Rotor speed estimation in electrical drives via digital second order sliding differentiator. - Alfonso Damiano; Gianluca Gatto; Ignazio Marongiu; Alessandro Pisano; Elio Usai (ECC, 1999)

Robust speed and torque estimation in electrical drives by second-order sliding modes. - Giorgio Bartolini; Alfonso Damiano; Gianluca Gatto; Ignazio Marongiu; Alessandro Pisano; Elio Usai (IEEE Trans. Control. Syst. Technol., 2003)

Second-order sliding-mode control of DC drives. - Alfonso Damiano; Gianluca Gatto; Ignazio Marongiu; Alessandro Pisano (IEEE Trans. Ind. Electron., 2004)

Predictive control of standalone brushless DC generators. - Gianluca Gatto; Ignazio Marongiu; Alessandro Serpi; Aldo Perfetto (ICECS, 2009)

A novel flux-weakening approach for Surface-Mounted Permanent Magnet Synchronous Machines. - Alfonso Damiano; Gianluca Gatto; Ignazio Marongiu; Alessandro Serpi; Aldo Perfetto (IECON, 2013)

Concentrator photovoltaic standards: Experimental analyses of technical requirements. - Alfonso Damiano; Ignazio Marongiu; Claudia Musio; Maura Musio (IECON, 2013)

Outdoor characterization of a Cassegrain-type concentrator photovoltaic receiver. - Alfonso Damiano; Ignazio Marongiu; Claudia Musio; Maura Musio (IECON, 2013)

Design of a 10 MW multi-phase PM synchronous generator for direct-drive wind turbines. - Alfonso Damiano; Ignazio Marongiu; Andrea Monni; Mario Porru (IECON, 2013)

A suitable PWM for DC-link voltage equalization of Three-Level Neutral-Point Clamped Converters. - Alfonso Damiano; Ignazio Marongiu; Mario Porru; Alessandro Serpi (IECON, 2013)

A novel continuous-time equivalent circuit for boost DC-DC converters. - Gianluca Gatto; Ignazio Marongiu; Andrea Mocci; Alessandro Serpi; Ivan Luigi Spano (IECON, 2013)

An improved averaged model for boost DC-DC converters. - Gianluca Gatto; Ignazio Marongiu; Andrea Mocci; Alessandro Serpi; Ivan Luigi Spano (IECON, 2013)

Discrete-Time Parameter Identification of a Surface-Mounted Permanent Magnet Synchronous Machine. - Gianluca Gatto; Ignazio Marongiu; Alessandro Serpi (IEEE Trans. Ind. Electron., 2013)

Enhanced modeling of DC-DC power converters by means of averaging technique. - Andrea Mocci; Alessandro Serpi; Ignazio Marongiu; Gianluca Gatto (IECON, 2014)

A novel DC-link voltage and current control algorithm for Neutral-Point-Clamped converters. - Mario Porru; Alessandro Serpi; Ignazio Marongiu; Alfonso Damiano (IECON, 2014)

Operating Constraints Management of a Surface-Mounted PM Synchronous Machine by Means of an FPGA-Based Model Predictive Control Algorithm. - Alfonso Damiano; Gianluca Gatto; Ignazio Marongiu; Aldo Perfetto; Alessandro Serpi (IEEE Trans. Ind. Informatics, 2014)

A novel hybrid energy storage system for electric vehicles. - Mario Porru; Alessandro Serpi; Ignazio Marongiu; Alfonso Damiano (IECON, 2015)

Performance improvement of brushless DC machine by zero-sequence current injection. - Alessandro Serpi; Giuseppe Fois; Federico Deiana; Gianluca Gatto; Ignazio Marongiu (IECON, 2015)

An Automatic Sensing Test procedure for Implantable Cardioverter Defibrillators. - Ivan Luigi Spano; Sara Sulis; Alessandro Serpi; Ignazio Marongiu; Gianluca Gatto; Vincenzo Nissardi (MeMeA, 2015)

Efficiency assessment of permanent magnet synchronous machines for High-Speed Flywheel Energy Storage Systems. - Federico Deiana; Alessandro Serpi; Ignazio Marongiu; Gianluca Gatto; Johan Abrahamsson (IECON, 2016)

Suppression of DC-link voltage unbalance in three-level neutral-point clamped converters. - Mario Porru; Alessandro Serpi; Ignazio Marongiu; Alfonso Damiano (J. Frankl. Inst., 2018)