Position and Attitude Precision Analysis of Segment Erector of Shield Tunneling Machine. - Hu Shi; Guofang Gong; Huayong Yang; Rulin Zhou (ICIRA, 2009)

Electrohydraulic Control of Thrust Hydraulic System for Shield Tunneling Machine. - Beidou Zhu; Guofang Gong; Hu Shi (ICIRA, 2009)

Rotation and Gate Movement Compound Control of Screw Conveyor Hydraulic System with Disturbance Compensation. - Lintao Wang; Guofang Gong; Hu Shi; Huaiyin Liu (ICIRA (1), 2010)

Parametric Analysis of New Tamping Device Based on the Mathematic Modeling. - Yi Liu; Guofang Gong; Chaoqing Min; Xuelan Yang (ICDMA, 2011)

Modeling of Hydraulic Controlled and Regulated Direct Method in the Cutter System of Shield Tunneling Machine. - Huaiyin Liu; Guofang Gong; Hu Shi; Lintao Wang (ICDMA, 2011)

Positioning Precision and Impact Force Control of Segment Erector for Shield Tunneling Machine. - Lintao Wang; Guofang Gong; Hu Shi; Dianqing Hou (ICDMA, 2012)

Research on Dynamic Characteristics of the Rotary Valve. - Xuelan Yang; Guofang Gong; Yi Liu; Chaoqing Min (ICDMA, 2012)

An experimental study on energy saving potential for cutterhead drive of shield Tunneling machine using variable-speed hydraulic system. - Hu Shi; Guofang Gong; Xuesong Mei; Xiaohu Li (AIM, 2014)

Research on geologic adaptive control of ground pressure for single gripping TBM. - Yunyi Rao; Guofang Gong; Xu Yang; Jianjun Zhou (ICCAIS, 2015)

Synchronization Control of Torque Cylinders for Hard Rock Tunnel Boring Machine. - Zhen Zhang; Guofang Gong; Huayong Yang; Weiqiang Wu; Tong Liu (ICIRA (3), 2015)

Dynamic simulation of a hydraulic exoskeleton robot based on virtual prototyping. - Shuo Ding; Xiaoping Ouyang 002; Boqian Fan; Huayong Yang; Guofang Gong (AIM, 2016)

Development of a novel elastic load-carrying device: Design, modeling and analysis. - Tong Li 009; Qingguo Li; Tao Liu 006; Jingang Yi; Guofang Gong (AIM, 2016)

Quantitative feedback controller design and test for an electro-hydraulic position control system in a large-scale reflecting telescope. - Xiong-bin Peng; Guofang Gong; Huayong Yang; Hai-yang Lou; Weiqiang Wu; Tong Liu (Frontiers Inf. Technol. Electron. Eng., 2017)

Modeling and Analysis of Hydraulic Controlled Rotary Valve Excitation System. - Wenjing Li; Guofang Gong; Yuanchao Wang; Yakun Zhang; Yuxi Chen (AIM, 2019)

Nonlinear Disturbance Observer based Integral Sliding Mode Control for Tunnel Boring Machine. - Guofang Gong; Fei Wang; Yongfeng Qin; Chenchen Sun (RCAR, 2019)

Fuzzy sliding mode control for synchronization of multiple induction motors drive. - Chenchen Sun; Guofang Gong; Huayong Yang; Fei Wang (Trans. Inst. Meas. Control, 2019)

A novel cutterhead cascade control strategy for hybrid-driving tunnel boring machines. - Fei Wang 084; Guofang Gong; Yongfeng Qin; Chenchen Sun; Huayong Yang (J. Syst. Control. Eng., 2020)

Design and Test of Hardware-in-the-Loop Platform for Vehicle Chassis CAN System with Intermittent Open and Short Connection Faults. - Longkai Wang; Shilun Du; Guofang Gong; Yong Lei (M2VIP, 2023)

A Gravity-Assisted Piezoelectric Inertial Actuator for Bidirectional Smooth Drives by Single Excitation Source. - Guangda Qiao; Fang Lu; Guofang Gong; Huayong Yang; Dong Han (IEEE Trans. Ind. Electron., 2024)

A Bistable Four-Working-States Electromagnetic Mini Valve Based on Flexible Magnets for Pneumatic Soft Actuators. - Pengfei Han; Fang Lu; Guofang Gong; Huayong Yang; Dong Han (IEEE Trans. Ind. Electron., 2024)

An Ultradurable Piezoelectric Inertia Actuator via Wear-Adaptive Mechanism. - Guangda Qiao; Yangqianhui Zhang; Qing Cao; Chaoying Wang; Zhe Chen; Guofang Gong; Huayong Yang; Dong Han (IEEE Trans. Ind. Electron., 2025)