Chaotic behavior of 741 opamps subjected to EMI conveyed to power supply rails. - Zsolt Miklós Kovács-Vajna; Emilio Sardini; Nicolò Speciale (ISCAS, 2000)

Robust estimation of magnetic Barkhausen noise based on a numerical approach. - Alessandra Flammini; Daniele Marioli; Emilio Sardini; Andrea Taroni (IEEE Trans. Instrum. Meas., 2002)

Contactless Transmission of Measurement Information Between Sensor and Conditioning Electronics. - Daniele Marioli; Emilio Sardini; Mauro Serpelloni; Andrea Taroni (IEEE Trans. Instrum. Meas., 2008)

Passive and Self-Powered Autonomous Sensors for Remote Measurements. - Emilio Sardini; Mauro Serpelloni (Sensors, 2009)

Autonomous Sensor System With Power Harvesting for Telemetric Temperature Measurements of Pipes. - Simone Dalola; Vittorio Ferrari; Michele Guizzetti; Daniele Marioli; Emilio Sardini; Mauro Serpelloni; Andrea Taroni (IEEE Trans. Instrum. Meas., 2009)

Passive Hybrid MEMS for High-Temperature Telemetric Measurements. - Daniele Marioli; Emilio Sardini; Mauro Serpelloni (IEEE Trans. Instrum. Meas., 2010)

Human Knee Prosthesis Equipped with Force Sensors. - M. Gazzoli; Emilio Sardini; Mauro Serpelloni; G. Donzella (BIODEVICES, 2011)

Analysis of Electrical Generator for Power Harvesting from Human Movements. - Vincenzo Luciano; Emilio Sardini; Mauro Serpelloni; Gabriele Baronio (BIODEVICES, 2011)

Self-Powered Wireless Sensor for Air Temperature and Velocity Measurements With Energy Harvesting Capability. - Emilio Sardini; Mauro Serpelloni (IEEE Trans. Instrum. Meas., 2011)

Wireless Measurement Electronics for Passive Temperature Sensor. - Emilio Sardini; Mauro Serpelloni (IEEE Trans. Instrum. Meas., 2012)

Sensorized Glove for Measuring Hand Finger Flexion for Rehabilitation Purposes. - Michela Borghetti; Emilio Sardini; Mauro Serpelloni (IEEE Trans. Instrum. Meas., 2013)

Preliminary study of resistive sensors in inkjet technology for force measurements in biomedical applications. - Michela Borghetti; Emilio Sardini; Mauro Serpelloni (SSD, 2014)

Biocompatible inkjet resistive sensors for biomedical applications. - Alessandro Dionisi; Michela Borghetti; Emilio Sardini; Mauro Serpelloni (I2MTC, 2014)

Evaluation of bend sensors for limb motion monitoring. - Michela Borghetti; Emilio Sardini; Mauro Serpelloni (MeMeA, 2014)

Instrumented shirt to evaluate classical human movements. - Alessandro Dionisi; Emilio Sardini; Mauro Serpelloni; Viviane Pasqui (MeMeA, 2014)

Analysis of tongue pressure sensor for biomedical applications. - Emilio Sardini; Mauro Serpelloni; Stefano Pandini (MeMeA, 2014)

Daylong sitting posture measurement with a new wearable system for at home body movement monitoring. - Emilio Sardini; Mauro Serpelloni; Viviane Pasqui (I2MTC, 2015)

Low power wearable system for vital signs measurement in all day long applications. - Alessandro Dionisi; Daniele Marioli; Emilio Sardini; Mauro Serpelloni (MeMeA, 2015)

Power harvesting integrated in a knee implant for autonomous sensors implanted in human body. - Daniele Marioli; Emilio Sardini; Mauro Serpelloni (MeMeA, 2015)

Wireless Instrumented Crutches for Force and Movement Measurements for Gait Monitoring. - Emilio Sardini; Mauro Serpelloni; Matteo Lancini (IEEE Trans. Instrum. Meas., 2015)

Wireless Wearable T-Shirt for Posture Monitoring During Rehabilitation Exercises. - Emilio Sardini; Mauro Serpelloni; Viviane Pasqui (IEEE Trans. Instrum. Meas., 2015)

