Ein Verdrahtungssystem für den rechnergestützten Layoutentwurf von Multichipträgern. - Jens Lienig (1991)

Routing algorithms for multi-chip modules. - Jens Lienig; Krishnaiyan Thulasiraman; M. N. S. Swamy (EURO-DAC, 1992)

A Genetic Algorithm for Channel Routing in VLSI Circuits. - Jens Lienig; Krishnaiyan Thulasiraman (Evol. Comput., 1993)

GASBOR: A Genetic Algorithm for Switchbox Routing in Integrated Circuits. - Jens Lienig; Krishnaiyan Thulasiraman (Evo Workshops, 1994)

An Evolutionary Algorithm for the Routing of Multi-Chip Modules. - Jens Lienig; Holger Brandt (PPSN, 1994)

A New Genetic Algorithm for the Channel Routing Problem. - Jens Lienig; Krishnaiyan Thulasiraman (VLSI Design, 1994)

Genetic Algorithms Applied to the Physical Design of VLSI Circuits: A Survey. - Jens Lienig; James P. Cohoon (PPSN, 1996)

Gasbor: a Genetic Algorithm Approach for Solving the switchbox Routing Problem. - Jens Lienig; Krishnaiyan Thulasiraman (J. Circuits Syst. Comput., 1996)

Channel and Switchbox Routing with Minimized Crosstalk - A Parallel Genetic Algorithm Approach. - Jens Lienig (VLSI Design, 1997)

A parallel genetic algorithm for performance-driven VLSI routing. - Jens Lienig (IEEE Trans. Evol. Comput., 1997)

AnalogRouter: a new approach of current-driven routing for analog circuits. - Jens Lienig; Goeran Jerke; Thorsten Adler (DATE, 2001)

Hierarchical Current Density Verification for Electromigration Analysis in Arbitrary Shaped Metallization Patterns of Analog Circuits. - Goeran Jerke; Jens Lienig (DATE, 2002)

Electromigration Avoidance in Analog Circuits: Two Methodologies for Current-Driven Routing. - Jens Lienig; Goeran Jerke; Thorsten Adler (ASP-DAC/VLSI Design, 2002)

Current-driven wire planning for electromigration avoidance in analog circuits. - Jens Lienig; Göran Jerke (ASP-DAC, 2003)

Reliability-driven layout decompaction for electromigration failure avoidance in complex mixed-signal IC designs. - Goeran Jerke; Jens Lienig; Jürgen Scheible (DAC, 2004)

Hierarchical current-density verification in arbitrarily shaped metallization patterns of analog circuits. - Göran Jerke; Jens Lienig (IEEE Trans. Comput. Aided Des. Integr. Circuits Syst., 2004)

Interconnect and current density stress: an introduction to electromigration-aware design. - Jens Lienig (SLIP, 2005)

Electromigration-Aware Physical Design of Integrated Circuits. - Jens Lienig; Göran Jerke (VLSI Design, 2005)

introduction to electromigration-aware physical design. - Jens Lienig (ISPD, 2006)

Novel Pin Assignment Algorithms for Components with Very High Pin Counts. - Tilo Meister; Jens Lienig; Gisbert Thomke (DATE, 2008)

A constraint-driven methodology for placement of analog and mixed-signal integrated circuits. - Ammar Nassaj; Jens Lienig; Göran Jerke (ICECS, 2008)

Universal Methodology to Handle Differential Pairs during Pin Assignment. - Tilo Meister; Jens Lienig; Gisbert Thomke (VLSI-SoC (Selected Papers), 2008)

A new methodology for constraint-driven layout design of analog circuits. - Ammar Nassaj; Jens Lienig; Goeran Jerke (ICECS, 2009)

Constraint-driven design: the next step towards analog design automation. - Göran Jerke; Jens Lienig (ISPD, 2009)

From 3D circuit technologies and data structures to interconnect prediction. - Robert Fischbach; Jens Lienig; Tilo Meister (SLIP, 2009)

Solution space investigation and comparison of modern data structures for heterogeneous 3D designs. - Robert Fischbach; Jens Lienig; Matthias Thiele (3DIC, 2010)

Integration of multi physics modeling of 3D stacks into modern 3D data structures. - Peter Schneider; Andy Heinig; Robert Fischbach; Jens Lienig; Sven Reitz; Jörn Stolle; Andreas Wilde (3DIC, 2010)

Early-stage determination of current-density criticality in interconnects. - Göran Jerke; Jens Lienig (ISQED, 2010)

VLSI Physical Design - From Graph Partitioning to Timing Closure. - Andrew B. Kahng; Jens Lienig; Igor L. Markov; Jin Hu (Springer, 2011)

An ontology for constraints in custom IC design. - Andreas Krinke; Jens Lienig (ECCTD, 2011)

Investigating modern layout representations for improved 3d design automation. - Robert Fischbach; Jens Lienig; Johann Knechtel (ACM Great Lakes Symposium on VLSI, 2011)

Assembling 2D blocks into 3D chips. - Johann Knechtel; Igor L. Markov; Jens Lienig (ISPD, 2011)

Interface optimization for improved routability in chip-package-board co-design. - Tilo Meister; Jens Lienig; Gisbert Thomke (SLIP, 2011)

Multiobjective optimization of deadspace, a critical resource for 3D-IC integration. - Johann Knechtel; Igor L. Markov; Jens Lienig; Matthias Thiele (ICCAD, 2012)

Assembling 2-D Blocks Into 3-D Chips. - Johann Knechtel; Igor L. Markov; Jens Lienig (IEEE Trans. Comput. Aided Des. Integr. Circuits Syst., 2012)

Extended constraint management for analog and mixed-signal IC design. - Andreas Krinke; Maximilian Mittag; Göran Jerke; Jens Lienig (ECCTD, 2013)

