Neuro-fuzzy Approach for Electro-discharge Sinking Process Control. - Fritz Klocke; Ralf Raabe; Guenther Wiesner (Fuzzy Days, 1997)

Potentials and procedure for the integrated planning of production technologies in the early phases of product development. - Walter Eversheim; Fritz Klocke; Wolfgang Schmitz; Frank Brandenburg; N. Winands (Eur. J. Oper. Res., 1997)

Evaluating alternative production cycles using the extended fuzzy AHP method. - M. Weck; Fritz Klocke; H. Schell; E. Rüenauver (Eur. J. Oper. Res., 1997)

Comparative Visualization of FEM-Based Cutting Simulations in a Virtual Environment. - Fritz Klocke; Andreas M. Straube (IPT/EGVE, 2003)

Advanced grinding of titanium aluminides. - Fritz Klocke; Christoph Zeppenfeld; Zwi Nachmani (Int. J. Manuf. Technol. Manag., 2007)

Investigations on laser sintering of ceramic slurries. - Fritz Klocke; Christian Derichs; Christoph Ader; Axel Demmer (Prod. Eng., 2007)

Development of an incremental rolling process for the production of defined riblet surface structures. - Fritz Klocke; Björn Feldhaus; Sebastian Mader (Prod. Eng., 2007)

Electrochemical oxidation analysis for dressing bronze-bonded diamond grinding wheels. - Fritz Klocke; Andreas Klink; Udo Schneider (Prod. Eng., 2007)

Fundamental study of surface densification of PM gears by rolling using FE analysis. - Fritz Klocke; Tobias Schröder; Philipp Kauffmann (Prod. Eng., 2007)

Methodology to describe the influence of manufacturing processes on the part functionality. - Fritz Klocke; Holger Willms (Prod. Eng., 2007)

Intelligent Assembly for Aero Engine Components. - Fritz Klocke; Drazen Veselovac; Thomas Auerbach; Robert Seidner (ICIRA (2), 2008)

Modeling of contact behavior between polishing pad and workpiece surface. - Fritz Klocke; Olaf Dambon; Richard Zunke (Prod. Eng., 2008)

Mechanisms in the generation of grinding wheel topography by dressing. - Fritz Klocke; Barbara Linke (Prod. Eng., 2008)

Modelling and simulation of process: machine interaction in grinding. - Jan C. Aurich; Dirk Biermann; Heribert Blum; Christian Brecher; Carsten Carstensen; Berend Denkena; Fritz Klocke; Matthias Kröger; Paul Steinmann; Klaus Weinert (Prod. Eng., 2009)

Influence of process and geometry parameters on the surface layer state after roller burnishing of IN718. - Fritz Klocke; Vladimir Bäcker; Hagen Wegner; Björn Feldhaus; Hans-Uwe Baron; Roland Hessert (Prod. Eng., 2009)

Size effects of micro drilling in steel. - Fritz Klocke; K. Gerschwiler; Mustapha Abouridouane (Prod. Eng., 2009)

Tool life increase of coated carbide tools by micro blasting. - Fritz Klocke; Christof Gorgels; Emmanouil Bouzakis; Arne Stuckenberg (Prod. Eng., 2009)

Analysis of the influence of gear dimensions on cutting speed and contact conditions during the gear honing process. - Fritz Klocke; Christof Gorgels; Vasilios Vasiliou (Prod. Eng., 2009)

Material-related aspects of the machinability of Austempered Ductile Iron. - Fritz Klocke; M. Arft; Dieter Lung (Prod. Eng., 2010)

Development of a reliable grinding procedure for ceramic medical instruments. - Fritz Klocke; Barbara Linke; Dominik Schluetter (Prod. Eng., 2010)

Investigation of coated tools' cutting performance in milling Ti6Al4V and its correlation to the temperature dependent impact resistance of the film. - Fritz Klocke; Nikolaos Michailidis; K.-D. Bouzakis; M. Witty; Stefanos Gerardis; E. Lili; Maria Pappa (Prod. Eng., 2010)

Meta-modeling for Manufacturing Processes. - Thomas Auerbach; Marion Beckers; Guido Buchholz; Urs Eppelt; Yves-Simon Gloy; Peter Fritz; Toufik Al Khawli; Stephan Kratz; Juliane Lose; Thomas Molitor; Axel Reßmann; Ulrich Thombansen; et al. (ICIRA (2), 2011)

