Fault diagnosis of nuclear power plant based on genetic-RBF neural network. - Chun-Ling Xie; Jen-Yuan (James) Chang; Xiao-Cheng Shi; Jing-Min Dai (Int. J. Comput. Appl. Technol., 2010)

Machine vision assistance for flex cable-actuator comb manufacturing in hard disk drives. - Jen-Yuan (James) Chang; Jr-Yi Shen (Int. J. Intell. Syst. Technol. Appl., 2010)

Design and development of the wearable hand exoskeleton system for rehabilitation of hand impaired patients. - Shu-Wei Pu; Sung-Yu Tsai; Jen-Yuan (James) Chang (CASE, 2014)

Modeling and development of tension force measurement system for cable-driven hand exoskeleton robot. - Shu-Wei Pu; Hsien-Ting Chang; Jen-Yuan (James) Chang (AIM, 2015)

Development of magnetorheological fluid clutch for robotic arm applications. - Manuel A. Fernández; Jen-Yuan (James) Chang (AMC, 2016)

A Novel Design and Fabrication of Tactile Sensor for Humanoid Robot Finger. - Min-Chieh Chou; Jen-Yuan (James) Chang; Chieh Yang; Guan-Ting Lin; Tune-Hune Kao; Meng-Chi Huang (AIM, 2018)

Soft medical robotics: clinical and biomedical applications, challenges, and future directions. - Jen-Hsuan Hsiao; Jen-Yuan (James) Chang; Chao-Min Cheng (Adv. Robotics, 2019)

Usability Assessment of a Cable-Driven Exoskeletal Robot for Hand Rehabilitation. - Yu-Lin Tsai; Jian-Jia Huang; Shu-Wei Pu; Hsiang-Peng Chen; Shao-Chih Hsu; Jen-Yuan (James) Chang; Yu-Cheng Pei (Frontiers Neurorobotics, 2019)

Guest Editorial introduction to the Focused section on wearable sensors, actuators, and robots for rehabilitation. - Shane S. Q. Xie; Samit Chakrabarty; Jen-Yuan (James) Chang; Chao-Chieh Lan; Xiaolin Huang; Andrew McDaid (Int. J. Intell. Robotics Appl., 2019)

Sensor Glove Based on Novel Inertial Sensor Fusion Control Algorithm for 3-D Real-Time Hand Gestures Measurements. - Hsien-Ting Chang; Jen-Yuan (James) Chang (IEEE Trans. Ind. Electron., 2020)

Decoupling Finger Joint Motion in an Exoskeletal Hand: A Design for Robot-Assisted Rehabilitation. - Shu-Wei Pu; Yu-Cheng Pei; Jen-Yuan (James) Chang (IEEE Trans. Ind. Electron., 2020)

Design of an Adjustable Fail-Safe MRF Clutch With a Novel Field Blocking Mechanism for Robotic Applications. - Manuel A. Fernández; Jen-Yuan (James) Chang (IEEE Access, 2021)

Magnetic Reference Mark in a Linear Positioning System Generated by a Single Wiegand Pulse. - Hung-Lin Lien; Jen-Yuan (James) Chang (Sensors, 2022)

Wireless Monitoring of Gearbox Vibrations with Embedded Sensors Using LabVIEW. - Li-Te Huang; Jen-Yuan (James) Chang (ICKII, 2023)

Increasing Sensitivity of Magnetic Tactile Sensors by Optimizing Arrangement of PM Array. - Yen-Ping Lin; Kai-Yang Peng; Jen-Yuan (James) Chang (SENSORS, 2023)

Length-Adaptive Linear Position Sensing System Based on De-Bruijn Sequence. - Kai-Yang Peng; Heng-Sheng Hsiao; Jen-Yuan (James) Chang (SENSORS, 2023)

Digital Model-Based Approach for Predicting Gearbox Remaining Useful Life Using Response Surface Methodology. - Li-Te Huang; Jen-Yuan (James) Chang (IEEE SENSORS, 2024)

Enhanced Design of an Adaptive Anthropomorphic Finger through Integration of Modular Soft Actuators and Kinematic Modeling. - Sheng-Guan Lin; Jen-Yuan (James) Chang (Robotics, 2024)

An adaptive disturbance compensation method for force-sensorless control systems applied to robotic milling. - Han-Hao Tsai; Jen-Yuan (James) Chang (Robotics Comput. Integr. Manuf., 2026)