On the guaranteed throughput and efficiency of closed re-entrant lines. - James R. Morrison; P. R. Kumar 001 (Queueing Syst. Theory Appl., 1998)

A unified approach to linear programming bounds for queueing networks: systems with polyhedral invariance of transition probabilities. - James R. Morrison; P. R. Kumar 001 (CDC, 2000)

Queueing Network Analysis of Semiconductor Manufacturing Plants - James R. Morrison (2000)

New Linear Program Performance Bounds for Closed Queueing Networks. - James R. Morrison; P. R. Kumar 001 (Discret. Event Dyn. Syst., 2001)

Implementation of a Fluctuation Smoothing Production Control Policy in IBM's 200mm Wafer Fab. - James R. Morrison; Brian Campbell 006; Elizabeth Dews; John LaFreniere (CDC/ECC, 2005)

On the Throughput of Clustered Photolithography Tools: Wafer Advancement and Intrinsic Equipment Loss. - James R. Morrison; Maruthi Kumar Mutnuri (CASE, 2007)

Performance evaluation of photolithography cluster tools. - James R. Morrison; Donald P. Martin (OR Spectr., 2007)

Practical Extensions to Cycle Time Approximations for the G/G/m-Queue With Applications. - James R. Morrison; Donald P. Martin (IEEE Trans Autom. Sci. Eng., 2007)

Flow lines with regular service times: Evolution of delay, state dependent failures and semiconductor wafer fabrication. - James R. Morrison (CASE, 2008)

Computational Performance Bounds for Markov Chains With Applications. - James R. Morrison; Panganamala Ramana Kumar (IEEE Trans. Autom. Control., 2008)

Regular flow line models for semiconductor cluster tools: A case of lot dependent process times. - James R. Morrison (CASE, 2009)

Equipment Models for Fab Level Proudction Simulation: Practical Features and Computational Tractability. - James Robert Morrison (WSC, 2009)

Analysis of circular cluster tools: Transient behavior and semiconductor equipment models. - Younghun Ahn; James R. Morrison (CASE, 2010)

A framework for stepwise life cycle assessment during product design with case-based reasoning. - Myeon-Gyu Jeong; Hyo-Won Suh; James R. Morrison (CASE, 2010)

Performance evaluation of deterministic flow lines: Redundant modules and application to semiconductor manufacturing equipment. - Kyungsu Park; James R. Morrison (CASE, 2010)

Closed form solutions for the equilibrium probability distribution in the closed Lu-Kumar network under two buffer priority policies. - Seunghwan Jung; James R. Morrison (ICCA, 2010)

Control of wafer release in multi cluster tools. - Kyungsu Park; James R. Morrison (ICCA, 2010)

Deterministic Flow Lines With Applications. - James R. Morrison (IEEE Trans Autom. Sci. Eng., 2010)

On the fidelity of the ax+b equipment model for clustered photolithography scanners in fab-level simulation. - James R. Morrison (WSC, 2011)

Cluster tool design comparisons via simulation. - Kyungsu Park; James R. Morrison (WSC, 2011)

UAV Consumable Replenishment: Design Concepts for Automated Service Stations. - Paulo Kemper Filho; Koji A. O. Suzuki; James R. Morrison (J. Intell. Robotic Syst., 2011)

Multiclass Flow Line Models of Semiconductor Manufacturing Equipment for Fab-Level Simulation. - James R. Morrison (IEEE Trans Autom. Sci. Eng., 2011)

Guest Editorial Equipment and Operations Automation in the Semiconductor Industry. - James R. Morrison; Chen-Fu Chien 001; Stéphane Dauzère-Pérès; Milind Dawande; Han Ding 001; Jeffrey S. Pettinato; Jingang Yi (IEEE Trans Autom. Sci. Eng., 2011)

On the throughput of deterministic flow lines with random state dependent setups: Stochastic models and applications. - Woo-sung Kim; James R. Morrison (CASE, 2012)

Performance bounds for hybrid flow lines: Fundamental behavior, practical features and application to linear cluster tools. - Kyungsu Park; James R. Morrison (CASE, 2012)

Automatic Battery Replacement System for UAVs: Analysis and Design. - Koji A. O. Suzuki; Paulo Kemper Filho; James R. Morrison (J. Intell. Robotic Syst., 2012)

Approximate life cycle assessment using case-based reasoning for the eco design of products. - Myeon-Gyu Jeong; James R. Morrison; Hyo-Won Suh (CASE, 2013)

Transient scheduling of single armed cluster tools: Algorithms for wafer residency constraints. - Hongyue Jin; James R. Morrison (CASE, 2013)

On the equilibrium probabilities of deterministic flow lines with random arrivals. - Woo-sung Kim; James R. Morrison (CASE, 2013)

Efficient location and allocation strategies for undesirable facilities considering their fundamental properties. - Byung Duk Song; James R. Morrison; Young Dae Ko (Comput. Ind. Eng., 2013)

On the Scheduling of Systems of UAVs and Fuel Service Stations for Long-Term Mission Fulfillment. - Jonghoe Kim; Byung Duk Song; James R. Morrison (J. Intell. Robotic Syst., 2013)

Non-product form equilibrium probabilities in a class of two-station closed reentrant queueing networks. - Woo-sung Kim; James R. Morrison (Queueing Syst. Theory Appl., 2013)

Editorial: Automation in green manufacturing. - Jingshan Li; James R. Morrison; Mike Tao Zhang; Masaru Nakano; Stephan Biller; Bengt Lennartson (IEEE Trans Autom. Sci. Eng., 2013)

Mean cycle time optimization in semiconductor tool sets via PM planning with different cycles: a G/G/m queueing and nonlinear programming approach. - James R. Morrison; Hungil Kim; Adar A. Kalir (WSC, 2014)