Analysis and Optimization of Bevel Gear Cutting Processes by Means of Manufacturing Simulation. - Christian Brecher; Fritz Klocke; Markus Brumm; Ario Hardjosuwito (SIMULTECH (Selected Papers), 2011)

Manufacturing Simulation of Bevel Gear Cutting - Simulation based Approach for Tool Wear Analysis. - Christian Brecher; Fritz Klocke; Christof Gorgels; Ario Hardjosuwito (SIMULTECH, 2011)

Residual Stress Model for Speed-Stroke Grinding of Hardened Steel with CBN Grinding Wheels. - Michael Duscha; Fritz Klocke; Hagen Wegner (Int. J. Autom. Technol., 2011)

Process Monitoring and Control of Machining Operations. - Fritz Klocke; Stephan Kratz; Thomas Auerbach; Sascha Gierlings; Guido Wirtz; Drazen Veselovac (Int. J. Autom. Technol., 2011)

A hybrid machining center for enabling new die manufacturing and repair concepts. - Christian Brecher; Fritz Klocke; Tobias Breitbach; Dennis Do-Khac; Daniel Heinen; Andreas Karlberger; Chris-Jörg Rosen (Prod. Eng., 2011)

Analysis of defect mechanisms in polishing of tool steels. - Fritz Klocke; Olaf Dambon; Barbara Behrens (Prod. Eng., 2011)

Process force analysis on sinking-EDM electrodes for the precision manufacturing. - Fritz Klocke; Miguel Garzón; Jens Dieckmann; Andreas Klink (Prod. Eng., 2011)

Prognosis of the local tool wear in gear finish hobbing. - Fritz Klocke; Christof Gorgels; Gerd-Thomas Weber; Rolf Schalaster (Prod. Eng., 2011)

Modeling economic efficiency of multi-technology platforms. - Fritz Klocke; Stefan Tönissen; Hagen Wegner; Andreas Roderburg (Prod. Eng., 2011)

Robot Assisted Manufacturing System for High Gloss Finishing of Steel Molds. - André Driemeyer Wilbert; Barbara Behrens; Olaf Dambon; Fritz Klocke (ICIRA (1), 2012)

A new experimental methodology to analyse the friction behaviour at the tool-chip interface in metal cutting. - Hendrik Puls; Fritz Klocke; Dieter Lung (Prod. Eng., 2012)

Modeling the characteristics of multi-technology platforms. - Stefan Tönissen; Fritz Klocke; Björn Feldhaus; Steffen Buchholz (Prod. Eng., 2012)

Residual stress prediction in quick point grinding. - Stefan Tönissen; Fritz Klocke; Björn Feldhaus; Steffen Buchholz; Markus Weiß (Prod. Eng., 2012)

Simulation based model for tool life prediction in bevel gear cutting. - Christian Brecher; Fritz Klocke; Markus Brumm; Ario Hardjosuwito (Prod. Eng., 2013)

Finishing of polycrystalline diamond tools by combining laser ablation with grinding. - Christian Brecher; Fritz Klocke; Florestan Schindler; Andreas Janssen; Bettina Fischer; Jan-Patrick Hermani (Prod. Eng., 2013)

Presentation of a novel cutting technology for precision machining of hardened, rotationally symmetric parts. - Fritz Klocke; Thomas Bergs; Florian Degen; Philipp Ganser (Prod. Eng., 2013)

Broaching of Inconel 718 with cemented carbide. - Fritz Klocke; P. Vogtel; Sascha Gierlings; Dieter Lung; Drazen Veselovac (Prod. Eng., 2013)

Decision-Making Process in Manufacturing Technology Planning for Small Scale Productions. - Fritz Klocke; Kristian Arntz; Dominik Heeschen (HICSS, 2014)

Comparison of rotational turning and hard turning regarding surface generation. - Florian Degen; Fritz Klocke; Thomas Bergs; Philipp Ganser (Prod. Eng., 2014)

Optimized density profiles for powder metallurgical gears. - E. Gräser; M. Hajeck; Alexander Bezold; Christoph Broeckmann; Markus Brumm; Fritz Klocke (Prod. Eng., 2014)

