A capacitive 4-turn angular-position sensor. - Georg Brasseur (IEEE Trans. Instrum. Meas., 1998)

A robust capacitive angular speed sensor. - Tibor Fabian; Georg Brasseur (IEEE Trans. Instrum. Meas., 1998)

A measurement algorithm for capacitive speed encoder with a modified front-end topology. - Tibor Fabian; Georg Brasseur (IEEE Trans. Instrum. Meas., 1998)

Virtual rotor grounding of capacitive angular position sensors. - Georg Brasseur; Paul L. Fulmek; Walter Smetana (IEEE Trans. Instrum. Meas., 2000)

Modeling of the front end of a new capacitive finger-type angular-position sensor. - Georg Brasseur (IEEE Trans. Instrum. Meas., 2001)

Capacitive sensor for relative angle measurement. - Paul L. Fulmek; Florian Wandling; Wolfgang Zdiarsky; Georg Brasseur; Stefan P. Cermak (IEEE Trans. Instrum. Meas., 2002)

State of the art of robust capacitive sensors. - Georg Brasseur; Bernhard Brandstätter; Hubert Zangl (ROSE, 2003)

Design rules for robust capacitive sensors. - Georg Brasseur (IEEE Trans. Instrum. Meas., 2003)

Modeling of high power automotive batteries by the use of an automated test system. - Bernhard Schweighofer; Klaus M. Raab; Georg Brasseur (IEEE Trans. Instrum. Meas., 2003)

Random-data correlator architecture for flow velocity measurement applications. - Anton Fuchs; Hubert Zangl; Georg Brasseur; Emil M. Petriu (ROSE, 2004)

Capacitive sensor for active tip clearance control in a palm-sized gas turbine generator. - Tibor Fabian; Fritz B. Prinz; Georg Brasseur (IEEE Trans. Instrum. Meas., 2005)

Simulation and robustness analysis for a novel capacitive/magnetic full-turn absolute angular position sensor. - Hubert Zangl; Bernhard Brandstätter; Stefan P. Cermak; Georg Brasseur; Paul L. Fulmek (IEEE Trans. Instrum. Meas., 2005)

Flow-velocity measurement for bulk granular solids in pneumatic conveyor pipes using random-data correlator architecture. - Anton Fuchs; Hubert Zangl; Georg Brasseur; Emil M. Petriu (IEEE Trans. Instrum. Meas., 2006)

An autonomous sensor system for monitoring of high voltage overhead power supply lines. - Michael J. Moser; Hubert Zangl; Thomas Bretterklieber; Georg Brasseur (Elektrotech. Informationstechnik, 2009)

Condition monitoring of Lithium-Ion Batteries for electric and hybrid electric vehicles. - Mikael Sternad; Martin Cifrain; Daniel Watzenig; Georg Brasseur; Martin Winter (Elektrotech. Informationstechnik, 2009)

Seat Occupancy Detection Based on Capacitive Sensing. - Boby George; Hubert Zangl; Thomas Bretterklieber; Georg Brasseur (IEEE Trans. Instrum. Meas., 2009)

A Feasibility Study on Autonomous Online Condition Monitoring of High-Voltage Overhead Power Lines. - Hubert Zangl; Thomas Bretterklieber; Georg Brasseur (IEEE Trans. Instrum. Meas., 2009)

A Combined Inductive-Capacitive Proximity Sensor for Seat Occupancy Detection. - Boby George; Hubert Zangl; Thomas Bretterklieber; Georg Brasseur (IEEE Trans. Instrum. Meas., 2010)

Strong and Weak Electric Field Interfering: Capacitive Icing Detection and Capacitive Energy Harvesting on a 220-kV High-Voltage Overhead Power Line. - Michael J. Moser; Thomas Bretterklieber; Hubert Zangl; Georg Brasseur (IEEE Trans. Ind. Electron., 2011)

A System Model for Cooperative RFID Readpoints. - Michael Goller; Markus Brandner; Georg Brasseur (IEEE Trans. Instrum. Meas., 2014)

Signal-Bandwidth Evaluation for Power Measurements in Electric Automotive Drives. - David Lindenthaler; Georg Brasseur (IEEE Trans. Instrum. Meas., 2015)

Model based monitoring of ice accretion on overhead power lines. - Thomas Bretterklieber; Markus Neumayer; Matthias Flatscher; A. Becke; Georg Brasseur (I2MTC, 2016)

State of charge estimation of a LiFePO4 battery: A dual estimation approach incorporating open circuit voltage hysteresis. - Thomas Gallien; Georg Brasseur (I2MTC, 2016)

AC power measurements of electric drives: a method incorporating calorimetry and DC measurements only. - David Lindenthaler; Georg Brasseur (Elektrotech. Informationstechnik, 2017)

Ion current measurement for parameter estimation in small two stroke engines. - Gabriel Gruber; Bernhard Schweighofer; Georg Brasseur; Riccardo Basso (I2MTC, 2018)

Analysis of Autoregressive Coefficients of Knock Sensor Signals for Misfire Detection in Internal Combustion Engines. - Matthias Rath 002; Hannes Wegleiter; Georg Brasseur; Riccardo Basso (I2MTC, 2019)

Magnetic Energy Harvesting on Overhead High Voltage Lines: Weight Optimized Transformer Design for High Power Output. - Markus Neumayer; Thomas Bretterklieber; Gabriel Gruber; Georg Brasseur (I2MTC, 2020)

Feasibility Evaluation of Optoelectronic Strain Measurement for Flywheel Rotors. - Matthias Rath 002; Rupert Preßmair; Bernhard Schweighofer; Georg Brasseur (I2MTC, 2020)