An intelligent FFT-analyzer. - Giovanni Betta; Massimo D'Apuzzo; Consolatina Liguori; Antonio Pietrosanto (IEEE Trans. Instrum. Meas., 1998)

An advanced neural-network-based instrument fault detection and isolation scheme. - Giovanni Betta; Consolatina Liguori; Antonio Pietrosanto (IEEE Trans. Instrum. Meas., 1998)

Comparison between IFDI schemes based on expert systems and neural networks. - Giovanni Betta; Consolatina Liguori; Antonio Pietrosanto (IEEE Trans. Instrum. Meas., 1998)

A Gray-code-based fiber optic liquid level transducer. - Giovanni Betta; Antonio Pietrosanto; Antonio Scaglione (IEEE Trans. Instrum. Meas., 1998)

Microcontroller-based performance enhancement of an optical fiber level transducer. - Giovanni Betta; Antonio Pietrosanto; Antonio Scaglione (IEEE Trans. Instrum. Meas., 1998)

A measurement system based on magnetic sensors for nondestructive testing. - Andrea Bernieri; Giovanni Betta; Guglielmo Rubinacci; Fabio Villone (IEEE Trans. Instrum. Meas., 2000)

An intrinsic fiber optic temperature sensor. - Giovanni Betta; Antonio Pietrosanto (IEEE Trans. Instrum. Meas., 2000)

Instrument fault detection and isolation: state of the art and new research trends. - Giovanni Betta; Antonio Pietrosanto (IEEE Trans. Instrum. Meas., 2000)

Temperature measurement by multifiber optical sensor. - Giovanni Betta; Antonio Pietrosanto; Antonio Scaglione (IEEE Trans. Instrum. Meas., 2000)

A multi-application FFT analyzer based on a DSP architecture. - Giovanni Betta; Consolatina Liguori; Antonio Pietrosanto (IEEE Trans. Instrum. Meas., 2001)

An enhanced fiber-optic temperature sensor system for power transformer monitoring. - Giovanni Betta; Antonio Pietrosanto; Antonio Scaglione (IEEE Trans. Instrum. Meas., 2001)

Characterization of an eddy-current-based system for nondestructive testing. - Andrea Bernieri; Giovanni Betta; Luigi Ferrigno (IEEE Trans. Instrum. Meas., 2002)

A DSP-based FFT-analyzer for the fault diagnosis of rotating machine based on vibration analysis. - Giovanni Betta; Consolatina Liguori; Alfredo Paolillo; Antonio Pietrosanto (IEEE Trans. Instrum. Meas., 2002)

Improving nondestructive testing probe performance by digital processing techniques. - Andrea Bernieri; Giovanni Betta; Luigi Ferrigno (IEEE Trans. Instrum. Meas., 2003)

A biaxial probe for nondestructive testing on conductive materials. - Andrea Bernieri; Giovanni Betta; Luigi Ferrigno; Marco Laracca (IEEE Trans. Instrum. Meas., 2004)

An automated self-calibrated instrument for nondestructive testing on conductive materials. - Andrea Bernieri; Giovanni Betta; Luigi Ferrigno; Marco Laracca (IEEE Trans. Instrum. Meas., 2004)

Evaluation of the measurement uncertainties in the conducted emissions from adjustable speed electrical power drive systems. - Giovanni Betta; Domenico Capriglione; G. Tomasso Tomasso (IEEE Trans. Instrum. Meas., 2004)

Uncertainty evaluation in algorithms with conditional statement. - Giovanni Betta; Consolatina Liguori; Antonio Pietrosanto (IEEE Trans. Instrum. Meas., 2004)

SVM-based approach for instrument fault accomodation in automotive systems. - Giovanni Betta; Andrea Bernieri; Domenico Capriglione; Mario Molinara (VECIMS, 2005)

Reproducibility and Uncertainty of Conducted Emission Measurements for Adjustable-Speed Electrical Power Drive Characterization. - Giovanni Betta; Domenico Capriglione; Marco Laracca (IEEE Trans. Instrum. Meas., 2006)

Influence of Wi-Fi computer interfaces on RF measurement systems. - Giovanni Betta; Domenico Capriglione; Luigi Ferrigno; Gianfranco Miele (VECIMS, 2007)

Experimental Investigation of the Electromagnetic Interference of ZigBee Transmitters on Measurement Instruments. - Giovanni Betta; Domenico Capriglione; Luigi Ferrigno; Gianfranco Miele (IEEE Trans. Instrum. Meas., 2008)

A Statistical Approach for Improving the Performance of a Testing Methodology for Measurement Software. - Giovanni Betta; Domenico Capriglione; Antonio Pietrosanto; Paolo Sommella (IEEE Trans. Instrum. Meas., 2008)

A Methodology to Test Instrument Software: An Automotive Diagnostic System Application. - Giovanni Betta; Domenico Capriglione; Antonio Pietrosanto; Paolo Sommella (IEEE Trans. Instrum. Meas., 2008)