Low-power wireless system for temperature and humidity monitoring in artificial ventilation. - Andrea Bodini; Mauro Serpelloni; Emilio Sardini; Nicola Latronico; M. R. Tommasi; Matteo Filippini (MeMeA, 2016)

Study on a telemetrie system that works with an inkjet-printed resistive strain gauge. - Michele Bona; Emilio Sardini; Mauro Serpelloni; Bruno Andò; Cristian O. Lombardo (SAS, 2016)

Study on Impedance Behavior of a Telemetric System Operating with an Inkjet-Printed Resistive Strain Gauge. - Michele Bona; Emilio Sardini; Mauro Serpelloni; Bruno Andò; Cristian O. Lombardo (Sensors, 2016)

Impedance Sensors Embedded in Culture Media for Early Detection of Bacteria Growth. - Michela Borghetti; Marco Demori; Marco Ferrari 002; Vittorio Ferrari; Emilio Sardini; Mauro Serpelloni (Sensors, 2016)

Preliminary Study of a Low-Cost Point-of-Care Testing System Using Screen-Printed Biosensors for Early Biomarkers Detection Related to Alzheimer Disease. - Sarah Tonello; Mauro Serpelloni; Nicola Francesco Lopomo; Giulia Abate; Daniela Letizia Uberti; Emilio Sardini (Sensors, 2016)

Electrical Characterization of PEDOT: PSS Strips Deposited by Inkjet Printing on Plastic Foil for Sensor Manufacturing. - Michela Borghetti; Matteo Ghittorelli; Emilio Sardini; Mauro Serpelloni; Fabrizio Torricelli (IEEE Trans. Instrum. Meas., 2016)

Autonomous Wearable System for Vital Signs Measurement With Energy-Harvesting Module. - Alessandro Dionisi; Daniele Marioli; Emilio Sardini; Mauro Serpelloni (IEEE Trans. Instrum. Meas., 2016)

Novel telemetric technique for passive resistive sensors based on impedance phase angle measurement at constant frequency. - Michele Bona; Michela Borghetti; Emilio Sardini; Mauro Serpelloni (I2MTC, 2017)

Optimized power harvesting module for an autonomous sensor system implanted in a total knee prosthesis. - Muhammad Ahmed Khan; Mauro Serpelloni; Emilio Sardini (I2MTC, 2017)

A concept sensor-based system to be integrated in an existing automated platform monitoring bacterial growth. - Michele Bona; Michela Borghetti; Paolo Bellitti; Mauro Serpelloni; Emilio Sardini (ICE/ITMC, 2017)

Wireless instrumented cane for walking monitoring in Parkinson patients. - Feriel Mekki; Michela Borghetti; Emilio Sardini; Mauro Serpelloni (MeMeA, 2017)

Hand Robotic Rehabilitation: From Hospital to Home. - Alberto Borboni; Mauro Serpelloni; Michela Borghetti; Cinzia Amici; Francesco Aggogeri; Davide Fausti; Massimo Antonini; Maurizio Mor; Emilio Sardini; Rodolfo Faglia (RAAD, 2017)

Flexible monitoring system for automated detection of bacterial growth in a commercial specimen processing platform. - Paolo Bellitti; Michele Bona; Michela Borghetti; Emilio Sardini; Mauro Serpelloni (RTSI, 2017)

Telemetric Technique for Wireless Strain Measurement From an Inkjet-Printed Resistive Sensor. - Michele Bona; Mauro Serpelloni; Emilio Sardini; Cristian O. Lombardo; Bruno Andò (IEEE Trans. Instrum. Meas., 2017)

Wireless Point-of-Care Platform With Screen-Printed Sensors for Biomarkers Detection. - Sarah Tonello; Giulia Abate; Michela Borghetti; Mariagrazia Marziano; Mauro Serpelloni; Daniela Letizia Uberti; Nicola Francesco Lopomo; Maurizio Memo; Emilio Sardini (IEEE Trans. Instrum. Meas., 2017)

Spectrophotometer measurements to characterize conformational state of the proteins: p53 analysis. - Saad Abdullah; Mauro Serpelloni; Sarah Tonello; Emilio Sardini; Giulia Abate; Daniela Letizia Uberti (MeMeA, 2018)

