A simulation optimization approach in production planning of failure prone manufacturing systems. - Jean-Pierre Kenné; Ali Gharbi (J. Intell. Manuf., 2001)

Position Control of an Electro-Hydraulic Servosystem - A Non-Linear Backstepping Approach. - Claude Kaddissi; Jean-Pierre Kenné; Maarouf Saad (ICINCO (2), 2004)

A simulation optimization based control policy for failure prone one-machine, two-product manufacturing systems. - Jean-Pierre Kenné; Ali Gharbi (Comput. Ind. Eng., 2004)

Stohastic optimal production control problem with corrective maintenance. - Jean-Pierre Kenné; Ali Gharbi (Comput. Ind. Eng., 2004)

Drive by wire control of an electro-hydraulic active suspension a backstepping approach. - Claude Kaddissi; Jean-Pierre Kenné; Maarouf Saad (CCA, 2005)

Maintenance scheduling and production control of multiple-machine manufacturing systems. - Ali Gharbi; Jean-Pierre Kenné (Comput. Ind. Eng., 2005)

Age-dependent production planning and maintenance strategies in unreliable manufacturing systems with lost sale. - Jean-Pierre Kenné; Anis Gharbi; M. Beit (Eur. J. Oper. Res., 2007)

Développement d'une politique intégrée de contrôle des taux de production et de maintenance corrective avec diagnostic. - Robert Pellerin; Jean-François Boulet; Ali Gharbi; Jean-Pierre Kenné (INFOR Inf. Syst. Oper. Res., 2007)

Modeling and control of a 7DOF exoskeleton robot for arm movements. - Mohammad Habibur Rahman; Maarouf Saad; Jean-Pierre Kenné; Philippe S. Archambault (ROBIO, 2009)

Hierarchical decision making in production and repair/replacement planning with imperfect repairs under uncertainties. - F. I. Dehayem Nodem; Jean-Pierre Kenné; Anis Gharbi (Eur. J. Oper. Res., 2009)

On the integrated production, inventory and preventive maintenance problem in manufacturing systems with backorder. - Jean-Pierre Kenné; Ali Gharbi; Najib M. Najid (Int. J. Simul. Process. Model., 2009)

Joint production and supply control in three levels flexible manufacturing systems. - Adnène Hajji; Ali Gharbi; Jean-Pierre Kenné (J. Intell. Manuf., 2010)

Nonlinear control of an upper-limb exoskelton robot. - Mohammad Habibur Rahman; Thierry Kittel-Ouimet; Maarouf Saad; Jean-Pierre Kenné; Philippe S. Archambault (ICECS, 2011)

Tele-operation of a robotic exoskeleton for rehabilitation and passive arm movement assistance. - Mohammad Habibur Rahman; Thierry Kittel-Ouimet; Maarouf Saad; Jean-Pierre Kenné; Philippe S. Archambault (ROBIO, 2011)

Control of a powered exoskeleton for elbow, forearm and wrist joint movements. - Mohammad Habibur Rahman; Thierry Kittel-Ouimet; Maarouf Saad; Jean-Pierre Kenné; Philippe S. Archambault (ROBIO, 2011)

Production control and replenishment strategy with multiple suppliers. - Adnène Hajji; Ali Gharbi; Jean-Pierre Kenné; Robert Pellerin (Eur. J. Oper. Res., 2011)

Dynamic Modeling and Evaluation of a Robotic Exoskeleton for Upper-Limb Rehabilitation. - Mohammad Habibur Rahman; Thierry Kittel-Ouimet; Maarouf Saad; Jean-Pierre Kenné; Philippe S. Archambault (Int. J. Inf. Acquis., 2011)

Nonlinear Sliding Mode Control Implementation of an Upper Limb Exoskeleton Robot to Provide Passive Rehabilitation Therapy. - Mohammad Habibur Rahman; Maarouf Saad; Jean-Pierre Kenné; Philippe S. Archambault (ICIRA (2), 2012)

Cartesian trajectory tracking of an upper limb exoskeleton robot. - Mohammad Habibur Rahman; Maarouf Saad; Cristóbal Ochoa-Luna; Jean-Pierre Kenné; Philippe S. Archambault (IECON, 2012)

Development of a 4DoFs exoskeleton robot for passive arm movement assistance. - Mohammad Habibur Rahman; Maarouf Saad; Jean-Pierre Kenné; Philippe S. Archambault; Thierry Kittel-Ouimet (Int. J. Mechatronics Autom., 2012)

Simultaneous control of maintenance and production rates of a manufacturing system with defective products. - Achille N. Njike; Robert Pellerin; Jean-Pierre Kenné (J. Intell. Manuf., 2012)