Influence of Wi-Fi Computer Interfaces on Measurement Apparatuses. - Giovanni Betta; Domenico Capriglione; Luigi Ferrigno; Gianfranco Miele (IEEE Trans. Instrum. Meas., 2010)

The accurate calibration of EMC antennas in compact chambers - Measurements and uncertainty evaluations. - Giovanni Betta; Domenico Capriglione; Carlo F. M. Carobbi; Marco Donald Migliore (Comput. Stand. Interfaces, 2011)

GMR-Based ECT Instrument for Detection and Characterization of Crack on a Planar Specimen: A Hand-Held Solution. - Giovanni Betta; Luigi Ferrigno; Marco Laracca (IEEE Trans. Instrum. Meas., 2012)

A novel biaxial probe implementing multifrequency excitation and SVM processing for NDT. - Andrea Bernieri; Giovanni Betta; Luigi Ferrigno; Marco Laracca (I2MTC, 2013)

Face based recognition algorithms: The use of uncertainty in the classification. - Giovanni Betta; Domenico Capriglione; Mariella Corvino; Consolatina Liguori; Alfredo Paolillo (I2MTC, 2013)

Modelling, parametric analysis, and optimization of an experimental set-up for acoustic antenna calibration. - Orsola Petrella; Salvatore Ameduri; Vincenzo Quaranta; Giovanni Betta; Marco Laracca (I2MTC, 2013)

Crack Depth Estimation by Using a Multi-Frequency ECT Method. - Andrea Bernieri; Giovanni Betta; Luigi Ferrigno; Marco Laracca (IEEE Trans. Instrum. Meas., 2013)

Face Based Recognition Algorithms: A First Step Toward a Metrological Characterization. - Giovanni Betta; Domenico Capriglione; Mariella Corvino; Consolatina Liguori; Alfredo Paolillo (IEEE Trans. Instrum. Meas., 2013)

Cost-Effective FPGA Instrument for Harmonic and Interharmonic Monitoring. - Giovanni Betta; Luigi Ferrigno; Marco Laracca (IEEE Trans. Instrum. Meas., 2013)

Proposal and analysis of new algorithms for wideband spectrum sensing in cognitive radio. - Leopoldo Angrisani; Giovanni Betta; Domenico Capriglione; Gianni Cerro; Luigi Ferrigno; Gianfranco Miele (I2MTC, 2014)

Managing the uncertainty for face classification with 3D features. - Giovanni Betta; Domenico Capriglione; Michele Gasparetto; Emanuele Zappa; Consolatina Liguori; Alfredo Paolillo (I2MTC, 2014)

Optimized complex signals for Eddy Current Testing. - Giovanni Betta; Luigi Ferrigno; Marco Laracca; Pietro Burrascano; Marco Ricci 001 (I2MTC, 2014)

Multifrequency Excitation and Support Vector Machine Regressor for ECT Defect Characterization. - Andrea Bernieri; Giovanni Betta; Luigi Ferrigno; Marco Laracca; Stefano Mastrostefano (IEEE Trans. Instrum. Meas., 2014)

An Experimental Setup for the Calibration of Acoustic Antenna. - Orsola Petrella; Salvatore Ameduri; Vincenzo Quaranta; Giovanni Betta; Marco Laracca (IEEE Trans. Instrum. Meas., 2014)

A Proposal for the Management of the Measurement Uncertainty in Classification and Recognition Problems. - Giovanni Betta; Domenico Capriglione; Mariella Corvino; Consolatina Liguori; Alfredo Paolillo (IEEE Trans. Instrum. Meas., 2015)

Improving the Performance of an AMR-Based Current Transducer for Metering Applications. - Giovanni Betta; Domenico Capriglione; Luigi Ferrigno; Antonio Rasile (Sensors, 2016)

Sensitivity analysis of influence quantities on signal-to-noise ratio in face-based recognition systems. - Giovanni Betta; Domenico Capriglione; Mariella Corvino; Consolatina Liguori; Paolo Sommella (I2MTC, 2017)

ECT probe improvement for in-service non-destructive testing on conductive materials. - Andrea Bernieri; Giovanni Betta; Luigi Ferrigno; Marco Laracca; Antonio Rasile (I2MTC, 2018)

Characterization of a TMR Sensor for EC-NDT Applications. - Andrea Bernieri; Giovanni Betta; Luigi Ferrigno; Marco Laracca; Antonio Rasile (Sensors, 2018)

Improvement of the Frequency Behavior of an EC-NDT Inspection System. - Andrea Bernieri; Giovanni Betta; Luigi Ferrigno; Marco Laracca; Antonio Rasile (Sensors, 2018)

Fast Eddy Current Testing Defect Classification Using Lissajous Figures. - Gianni D'Angelo; Marco Laracca; Salvatore Rampone; Giovanni Betta (IEEE Trans. Instrum. Meas., 2018)