Study for the Integration of a Measuring System to an Automated Platform for Monitoring the Growth of Bacterial Cultures. - Michele Bona; Paolo Bellitti; Emilio Sardini; Mauro Serpelloni (MetroInd4.0&IoT, 2018)

Design and implementation of a microsensor platform for protein detection realized via 3-D printing. - Andrea Bodini; Edoardo Cantù; Mauro Serpelloni; Emilio Sardini; Sarah Tonello (SAS, 2018)

Design and fabrication of a flexible capacitive coplanar force sensor for biomedical applications. - Andrea Bodini; Stefano Pandini; Emilio Sardini; Mauro Serpelloni (SAS, 2018)

Study Toward the Integration of a System for Bacterial Growth Monitoring in an Automated Specimen Processing Platform. - Paolo Bellitti; Michele Bona; Stefania Fontana; Emilio Sardini; Mauro Serpelloni (Sensors, 2018)

Preliminary Study on Wearable System for Multiple Finger Tracking. - Paolo Bellitti; Michele Bona; Emilio Sardini; Mauro Serpelloni (Sensors, 2018)

Novel Coplanar Capacitive Force Sensor for Biomedical Applications: A Preliminary Study. - Andrea Bodini; Emilio Sardini; Mauro Serpelloni; Stefano Pandini (Sensors, 2018)

Aerosol Jet Printed Sensors for Protein Detection: A Preliminary Study. - Edoardo Cantù; Sarah Tonello; Mauro Serpelloni; Emilio Sardini (Sensors, 2018)

Characterization of Sensorized Porous 3D Gelatin/Chitosan Scaffolds Via Bio-impedance Spectroscopy. - Muhammad Ahmed Khan; Nicola Francesco Lopomo; Mauro Serpelloni; Emilio Sardini; Luciana Sartore (Sensors, 2018)

Aerosol Jet Printed 3D Electrochemical Sensors for Protein Detection. - Edoardo Cantù; Sarah Tonello; Giulia Abate; Daniela Letizia Uberti; Emilio Sardini; Mauro Serpelloni (Sensors, 2018)

Telemetric Technique for Passive Resistive Sensors Based on Impedance Real Part Measurement at Fixed Frequency. - Michele Bona; Michela Borghetti; Emilio Sardini; Mauro Serpelloni (IEEE Trans. Instrum. Meas., 2018)

Development of a Wirelessly-Powered Wearable System for Finger Tracking. - Paolo Bellitti; Emilio Sardini; Mauro Serpelloni; Alessio De Angelis; Marco Dionigi; Antonio Moschitta; Paolo Carbone (I2MTC, 2019)

Application of a Modular Wearable System to Track Workers' Fingers Movement in Industrial Environments. - Paolo Bellitti; Michele Bona; Michela Borghetti; Emilio Sardini; Mauro Serpelloni (MetroInd4.0&IoT, 2019)

Implantable autonomous device for wireless force measurement in total knee prosthesis. - Muhammad Ahmed Khan; Michela Borghetti; Mauro Serpelloni; Emilio Sardini (IEEE Instrum. Meas. Mag., 2019)

Potentiostats for Protein Biosensing: Design Considerations and Analysis on Measurement Characteristics. - Saad Abdullah; Sarah Tonello; Michela Borghetti; Emilio Sardini; Mauro Serpelloni (J. Sensors, 2019)

Printed Strain Gauge on 3D and Low-Melting Point Plastic Surface by Aerosol Jet Printing and Photonic Curing. - Michela Borghetti; Mauro Serpelloni; Emilio Sardini (Sensors, 2019)

Support-Material-Free Microfluidics on an Electrochemical Sensors Platform by Aerosol Jet Printing. - Nicolò Giuseppe Di Novo; Edoardo Cantù; Sarah Tonello; Emilio Sardini; Mauro Serpelloni (Sensors, 2019)

A Preliminary Study on Aerosol Jet-Printed Stretchable Dry Electrode for Electromyography. - Michela Borghetti; Tiziano Fapanni; Nicola Francesco Lopomo; Emilio Sardini; Mauro Serpelloni (ApplePies, 2020)

