Sielaff; Andreas Schiffler (Prod. Eng., 2012)

Estimation of the rotational speed limit of milling cutters with screwed indexable inserts. - Eberhard Abele; Jia Tian (Prod. Eng., 2014)

Learning factory design: a competency-oriented approach integrating three design levels. - M. Tisch; C. Hertle; Eberhard Abele; Joachim Metternich; Ralf Tenberg (Int. J. Comput. Integr. Manuf., 2016)

Simulation and development of an active damper with robust μ-control for a machine tool with a gantry portal. - Eberhard Abele; Guido Pfeiffer; Behzad Jalizi; Andreas Bretz (Prod. Eng., 2016)

Modeling of process forces with respect to technology parameters and tool wear in milling Ti6Al4V. - Eberhard Abele; Christian Hasenfratz; Markus Bücker (Prod. Eng., 2017)

Modeling of process forces with consideration of tool wear for machining of sintered steel alloy for application to valve seat in a combustion engine. - Christian Bölling; Milla Kuhne; Eberhard Abele (Prod. Eng., 2017)

Realistic modeling of a combined heat and power plant in the context of mixed integer linear programming. - Thomas Weber; Nina Strobel; Thomas Kohne; Jakob Wolber; Eberhard Abele (Energy Inform., 2018)

Flexible IT platform for synchronizing energy demands with volatile markets. - Paul Schott; Raphael Ahrens; Dennis Bauer; Fabian Hering; Robert Keller; Jaroslav Pullmann; Daniel Schel; Jens Schimmelpfennig; Peter Simon; Thomas Weber; Eberhard Abele; Thomas Bauernhansl; et al. (it Inf. Technol., 2018)

Numerical investigation of chatter suppression via parametric anti-resonance in a motorized spindle unit during milling. - Eberhard Abele; Fadi Dohnal; M. Feulner; T. Sielaff; C. Daume (Prod. Eng., 2018)

Deburring of cross-drilled holes with ball-end cutters - modeling the tool path. - Eberhard Abele; Klaus Schützer; S. Güth; A. Meinhard (Prod. Eng., 2018)

Disruptive Force Sensor Based on Laser-based Powder-Bed-Fusion. - Romol Chadda; Johanna Probst; Claas Hartmann; Martin Link; Markus Hessinger; Eberhard Abele; Matthias Weigold; Mario Kupnik (IEEE SENSORS, 2020)