Perturbation Analysis for the Design of Flexible Manufacturing System Flow Controllers. - Michael Caramanis; George Liberopoulos (Oper. Res., 1992)

Production control of manufacturing systems with production rate-dependent failure rates. - George Liberopoulos; Michael Caramanis (IEEE Trans. Autom. Control., 1994)

Dynamics and design of a class of parameterized manufacturing flow controllers. - George Liberopoulos; Michael Caramanis (IEEE Trans. Autom. Control., 1995)

On the ordering of optimal hedging points in a class of manufacturing flow control models. - George Liberopoulos; Jian-Qiang Hu (IEEE Trans. Autom. Control., 1995)

A unified framework for pull control mechanisms in multi-stage manufacturing systems. - George Liberopoulos; Yves Dallery (Ann. Oper. Res., 2000)

Systems Analysis Speeds Up Chipita's Food-Processing Line. - George Liberopoulos; Panagiotis Tsarouhas (Interfaces, 2002)

The Value of Advance Demand Information in Production/Inventory Systems. - Fikri Karaesmen; George Liberopoulos; Yves Dallery (Ann. Oper. Res., 2004)

Preface. - George Liberopoulos; Baris Tan; Stanley B. Gershwin; C. T. Papadopoulos; James MacGregor Smith (Ann. Oper. Res., 2004)

Determining quality inspection frequency in an automated production line based on field failure data analysis. - Panagiotis Tsarouhas; George Liberopoulos (Oper. Res., 2004)

An analytical method for the performance evaluation of echelon kanban control systems. - Stelios Koukoumialos; George Liberopoulos (OR Spectr., 2005)

Stochastic models for the design, coordination, and control of manufacturing systems. - George Liberopoulos; C. T. Papadopoulos; Baris Tan; J. MacGregor Smith; Stanley B. Gershwin (OR Spectr., 2005)

Performance Evaluation of an Automatic Transfer Line with WIP Scrapping During Long Failures. - George Liberopoulos; George Kozanidis; Panagiotis Tsarouhas (Manuf. Serv. Oper. Manag., 2007)

On the tradeoff between optimal order-base-stock levels and demand lead-times. - George Liberopoulos (Eur. J. Oper. Res., 2008)

Production scheduling of a multi-grade PET resin plant. - George Liberopoulos; George Kozanidis; Olympia Hatzikonstantinou (Comput. Chem. Eng., 2010)

Introduction to the special issue on Advances in Manufacturing Systems. - Tom Van Woensel; John A. Buzacott; Stanley B. Gershwin; George Liberopoulos; J. MacGregor Smith; Semyon M. Meerkov; Baris Tan (Ann. Oper. Res., 2011)

The stochastic economic lot sizing problem for non-stop multi-grade production with sequence-restricted setup changeovers. - George Liberopoulos; Dimitrios G. Pandelis; Olympia Hatzikonstantinou (Ann. Oper. Res., 2013)

Editorial: Stochastic models of manufacturing and service system operations. - George Liberopoulos; James MacGregor Smith; Chrissoleon T. Papadopoulos; Tullio Tolio (Ann. Oper. Res., 2013)

Heuristics for flight and maintenance planning of mission aircraft. - George Kozanidis; Andreas Gavranis; George Liberopoulos (Ann. Oper. Res., 2014)

Advances in stochastic models of manufacturing and service operations. - Baris Tan; Stanley B. Gershwin; George Liberopoulos; Semyon M. Meerkov; C. T. Papadopoulos (Ann. Oper. Res., 2015)

Critical Review of Pricing Schemes in Markets with Non-Convex Costs. - George Liberopoulos; Panagiotis Andrianesis 001 (Oper. Res., 2016)

Performance evaluation of a production line operated under an echelon buffer policy. - George Liberopoulos (CoRR, 2019)

Optimal supplier inventory control policies when buyer purchase incidence is driven by past service. - George Liberopoulos; Michalis Deligiannis (Eur. J. Oper. Res., 2022)

Optimal pricing and capacity management in service systems with delay-sensitive mixed-risk customers. - Michalis Deligiannis; Myron Benioudakis; George Liberopoulos; Apostolos Burnetas (Int. J. Prod. Res., 2024)