Preliminary Analysis on Cellulose-based Gas Sensor by Means of Aerosol Jet Printing and Photonic Sintering. - Edoardo Cantù; Matteo Soprani; Andrea Ponzoni; Emilio Sardini; Mauro Serpelloni (BIODEVICES, 2020)

Novel Wearable System for Surface EMG Using Compact Electronic Board and Printed Matrix of Electrodes. - Tiziano Fapanni; Nicola Francesco Lopomo; Emilio Sardini; Mauro Serpelloni (HealthyIoT, 2020)

Novel Piezoelectric Sensor by Aerosol Jet Printing in Industry 4.0. - Tiziano Fapanni; Michela Borghetti; Emilio Sardini; Mauro Serpelloni (MetroInd4.0&IoT, 2020)

Improved portable measuring device for real-time humidity and temperature monitoring in intensive care unit. - Sarah Tonello; Michela Borghetti; Emilio Sardini; Mauro Serpelloni (IEEE Instrum. Meas. Mag., 2020)

Printed Smart Devices on Cellulose-Based Materials by means of Aerosol-Jet Printing and Photonic Curing. - Mauro Serpelloni; Edoardo Cantù; Michela Borghetti; Emilio Sardini (Sensors, 2020)

A Wearable and Wirelessly Powered System for Multiple Finger Tracking. - Paolo Bellitti; Alessio De Angelis; Marco Dionigi; Emilio Sardini; Mauro Serpelloni; Antonio Moschitta; Paolo Carbone (IEEE Trans. Instrum. Meas., 2020)

PVDF Piezoelectric Sensors on 3D low-Melting Point Substrates: a Preliminary Study on Paper. - Michela Borghetti; Edoardo Cantù; Emilio Sardini; Mauro Serpelloni (I2MTC, 2021)

Preliminary Study of a Flexible Printed Multi-Sensing Platform for Electromyography and Lactate Measuring during Rehabilitation. - Sarah Tonello; Giada Giorgi; Claudio Narduzzi; Tiziano Fapanni; Edoardo Cantù; Mauro Serpelloni; Emilio Sardini; Sandro Carrara (MeMeA, 2021)

Preliminary Study on Wireless Passive Resistive Sensor Applied for Smart Objects. - Michela Borghetti; Edoardo Cantù; Emilio Sardini; Mauro Serpelloni (MetroInd4.0&IoT, 2021)

Preliminary Analysis on a Paper-based Ammonia Sensor for Future Food Smart Packaging. - Michela Borghetti; Edoardo Cantù; Emilio Sardini; Mauro Serpelloni; Andrea Ponzoni (MetroInd4.0&IoT, 2021)

Printed Sensors for Smart Objects in Industry 4.0. - Michela Borghetti; Edoardo Cantù; Emilio Sardini; Mauro Serpelloni (RTSI, 2021)

3D Electrochemical Sensor and Microstructuration Using Aerosol Jet Printing. - Tiziano Fapanni; Emilio Sardini; Mauro Serpelloni; Sarah Tonello (Sensors, 2021)

Preliminary study on printed microelectrode array by Aerosol Jet Printing technology. - Ileana Armando; Michela Borghetti; Emilio Sardini; Mauro Serpelloni (MetroInd4.0& IoT, 2022)

Uncertainty Sources in Aerosol Jet Printed and Flexible Electrochemical Sensors. - Tiziano Fapanni; Mauro Serpelloni; Emilio Sardini (MetroInd4.0& IoT, 2022)

Smart Brace for Static and Dynamic Knee Laxity Measurement. - Paolo Bellitti; Michela Borghetti; Nicola Francesco Lopomo; Emilio Sardini; Mauro Serpelloni (Sensors, 2022)

Resistive Sensors for Smart Objects: Analysis on Printing Techniques. - Paolo Bellitti; Michela Borghetti; Edoardo Cantù; Emilio Sardini; Mauro Serpelloni (IEEE Trans. Instrum. Meas., 2022)

Aerosol Jet Printed and Photonic Cured Paper-Based Ammonia Sensor for Food Smart Packaging. - Michela Borghetti; Edoardo Cantù; Andrea Ponzoni; Emilio Sardini; Mauro Serpelloni (IEEE Trans. Instrum. Meas., 2022)