Experimental Comparison of Extrapolation Techniques for 24-Hours Electromagnetic Fields Human Exposure Evaluation to UMTS and LTE Base Stations. - Andrea Bernieri; Giovanni Betta; Gianni Cerro; Gianfranco Miele; Domenico Capriglione (M&N, 2019)

Contaminants detection and classification through a customized IoT-based platform: A case study. - Giovanni Betta; Gianni Cerro; Marco Ferdinandi; Luigi Ferrigno; Mario Molinara (IEEE Instrum. Meas. Mag., 2019)

On the Reliability of Extrapolation Techniques for Verifying the Compliance of LTE Cellular Systems with RF Human Exposure Limits. - Giovanni Betta; Gianni Cerro; Gianfranco Miele; Marzia Salone D'Amata; Domenico Capriglione (I2MTC, 2020)

On the Measurement of Human Exposure to Cellular Networks. - Giovanni Betta; Domenico Capriglione; Gianni Cerro; Gianfranco Miele; Marzia Salone D'Amata; Darko Suka; Predrag V. Pejovic; Mirjana Simic-Pejovic (IEEE Instrum. Meas. Mag., 2020)

Characterization of 3D Image-Based Biometric Systems in Dynamic Acquisition Conditions. - Giovanni Betta; Domenico Capriglione; Marzia Salone D'Amata; Consolatina Liguori; Emanuele Zappa (I2MTC, 2021)

Repeatability analysis of decoder-based EMF exposure measurements in LTE cellular systems. - Giovanni Betta; Domenico Capriglione; Gianfranco Miele; Marco Donald Migliore; Marzia Salone D'Amata; Gianni Cerro (I2MTC, 2021)

LTE Human Exposure Evaluation: Maximum RF Field Strength Extrapolation Technique Repeatability Analysis. - Andrea Bernieri; Giovanni Betta; Domenico Capriglione; Gianni Cerro; Gianfranco Miele; Marzia Salone D'Amata (IEEE Trans. Instrum. Meas., 2021)

Human Exposure to 4G LTE Systems: Enhancing the Reliability of EMF Extrapolation Techniques Based on Spectrum Analyzer Measurements. - Giovanni Betta; Domenico Capriglione; Gianni Cerro; Gianfranco Miele; Marzia Salone D'Amata (IEEE Trans. Instrum. Meas., 2021)

Coronavirus Label-Free Immunosensor: Preliminary Results. - Rocco Cancelliere; Laura Micheli; Elisabetta Suffredini; Stefano Bellucci; Giovanni Betta; Luigi Ferrigno; Antonio Maffucci; Gianfranco Miele (AISEM, 2022)

5G DSS communications: pilot signals' variability analysis from measurements on the field. - Giovanni Betta; Domenico Capriglione; Gianni Cerro; Gianfranco Miele; Marco Donald Migliore; Darko Suka (I2MTC, 2022)

Temperature stress tests on low-cost IMU systems: Analysis and first proposal for enhancing performance. - Gabriele Patrizi; Marcantonio Catelani; Lorenzo Ciani; Marco Carratù; Antonio Pietrosanto; Paolo Sommella; Giovanni Betta; Domenico Capriglione (I2MTC, 2022)

Experimental analysis of 5G pilot signals' variability in urban scenarios. - Giovanni Betta; Domenico Capriglione; Gianni Cerro; Gianfranco Miele; Marco Donald Migliore; Darko Suka (M&N, 2022)

Stress Testing for Performance Analysis of Orientation Estimation Algorithms. - Giovanni Betta; Domenico Capriglione; Marco Carratù; Marcantonio Catelani; Lorenzo Ciani; Gabriele Patrizi; Antonio Pietrosanto; Paolo Sommella (IEEE Trans. Instrum. Meas., 2022)

Human exposure to 5G systems: experimental analysis and measurement issues in FR1 and FR2 operating bands. - Giovanni Betta; Domenico Capriglione; Gianni Cerro; Gianfranco Miele; Sangin Qahtan Wali; M. Ruttner; Aduwati Sali; Darko Suka (I2MTC, 2023)

The Impact of Energy Measurement in Fault Detection: A Preliminary Analysis of Load Profiling Capability. - Luca Tari; Giovanni Betta; Luigi Ferrigno; Antonello Monti; Ferdinanda Ponci (I2MTC, 2024)

S-Parameter Analysis of Age Testing Effects on FR4-Based Printed Circuit Boards up to 10 GHz. - Lewis Manning; Martin J. Salter; Martin Wickham; Ana Robador; Osman Sibonjic; Sani Sarcevic; Semir Cohodarevic; Giovanni Betta; Domenico Capriglione; Gianfranco Miele (M&N, 2024)

On the Feasibility of LoRaWAN Communication in a Smart Road Sensor Network. - Giovanni Betta; Domenico Capriglione; Luigi Ferrigno; Gianfranco Miele; Keerthana Velusamy (MetroAutomotive, 2025)