On the Concerted Design and Scheduling of Multiple Resources for Persistent UAV Operations. - Jonghoe Kim; James R. Morrison (J. Intell. Robotic Syst., 2014)

Tablet PC-based Visual Target-Following System for Quadrotors. - Jeongwoon Kim; David Hyunchul Shim; James R. Morrison (J. Intell. Robotic Syst., 2014)

Persistent UAV Service: An Improved Scheduling Formulation and Prototypes of System Components. - Byung Duk Song; Jonghoe Kim; Jeongwoon Kim; Hyorin Park; James R. Morrison; David Hyunchul Shim (J. Intell. Robotic Syst., 2014)

Markovian modeling of multiclass deterministic flow lines with random arrivals: The case of a single-channel. - Sang-Yoon Bae; James R. Morrison (CASE, 2015)

Product modularity to jointly address functional and ecological requirements in the early design stage. - Myeon-Gyu Jeong; James R. Morrison; Hyo-Won Suh (CASE, 2015)

Simulation studies on model selection in PM planning optimization. - Minho Lee; James R. Morrison; Adar A. Kalir (WSC, 2015)

The throughput rate of serial production lines with deterministic process times and random setups: Markovian models and applications to semiconductor manufacturing. - Woo-sung Kim; James R. Morrison (Comput. Oper. Res., 2015)

Approximate Life Cycle Assessment via Case-Based Reasoning for Eco-Design. - Myeon-Gyu Jeong; James R. Morrison; Hyo-Won Suh (IEEE Trans Autom. Sci. Eng., 2015)

On Equilibrium Probabilities for the Delays in Deterministic Flow Lines With Random Arrivals. - Woo-sung Kim; James R. Morrison (IEEE Trans Autom. Sci. Eng., 2015)

Controlled Wafer Release in Clustered Photolithography Tools: Flexible Flow Line Job Release Scheduling and an LMOLP Heuristic. - Kyungsu Park; James R. Morrison (IEEE Trans Autom. Sci. Eng., 2015)

Mean cycle time approximations for G/G/m queueing networks using decomposition without aggregation with application to fab datasets. - Jinho Shin; James R. Morrison; Dean Grosbard; Adar Kalir (WSC, 2016)

Semiconductor manufacturing intelligence and automation. - Chen-Fu Chien 001; Chia-Yu Hsu 003; James R. Morrison; Runliang Dou (Comput. Ind. Eng., 2016)

Rolling Horizon Path Planning of an Autonomous System of UAVs for Persistent Cooperative Service: MILP Formulation and Efficient Heuristics. - Byung Duk Song; Jonghoe Kim; James R. Morrison (J. Intell. Robotic Syst., 2016)

Markovian property for the delays in multiclass deterministic flow lines with random arrivals. - Sang-Yoon Bae; James R. Morrison (CASE, 2017)

On the accuracy of analytic approximations for the mean cycle time in semiconductor manufacturing equipment with PM events. - Minho Lee; James R. Morrison; Adar A. Kalir; Kosta Rozen (CASE, 2017)

Exit Time Recursions, Recording Principles, and Queue Equivalence in Generalized Regular Flow Lines. - Sang-Yoon Bae; James R. Morrison (CASE, 2019)

On the Optimization Of Cycle Time in Assembly Lines with Parallel Workstations and Tasks Requiring Multiple Workers. - Jinho Shin; Minho Lee; James R. Morrison (CASE, 2019)

A Numerical Study on the Structure of Optimal Preventive Maintenance Policies in Prototype Tandem Queues. - Taehyung Kim; James R. Morrison (WSC, 2019)

On the Consequences of Un-Modeled Dynamics to the Optimality of Schedules in Clustered Photolithography Tools. - Hyeong-Ook Kim; Se-Hyeon Park; Jung Yeon Park; James R. Morrison (WSC, 2019)

Scalable and transferable learning of algorithms via graph embedding for multi-robot reward collection. - Hyunwook Kang; Aydar Mynbay; James R. Morrison; Jinkyoo Park (CoRR, 2019)

Decomposition without aggregation for performance approximation in queueing network models of semiconductor manufacturing. - Jinho Shin; Dean Grosbard; James R. Morrison; Adar Kalir (Int. J. Prod. Res., 2019)

Artificial intelligence in manufacturing and logistics systems: algorithms, applications, and case studies. - Chen-Fu Chien 001; Stéphane Dauzère-Pérès; Woonghee Tim Huh; Young Jae Jang; James R. Morrison (Int. J. Prod. Res., 2020)

On Scheduling a Photolithograhy Toolset Based on a Deep Reinforcement Learning Approach with Action Filter. - Taehyung Kim; Hyeong-Ook Kim; Tae-Eog Lee; James Robert Morrison; Eungjin Kim (WSC, 2021)

Learning NP-Hard Multi-Agent Assignment Planning using GNN: Inference on a Random Graph and Provable Auction-Fitted Q-learning. - Hyunwook Kang; Taehwan Kwon; Jinkyoo Park; James R. Morrison (NeurIPS, 2022)

Fundamental Behaviors in Hybrid Deterministic Flow Lines With Applications. - Sang-Yoon Bae; James R. Morrison (IEEE Trans Autom. Sci. Eng., 2022)

Special Issue on Automation Analytics Beyond Industry 4.0: From Hybrid Strategy to Zero-Defect Manufacturing. - Fan-Tien Cheng; Chia-Yen Lee; Min-Hsiung Hung; Lars Mönch; James R. Morrison; Kaibo Liu (IEEE Trans Autom. Sci. Eng., 2022)

Persistent Drone Light Shows: Petri Net Models, Performance Evaluation and Resource Requirements. - Mirza Essa Neebraz; Ammar Altaweel; James R. Morrison (AIBThings, 2023)