Feedback Linearization-Based Position Control of an Electrohydraulic Servo System With Supply Pressure Uncertainty. - H. A. Mintsa; R. Venugopal; Jean-Pierre Kenné; C. Belleau (IEEE Trans. Control. Syst. Technol., 2012)

Analytical Modelling and Control of a Hybrid Manufacturing/remanufacturing System. - Annie Kouedeu; Jean-Pierre Kenné; Pierre Dejax; Victor Songmene; Vladimir Polotski (MIM, 2013)

Manufacturing-Remanufacturing Failure-Prone Systems under Random Demands. - Vladimir Polotski; Samir Ouaret; Jean-Pierre Kenné; Ali Gharbi (MIM, 2013)

Failure-prone manufacturing systems with setups: feasibility and optimality under various hypotheses about perturbations and setup interplay. - Vladimir Polotski; Jean-Pierre Kenné; Ali Gharbi (Int. J. Math. Oper. Res., 2015)

Development of a whole arm wearable robotic exoskeleton for rehabilitation and to assist upper limb movements. - Mohammad Habibur Rahman; Md. Jahidur Rahman; Cristóbal Ochoa-Luna; Maarouf Saad; Jean-Pierre Kenné; Philippe S. Archambault (Robotica, 2015)

Production control of a deteriorated remanufacturing system within an open-reverse supply chain. - F. I. Dehayem Nodem; Jean-Pierre Kenné (MED, 2016)

Production Planning of a Failure-Prone Manufacturing System under Different Setup Scenarios. - Guy-Richard Kibouka; Donatien Nganga-Kouya; Jean-Pierre Kenné; Victor Songmene; Vladimir Polotski (J. Appl. Math., 2016)

Set-up and production planning in hybrid manufacturing-remanufacturing systems with large returns. - Vladimir Polotski; Jean-Pierre Kenné; Ali Gharbi (Int. J. Prod. Res., 2017)

Production and replacement policies for a deteriorating manufacturing system under random demand and quality. - Samir Ouaret; Jean-Pierre Kenné; Ali Gharbi (Eur. J. Oper. Res., 2018)

A chattering-free fuzzy hybrid sliding mode control of an electrohydraulic active suspension. - Bassel Shaer; Jean-Pierre Kenné; Claude Kaddissi; Charles J. Fallaha (Trans. Inst. Meas. Control, 2018)

Production control of hybrid manufacturing-remanufacturing systems under demand and return variations. - Vladimir Polotski; Jean-Pierre Kenné; Ali Gharbi (Int. J. Prod. Res., 2019)

Joint optimization of production and maintenance strategies considering a dynamic sampling strategy for a deteriorating system. - Héctor Rivera-Gómez; Ali Gharbi; Jean-Pierre Kenné; Oscar Montaño Arango; Jose Ramón Corona-Armenta (Comput. Ind. Eng., 2020)

A Hybrid Architecture for a Reconfigurable Cellular Remanufacturing System. - Camilo Mejía-Moncayo; Jean-Pierre Kenné; Lucas A. Hof (APMS (2), 2021)

Multi-scenario and multi-criteria approach to evaluate prediction techniques used to recognise failure patterns. - Mahdi Mohammadi Tehrani; Mohammadsadegh Mobin; Yvan Beauregard; Michel Rioux; Jean-Pierre Kenné (Int. J. Appl. Decis. Sci., 2021)

Modelling for cost and productivity optimisation in sustainable manufacturing: a case of dry versus wet machining of mould steels. - Oluwole Olufayo; Victor Songmene; Jean-Pierre Kenné; Michael Ayomoh (Int. J. Prod. Res., 2021)

On the development of a smart architecture for a sustainable manufacturing-remanufacturing system: A literature review approach. - Camilo Mejía-Moncayo; Jean-Pierre Kenné; Lucas A. Hof (Comput. Ind. Eng., 2023)

A novel approach for predicting Lockout/Tagout safety procedures for smart maintenance strategies. - Victor Delpla; Kévin Chapron; Jean-Pierre Kenné; Lucas A. Hof (Int. J. Prod. Res., 2024)

Estimation-based production control of manufacturing-remanufacturing systems with uncertain seasonal return and imprecise demand and inventory. - Vladimir Polotski; Jean-Pierre Kenné; Ali Gharbi (Int. J. Prod. Res., 2024)

Advanced Predictive Process Control for Industrial Thickeners. - Mouna El Hamrani; Khalid Benjelloun; Jean-Pierre Kenné; Maarouf Saad; Mohamed El Khouakhi (SIMULTECH, 2025)

Optimization of the Backstepping Control Parameters of an Active Electrohydraulic Suspension to Improve Passenger Comfort and Road Handling. - Rachid Fattah; Jean-Pierre Kenné; Khalid Benjelloun; Ahmed Chebak (IEEE Access, 2025)