A CMOS field-programmable analog array. - Edward K. F. Lee; P. Glenn Gulak (IEEE J. Solid State Circuits, 1991)

Dynamic Current-Mode Multi-Valued MOS Memory with Error Correction. - Edward K. F. Lee; P. Glenn Gulak (ISMVL, 1992)

Reconfigurable data converter as a building block for mixed-signal test. - Edward K. F. Lee (ED&TC, 1997)

A digital technique for reducing clock jitter effects in time-interleaved A/D converter. - Huawen Jin; Edward K. F. Lee (ISCAS (2), 1999)

A 1 V front-end interface for switched-op amp circuits. - S. Karthikeyan; A. Tammineedi; C. Boecker; Edward K. F. Lee (ISCAS (2), 1999)

An asynchronous data recovery/retransmission technique with foreground DLL calibration. - S. Nagavarapu; J. Yan; Edward K. F. Lee; Randall L. Geiger (ISCAS (6), 1999)

A new multipath amplifier design technique for enhancing gain without sacrificing bandwidth. - Mark Schlarmann; Edward K. F. Lee; Randall L. Geiger (ISCAS (2), 1999)

Design of low-power ROM-less direct digital frequency synthesizer using nonlinear digital-to-analog converter. - Siamak Mortezapour; Edward K. F. Lee (IEEE J. Solid State Circuits, 1999)

A 1.2 V bandgap reference based on transimpedance amplifier. - Yueming Jiang; Edward K. F. Lee (ISCAS, 2000)

Design of 1 V switched-current cells in standard CMOS process. - Saroj Rout; Edward K. F. Lee (ISCAS, 2000)

A 1-V, 8-bit successive approximation ADC in standard CMOS process. - Siamak Mortezapour; Edward K. F. Lee (IEEE J. Solid State Circuits, 2000)

A ROM-less direct digital frequency synthesizer using segmented nonlinear digital-to-analog converter. - Jiandong Jiang; Edward K. F. Lee (CICC, 2001)

Design of a 1 V 250 MHz current-mode filter in conventional CMOS process. - Yuanying Deng; Edward K. F. Lee (ISCAS (1), 2001)

Segmented sine wave digital-to-analog converters for frequency synthesizer. - Jiandong Jiang; Edward K. F. Lee (ISCAS (1), 2001)

A reconfigurable pipelined data converter. - Siamak Mortezapour; Edward K. F. Lee (ISCAS (4), 2001)

Design of low-voltage CMOS continuous-time filter with on-chip automatic tuning. - Huanzhang Huang; Edward K. F. Lee (IEEE J. Solid State Circuits, 2001)

A low-power segmented nonlinear DAC-based direct digital frequency synthesizer. - Jiandong Jiang; Edward K. F. Lee (IEEE J. Solid State Circuits, 2002)

A low voltage low 1/f noise CMOS bandgap reference. - Yueming Jiang; Edward K. F. Lee (ISCAS (4), 2005)

A 1V 420μW 32-channel Cortical Signal Interface. - Edward K. F. Lee; Eusebiu Matei; Anthony Lam; Taihu Li (CICC, 2006)

A Matching Technique for Biphasic Stimulation Pulse. - Edward K. F. Lee; Anthony Lam (ISCAS, 2007)

A 0.65V rail-to-rail constant gm opamp for biomedical applications. - Edward K. F. Lee; Anthony Lam; Taihu Li (ISCAS, 2008)

High-voltage tolerant stimulation monitoring circuit in conventional CMOS process. - Edward K. F. Lee (CICC, 2009)

A 3 - 14V rail-to-rail constant gm opamp in conventional 0.18µm CMOS process. - Edward K. F. Lee (CICC, 2009)

A Low Voltage CMOS Bandgap Reference without using an Opamp. - Edward K. F. Lee (ISCAS, 2009)

High-voltage rectifier and voltage doubler in conventional 0.18μm CMOS process. - Edward K. F. Lee (ISCAS, 2010)

Low voltage CMOS bandgap references with temperature compensated reference current output. - Edward K. F. Lee (ISCAS, 2010)

A capacitor-based AC-DC step-up converter for biomedical implants. - Edward K. F. Lee (CICC, 2011)

An Inside Body Power and Bidirectional Data Transfer IC Module Pair. - Edward K. F. Lee (IEEE J. Solid State Circuits, 2011)

A feedback controlled coil driver for transcutaneous power transmission. - Edward K. F. Lee (CICC, 2012)

A sub-0.5V, 1.5µW rail-to-rail constant gm opamp and its filter application. - Edward K. F. Lee (ISCAS, 2012)

A 36V biphasic stimulator with electrode monitoring circuit. - Edward K. F. Lee; Rongching Dai; Natasha Reeves; Xiao Yun (ISCAS, 2012)

An active rectifier/regulator combo circuit for powering biomedical implants. - Edward K. F. Lee (CICC, 2013)

A low voltage low output impedance CMOS bandgap voltage reference. - Edward K. F. Lee (ISCAS, 2013)

A multiple-output fixed current stimulation ASIC for peripherally-implantable neurostimulation system. - Edward K. F. Lee; Eusebiu Matei; Van Gang; Jess Shi; Ali Zadeh (CICC, 2014)

A low voltage auto-reconfigured power-on-reset/bandgap reference circuit. - Edward K. F. Lee (ISCAS, 2014)

An integrated coil driver with discrete control and power efficient ASK modulation for transcutaneous power transmission. - Edward K. F. Lee (ISCAS, 2014)

A voltage doubling passive rectifier/regulator circuit for biomedical implants. - Edward K. F. Lee (CICC, 2015)

A low voltage CMOS differential/floating bandgap voltage reference circuit. - Edward K. F. Lee (ISCAS, 2015)

A 45V 10-b electrode monitoring analog-to-digital converter. - Edward K. F. Lee (ISCAS, 2015)

A Discrete Controlled Fully Integrated Class E Coil Driver With Power Efficient ASK Modulation for Powering Biomedical Implants. - Edward K. F. Lee (IEEE Trans. Circuits Syst. I Regul. Pap., 2015)

Passive rectifier/regulator combo circuits with embedded bandgap voltage reference. - Edward K. F. Lee (ISCAS, 2016)

A ±5V, ±10V, ±15V, 4-channel class-G biphasic constant-current stimulator. - Edward K. F. Lee (CICC, 2017)

A rectifier/AC shunt regulator combo circuit with inherent AM demodulation front-end for wireless powered implants. - Edward K. F. Lee (ISCAS, 2017)

A Power Efficient LDO-Type Wireless Battery Charger for Biomedical Implants Based on Direct Charging from Regulated Rectifier Current. - Edward K. F. Lee (ISCAS, 2018)