Investigation on Readout Strategy for Aqueous NH3 Sensor Developed by Additive Technology. - Bruno Andò; Salvatore Baglio; Salvatore Castorina; Salvatore Graziani; Salvatore Petralia; Maria Anna Messina; Ludovica Maugeri; Emilio Sardini; Mauro Serpelloni; Paolo Bellitti; Giovanni Neri; Angelo Ferlazzo (MetroInd4.0&IoT, 2023)

Preliminary Results on Carbon-Based Thermistors Produced by Aerosol Jet Printing. - Tiziano Fapanni; Stefano Bellotti; Michela Borghetti; Emilio Sardini; Mauro Serpelloni (MetroInd4.0&IoT, 2023)

Preliminary Results on Fully-Printed and Silver-Based Temperature Sensors for Aerospace Industry. - Tiziano Fapanni; Emilio Sardini; Michela Borghetti; Mauro Serpelloni; Stefano Bellotti (MetroInd4.0&IoT, 2023)

Amperometric Measurements by a Novel Aerosol Jet Printed Flexible Sensor for Wearable Applications. - Sarah Tonello; Tiziano Fapanni; Stefano Bonaldo; Giada Giorgi; Claudio Narduzzi; Alessandro Paccagnella; Mauro Serpelloni; Emilio Sardini; Sandro Carrara (IEEE Trans. Instrum. Meas., 2023)

Overall Additive Manufacturing of Capacitive Sensors Integrated into Textiles: A Preliminary Analysis on Contact Pressure Estimation. - Tiziano Fapanni; Raphael Palucci Rosa; Edoardo Cantù; Federica Agazzi; Nicola Francesco Lopomo; Giuseppe Rosace; Emilio Sardini (BIOSTEC (1), 2024)

Asymmetric Self Heating of Fully Printed Strain Gauge in Wheatstone Bridge Configuration. - Tiziano Fapanni; Edoardo Cantù; Emilio Sardini (I2MTC, 2024)

Digital Thread for Smart Products: A Survey on Technologies, Challenges, and Opportunities in Service-Oriented Supply Chains. - Devis Bianchini; Tiziano Fapanni; Massimiliano Garda; Francesco Leotta; Massimo Mecella; Anisa Rula; Emilio Sardini (IEEE Access, 2024)

Optimization of Piezo-Driven Jet Valve Dispensing Process for the Geometrical Control of Printed Sensors Based on Silver and MXene Inks. - Michela Borghetti; Valeria Nicolosi; Emilio Sardini; Mauro Serpelloni; Dahnan Spurling (IEEE Trans. Instrum. Meas., 2024)

Sweat Quantification During Electrodermal Analysis Combining Paper-Based Microfluidics with Printable Electrodes: Design and Materials. - Batoul Hosseinzadeh; Sarah Tonello; Nicola Francesco Lopomo; Emilio Sardini (BIOSTEC (1), 2025)

Simple Electronic Frontend for Telemetric Sensors in a Smart Object Paradigm. - Tiziano Fapanni; Roberto Cannone; Emilio Sardini (I2MTC, 2025)

Printed Soft Capacitive Sensor for Fingertip Contact Monitoring. - Paolo Bellitti; Michela Borghetti; Emilio Sardini; Mauro Serpelloni (MetroInd4.0 & IoT, 2025)

Preliminary Study on Electrochemical Sensors for Ion Detection in Agriculture and Environment by Aerosol Jet Printing. - Giorgia Polidori; Soufiane Mahraoui; Emilio Sardini; Mauro Serpelloni (MetroInd4.0 & IoT, 2025)

Machine Learning Model Coupling PCA and PLSR for Predicting Moisture Content in Different Soil Textures Using Near-Infrared Spectroscopy. - Damiano Crescini; Emilio Sardini; Mauro Serpelloni; Giordano Piubeni (SAS, 2025)

Novel Method for Balancing Full Wheatstone Bridge for High-Tolerance Resistive Sensors. - Michela Borghetti; Oscar Casas; Emilio Sardini; Mauro Serpelloni (IEEE Trans. Instrum. Meas., 2025)