Technology chain optimization: a systematic approach considering the manufacturing history. - Fritz Klocke; Steffen Buchholz; Jens Stauder (Prod. Eng., 2014)

Analysis of friction between stainless steel sheets and machine hammer peened structured tool surfaces: experimental and numerical investigation of the lubricated interaction gap. - Fritz Klocke; Daniel Trauth; Fabian Schongen; A. Shirobokov (Prod. Eng., 2014)

Friction analysis of alternative tribosystems for a foil free forming of stainless steel using strip drawing test: analysis of physicochemical interactions between coatings and lubricants. - Fritz Klocke; Daniel Trauth; M. Terhorst; Patrick Mattfeld (Prod. Eng., 2014)

Laser path calculation method on triangulated mesh for repair process on turbine parts. - Yuan Liu 004; Thomas Bobek; Fritz Klocke (Comput. Aided Des., 2015)

Integrative technology chain design for small scale manufacturers. - Fritz Klocke; Kristian Arntz; Dominik Heeschen (Prod. Eng., 2015)

Reducing data loss within adaptive process chains in the context of commonly-used CAx systems. - Fritz Klocke; Gunter Spöcker; Tobias Huwer; Thomas Bobek; Kristian Arntz (Prod. Eng., 2015)

Influence of the dressing process on grinding wheel wear. - Fritz Klocke; Janis Thiermann; Patrick Mattfeld (Prod. Eng., 2015)

Gear finish hobbing: potentials of several cutting materials. - Deniz Sari; Fritz Klocke; Christoph Löpenhaus (Prod. Eng., 2015)

Finite-element-analysis of the relationship between chip geometry and stress triaxiality distribution in the chip breakage location of metal cutting operations. - S. Buchkremer; Fritz Klocke; Dieter Lung (Simul. Model. Pract. Theory, 2015)

Analysis of wear of fused silica moulding using glassy carbon moulds. - Fritz Klocke; Olaf Dambon; Gang Liu; Julia Dukwen (Prod. Eng., 2016)

Analysis of the fluid pressure, load capacity, and coefficient of friction of an elliptic machine hammer peened surface structure in hydrodynamic lubrication. - Daniel Trauth; J. Stanke; A. Shirobokov; Patrick Mattfeld; Fritz Klocke (Prod. Eng., 2016)

Editorial: Congratulatory Message. - Fritz Klocke (Int. J. Autom. Technol., 2017)

Robust technology chain design: considering undesired interactions within the technology chain. - Fritz Klocke; Patrick Mattfeld; Jens Stauder; Johannes Müller; Timm Grünebaum (Prod. Eng., 2017)

Model-based predictive force control in milling: determination of reference trajectory. - Max Schwenzer; Oliver Adams; Fritz Klocke; Sebastian Stemmler; Dirk Abel (Prod. Eng., 2017)

Influence of the cemented carbide specification on the process force and the process temperature in grinding. - Christian Wirtz; Sebastian Mueller; Daniel Trauth; Patrick Mattfeld; Fritz Klocke (Prod. Eng., 2017)

An advanced numerical approach on tool wear simulation for tool and process design in metal cutting. - Marvin Binder; Fritz Klocke; Benjamin Döbbeler (Simul. Model. Pract. Theory, 2017)

System Identification of a CNC Machining Center with Support Vector Machines. - Muzaffer Ay; Sebastian Stemmler; Dirk Abel; Max Schwenzer; Fritz Klocke (MED, 2018)

Mathematical modeling of ceramic bond bridges in grinding wheels. - Michael Rom; Karl-Heinz Brakhage; Sebastian Barth; Christian Wrobel; Patrick Mattfeld; Fritz Klocke (Math. Comput. Simul., 2018)

Influence of the coolant nozzle orientation and size on the tool temperature under high-pressure coolant supply using an analogy test bench. - Fritz Klocke; Benjamin Döbbeler; Thomas Lakner (Prod. Eng., 2018)

Influence of different grinding wheel and dressing roller specifications on grinding wheel wear. - Sebastian Prinz; Daniel Trauth; Patrick Mattfeld; Fritz Klocke (Prod. Eng., 2018)