A simple method for the parameter identification of the Jiles-Atherton model using only symmetric hysteresis loops. - Andreas Lindner; Ingo Hahn; Andreas Boehm (IECON, 2013)

Measurement of magnetic properties of steel at high temperatures. - Andreas Boehm; Ingo Hahn (IECON, 2014)

Sensorless capability of an interior permanent magnet synchronous machine with a short-circuited rotor winding. - Johannes Graus; Ingo Hahn (IECON, 2014)

Simulation of a toroidal wound flux-switching permanent magnet machine. - Andreas Lindner; Ingo Hahn (IECON, 2014)

Modeling single and double stator axial eddy current brakes considering current displacement, magnetic leakage, fringing and saturation using coupled electric and magnetic equivalent circuits. - Stefan Meier; Ingo Hahn (IECON, 2014)

Self-sensing control of permanent-magnet synchronous machines with multiple saliencies using pulse-voltage-injection. - Lei Chen; Gunther Götting; Simon Dietrich; Ingo Hahn (IAS, 2015)

Improved accuracy of sensorless position estimation by combining resistance- and inductance-based saliency tracking. - Johannes Graus; Ingo Hahn (IECON, 2015)

Modeling integrated magnetic gears using a magnetic equivalent circuit. - Dominik Thyroff; Stefan Meier; Ingo Hahn (IECON, 2015)

Alternative ways of cooling an e-core flux-switching permanent magnet machine with large air-gap. - Andreas Lindner; Ingo Hahn (IECON, 2016)

Modeling of an IPMSM with short-circuited rotor winding for sensorless position estimation by FEA using the frozen permeability method. - Christoph Hittinger; Ingo Hahn (IECON, 2017)

Investigation on different pole configurations of an outer rotor integrated magnetic gear. - Dominik Thyroff; Ingo Hahn (IECON, 2017)

Experimental Verification of a Passively Cooled Large Air-Gap 6/8-Flux-Switching Permanent Magnet Machine Including Manufacturing. - Andreas Lindner; Ingo Hahn (IECON, 2018)

Torque Harmonics Minimization of Double-Stage Magnetic Gear Transmission System. - Andrea Floris; Alessandro Serpi; Alfonso Damiano; Ingo Hahn (IECON, 2019)

Resistance- and Inductance-Based Self-Sensing Control using Short-Circuited Windings on the Rotor of a SPMSM. - Christoph Hittinger; Ingo Hahn (IECON, 2019)

Axially Stacked Multiphase Flux Reversal Machine. - Jaeho Ryu; Ingo Hahn (IECON, 2019)

Short-Circuited Rotor Windings for Improving the Electromagnetic Saliency for Inductance- and Resistance-Based Self-Sensing Control. - Christoph Hittinger; Ingo Hahn (ISIE, 2019)

Nonlinear Optimization of Energy Consumption in Trajectory Planning of a Single-axis Electrical Drive. - Sara Hosseini; Ingo Hahn (ISIE, 2019)

Structural Optimization of an Electromagnetic Actuator Based on Genetic Algorithm, Greedy Search and Their Combination. - Shabnam Ruzbehi; Ingo Hahn (ISIE, 2019)

Different Iron Loss Models for Electrical Steel Sheets considering Harmonic Flux Signals. - Matthias Stiller; Ingo Hahn (ISIE, 2019)

Kinodynamic Motion Planning and Energy Loss Cost Function Modelling for a 2- DOF Robot Arm Manipulator. - Sara Hosseini; Ingo Hahn (ICIT, 2020)

Two-level Topology Optimization of an Electromagnetic Actuator Based on Genetic Algorithm and Neighbourhood Method. - Shabnam Ruzbehi; Ingo Hahn (ICIT, 2020)

A Performance Comparison of GaN FET and Silicon MOSFET. - Shima Khoshzaman; Ingo Hahn (ICIT, 2021)

Numerical modeling for 3D eddy current calculation in magneto-quasistatic approximation. - Jaeho Ryu; Ingo Hahn (ICIT, 2021)

Dynamic On-State Resistance Characterization of GaN FET under Hard-Switching Conditions. - Shima Khoshzaman; Yikai Tang; Ingo Hahn (IECON, 2021)

Two-level Topology Optimization based on a Metaheuristic Method and Morphological Reconstruction. - Shabnam Ruzbehi; Ingo Hahn (IECON, 2021)

Deterministic winding function model for slotted induction machines validated by air gap magnetic field measurements. - Matthias Stiller; Ingo Hahn (IECON, 2021)

Modelling the Influence of the Mechanical Forces on the Commutation Process of a DC Motor. - Johannes Wagner 007; Ingo Hahn (IECON, 2021)

Topology Optimization of a PM Synchronous Machine Based on Novel Metaheuristic Algorithm for Lower Cogging Torque and Magnet Volume. - Shabnam Ruzbehi; Ingo Hahn (ICIT, 2022)

On Experimental Energy Consumption Estimation of a 6-DoF Industrial UR3e Robot Arm Manipulator in Trajectory Planning. - Sara Hosseini; Ingo Hahn (RO-MAN, 2024)