Intersection approach to multi-point machining of sculptured surfaces. - Andrew Warkentin; Fathy Ismail; Sanjeev Bedi (Comput. Aided Geom. Des., 1998)

Generation of swept volumes of toroidal endmills in five-axis motion using space curves. - David Roth; Sanjeev Bedi; Fathy Ismail (Symposium on Solid Modeling and Applications, 1999)

Multi-point tool positioning strategy for 5-axis mashining of sculptured surfaces. - Andrew Warkentin; Fathy Ismail; Sanjeev Bedi (Comput. Aided Geom. Des., 2000)

Surface swept by a toroidal cutter during 5-axis machining. - David Roth; Sanjeev Bedi; Fathy Ismail; Stephen Mann (Comput. Aided Des., 2001)

Cusp modeling for 5-axis surface machining. - Paul J. Gray; Fathy Ismail; Sanjeev Bedi (Symposium on Solid Modeling and Applications, 2003)

Rolling ball method for 5-axis surface machining. - Paul J. Gray; Sanjeev Bedi; Fathy Ismail (Comput. Aided Des., 2003)

Mechanistic modelling of the milling process using an adaptive depth buffer. - David Roth; Fathy Ismail; Sanjeev Bedi (Comput. Aided Des., 2003)

Graphics-assisted Rolling Ball Method for 5-axis surface machining. - Paul J. Gray; Fathy Ismail; Sanjeev Bedi (Comput. Aided Des., 2004)

A neuro-fuzzy approach to gear system monitoring. - Wilson Wang; Fathy Ismail; M. Farid Golnaraghi (IEEE Trans. Fuzzy Syst., 2004)

Arc-intersect method for 5-axis tool positioning. - Paul J. Gray; Sanjeev Bedi; Fathy Ismail (Comput. Aided Des., 2005)

Tool path planning for 3-axis machining. - Armando Roman; Sanjeev Bedi; Fathy Ismail (Int. J. Manuf. Res., 2006)

Mechanistic modelling of 5-axis milling using an adaptive and local depth buffer. - David Roth; Paul J. Gray; Fathy Ismail; Sanjeev Bedi (Comput. Aided Des., 2007)

Bearing Fault Diagnostics Based on Reconstructed Features. - Jie Liu 015; Shahab Ghafari; Wilson Wang; M. Farid Golnaraghi; Fathy Ismail (IAS, 2008)

An enhanced GA technique for system optimization. - Dezhi Li; Wilson Wang; Fathy Ismail (IECON, 2012)

Enhanced fuzzy-filtered neural networks for material fatigue prognosis. - Dezhi Li; Wilson Wang; Fathy Ismail (Appl. Soft Comput., 2013)

Modeling, Simulation, and Optimization of Machining Polymer Infiltrated Calcium Polyphosphate. - Theodoros Vasilopoulos; Kaan Erkorkmaz; Fathy Ismail; Robert M. Pilliar (Int. J. Autom. Technol., 2013)

Fuzzy Neural Network Technique for System State Forecasting. - Dezhi Li; Wilson Wang; Fathy Ismail (IEEE Trans. Cybern., 2013)

An evolving fuzzy neural predictor for multi-dimensional system state forecasting. - Dezhi Li; Wilson Wang; Fathy Ismail (Neurocomputing, 2014)

A Mutated Particle Filter Technique for System State Estimation and Battery Life Prediction. - Dezhi Li; Wilson Wang; Fathy Ismail (IEEE Trans. Instrum. Meas., 2014)

A selective boosting technique for pattern classification. - Dezhi Li; Wilson Wang; Fathy Ismail (Neurocomputing, 2015)

A fuzzy-filtered grey network technique for system state forecasting. - Dezhi Li; Wilson Wang; Fathy Ismail (Soft Comput., 2015)

An Enhanced Bispectrum Technique With Auxiliary Frequency Injection for Induction Motor Health Condition Monitoring. - Dezhi Li; Wilson Wang; Fathy Ismail (IEEE Trans. Instrum. Meas., 2015)

A regulated boosting technique for material fatigue property prognostics. - Dezhi Li; Wilson Wang; Fathy Ismail (Eng. Appl. Artif. Intell., 2017)