Thermal Analysis of Radial-Flux Electrical Machines With a High Power Density. - Janne Nerg; Marko Rilla; Juha J. Pyrhönen (IEEE Trans. Ind. Electron., 2008)

High-Speed High-Output Solid-Rotor Induction-Motor Technology for Gas Compression. - Juha J. Pyrhönen; Janne Nerg; Panu Kurronen; Uwe Lauber (IEEE Trans. Ind. Electron., 2010)

Dynamic Torque Analysis of a Wind Turbine Drive Train Including a Direct-Driven Permanent-Magnet Generator. - Jussi T. Sopanen; Vesa Ruuskanen; Janne Nerg; Juha J. Pyrhönen (IEEE Trans. Ind. Electron., 2011)

AC resistance calculation methods and practical design considerations when using litz wire. - Vesa Vaisanen; Jani Hiltunen; Janne Nerg; Pertti Silventoinen (IECON, 2013)

Lumped-parameter-based thermal analysis of a doubly radial forced-air-cooled direct-driven permanent magnet wind generator. - Janne Nerg; Vesa Ruuskanen (Math. Comput. Simul., 2013)

AC Resistance Factor of Litz-Wire Windings Used in Low-Voltage High-Power Generators. - Henry Hamalainen; Juha J. Pyrhönen; Janne Nerg; Joonas Talvitie (IEEE Trans. Ind. Electron., 2014)

Feasibility of an Armature-Reaction-Compensated Permanent-Magnet Synchronous Generator in Island Operation. - Katteden Kamiev; Janne Nerg; Juha J. Pyrhönen; Valeriy Zaboin; Juan A. Tapia (IEEE Trans. Ind. Electron., 2014)

Direct-Driven Interior Magnet Permanent-Magnet Synchronous Motors for a Full Electric Sports Car. - Janne Nerg; Marko Rilla; Vesa Ruuskanen; Juha J. Pyrhönen; Sami Ruotsalainen (IEEE Trans. Ind. Electron., 2014)

An analysis of the 6-slot 2-pole high-speed permanent magnet synchronous machines with tooth-coil windings. - Nikita Uzhegov; Janne Nerg; Juha Pyrhönen (IECON, 2015)

Hysteresis Losses in Sintered NdFeB Permanent Magnets in Rotating Electrical Machines. - Juha J. Pyrhönen; Sami Ruoho; Janne Nerg; Martti Paju; Sampo Tuominen; Harri Kankaanpää; Raivo Stern; Aldo Boglietti; Nikita Uzhegov (IEEE Trans. Ind. Electron., 2015)

Drive Cycle Analysis of a Permanent-Magnet Traction Motor Based on Magnetostatic Finite-Element Analysis. - Vesa Ruuskanen; Janne Nerg; Juha J. Pyrhönen; Sami Ruotsalainen; Ralph Kennel (IEEE Trans. Veh. Technol., 2015)

Iron Loss Analysis of the Permanent-Magnet Synchronous Machine Based on Finite-Element Analysis Over the Electrical Vehicle Drive Cycle. - Vesa Ruuskanen; Janne Nerg; Marko Rilla; Juha J. Pyrhönen (IEEE Trans. Ind. Electron., 2016)

Multidisciplinary Design Process of a 6-Slot 2-Pole High-Speed Permanent-Magnet Synchronous Machine. - Nikita Uzhegov; Emil Kurvinen; Janne Nerg; Juha J. Pyrhönen; Jussi T. Sopanen; Sergey V. Shirinskii (IEEE Trans. Ind. Electron., 2016)

Linking technological system architecture and purchasing categories. - Elina Karttunen; Janne Nerg (HICSS, 2017)

A New Traction Motor System With Integrated-Gear: A Solution for Off-Road Machinery. - Juho Montonen; Janne Nerg; Mehmet Gulec; Juha Pyrhönen (IEEE Access, 2019)

Integration Principles and Thermal Analysis of an Oil-Cooled and -Lubricated Permanent Magnet Motor Planetary Gearbox Drive System. - Juho Montonen; Janne Nerg; Maria Polikarpova; Juha J. Pyrhönen (IEEE Access, 2019)

Influence of Magnetic and Nonmagnetic Layers in an Axially Laminated Anisotropic Rotor of a High-Speed Synchronous Reluctance Motor Including Manufacturing Aspects. - Valerii Abramenko; Janne Nerg; Ilya Petrov; Juha Pyrhönen (IEEE Access, 2020)

Synchronous Reluctance Motors With an Axially Laminated Anisotropic Rotor as an Alternative in High-Speed Applications. - Valerii Abramenko; Ilya Petrov; Janne Nerg; Juha Pyrhönen (IEEE Access, 2020)

Third-Order Harmonics in Synchronous Reluctance Motors With an Axially Laminated Anisotropic Rotor and Their Impact on the Motor Losses. - Valerii Abramenko; Ilya Petrov; Janne Nerg; Juha Pyrhönen (IEEE Access, 2020)

Rotordynamic Simulation Method of Induction Motors Including the Effects of Unbalanced Magnetic Pull. - Heesoo Kim 001; Janne Nerg; Tuhin Choudhury; Jussi T. Sopanen (IEEE Access, 2020)

Unbalanced Magnetic Pull Effects on Rotordynamics of a High-Speed Induction Generator Supported by Active Magnetic Bearings - Analysis and Experimental Verification. - Heesoo Kim 001; Eerik Sikanen; Janne Nerg; Teemu Sillanpää; Jussi T. Sopanen (IEEE Access, 2020)

Impact of the Current Vector Angle on the Performance of a Synchronous Reluctance Motor With an Axially Laminated Anisotropic Rotor. - Valerii Abramenko; Ilya Petrov; Janne Nerg; Juha Pyrhönen (IEEE Access, 2021)

Magneto-Thermal Analysis of an Axial-Flux Permanent-Magnet-Assisted Eddy-Current Brake at High-Temperature Working Conditions. - Mehmet Gulec; Metin Aydin; Janne Nerg; Pia Lindh; Juha J. Pyrhönen (IEEE Trans. Ind. Electron., 2021)