Adaptive data model for efficient constraint handling in AMS IC design. - Andreas Krinke; Goeran Jerke; Jens Lienig (ICECS, 2013)

Utilizing 2D and 3D rectilinear blocks for efficient IP reuse and floorplanning of 3D-integrated systems. - Robert Fischbach; Johann Knechtel; Jens Lienig (ISPD, 2013)

Electromigration and its impact on physical design in future technologies. - Jens Lienig (ISPD, 2013)

Novel moving-magnet electrodynamic feed units for small machine tools. - Thomas Bödrich; Fabian Ehle; Michael Süßenbecker; Jens Lienig (Prod. Eng., 2013)

Structural planning of 3D-IC interconnects by block alignment. - Johann Knechtel; Evangeline F. Y. Young; Jens Lienig (ASP-DAC, 2014)

Automation of Analog IC Layout: Challenges and Solutions. - Jürgen Scheible; Jens Lienig (ISPD, 2015)

Planning Massive Interconnects in 3-D Chips. - Johann Knechtel; Evangeline F. Y. Young; Jens Lienig (IEEE Trans. Comput. Aided Des. Integr. Circuits Syst., 2015)

Load-Aware Redundant Via Insertion for Electromigration Avoidance. - Steve Bigalke; Jens Lienig (ISPD, 2016)

Physical Design Automation for 3D Chip Stacks: Challenges and Solutions. - Johann Knechtel; Jens Lienig (ISPD, 2016)

A novel polygon-based circuit extraction algorithm for full custom designed MEMS sensors. - Axel Hald; Johannes Seelhorst; Mathias Reimann; Jürgen Scheible; Jens Lienig (SMACD, 2016)

IIP framework: A tool for reuse-centric analog circuit design. - Benjamin Prautsch; Uwe Eichler; Sunil Satish Rao; Bjorn Zeugmann; Ajith Puppala; Torsten Reich; Jens Lienig (SMACD, 2016)

A new method for the analysis of movement dependent parasitics in full custom designed MEMS sensors. - Axel Hald; Johannes Seelhorst; Pekka Herzogenrath; Jürgen Scheible; Jens Lienig (SMACD, 2017)

MESH: Explicit and flexible generation of analog arrays. - Benjamin Prautsch; Uwe Eichler; Torsten Reich; Jens Lienig (SMACD, 2017)

Exploring the use of the finite element method for electromigration analysis in future physical design. - Matthias Thiele; Steve Bigalke; Jens Lienig (VLSI-SoC, 2017)

Electromigration Analysis of VLSI Circuits Using the Finite Element Method. - Matthias Thiele; Steve Bigalke; Jens Lienig (VLSI-SoC (Selected Papers), 2017)

Large-Scale 3D Chips: Challenges and Solutions for Design Automation, Testing, and Trustworthy Integration. - Johann Knechtel; Ozgur Sinanoglu; Ibrahim Abe M. Elfadel; Jens Lienig; Cliff C. N. Sze (IPSJ Trans. Syst. LSI Des. Methodol., 2017)

Optimal die placement for interposer-based 3D ICs. - Sergii Osmolovskyi; Johann Knechtel; Igor L. Markov; Jens Lienig (ASP-DAC, 2018)

The need and opportunities of electromigration-aware integrated circuit design. - Steve Bigalke; Jens Lienig; Göran Jerke; Jürgen Scheible; Roland Jancke (ICCAD, 2018)

The Pressing Need for Electromigration-Aware Physical Design. - Jens Lienig; Matthias Thiele (ISPD, 2018)

Increasing EM Robustness of Placement and Routing Solutions based on Layout-Driven Discretization. - Steve Bigalke; Jens Lienig; Thorben Casper; Sebastian Schöps (PRIME, 2018)

FLUTE-EM: Electromigration-Optimized Net Considering Topology Currents and Mechanical Stress. - Steve Bigalke; Jens Lienig (VLSI-SoC, 2018)

Full custom MEMS design: A new method for the analysis of motion-dependent parasitics. - Axel Hald; Pekka Herzogenrath; Jürgen Scheible; Jens Lienig; Johannes Seelhorst; Peter Brandl (Integr., 2018)

Multi-Objective 3D Floorplanning with Integrated Voltage Assignment. - Johann Knechtel; Jens Lienig; Ibrahim Abe M. Elfadel (ACM Trans. Design Autom. Electr. Syst., 2018)

A Graph-Based Model of Micro-Transfer Printing for Cost-Optimized Heterogeneous 2.5D Systems. - Robert Fischbach; Tilman Horst; Jens Lienig (3DIC, 2019)

Assembly-Related Chip/Package Co-Design of Heterogeneous Systems Manufactured by Micro-Transfer Printing. - Robert Fischbach; Tilman Horst; Jens Lienig (DATE, 2019)

From Constraints to Tape-Out: Towards a Continuous AMS Design Flow. - Andreas Krinke; Tilman Horst; Georg Gläser; Martin Grabmann; Tobias Markus; Benjamin Prautsch; Uwe Hatnik; Jens Lienig (DDECS, 2019)

Parasitic Extraction Methodology for MEMS Sensors with Active Devices. - Axel Hald; Robert Wolf; Johannes Seelhorst; Jürgen Scheible; Jens Lienig; Stefan Tibus; Mike Schwarz (SMACD, 2019)

A Globally-optimized Co-design Approach for Heterogeneous Systems Using Convex Optimization. - Tilman Horst; Robert Fischbach; Jens Lienig (ECCTD, 2020)

Avoidance vs. repair: New approaches to increasing electromigration robustness in VLSI routing. - Steve Bigalke; Jens Lienig (Integr., 2020)

Exploring Physical Synthesis for Circuits based on Emerging Reconfigurable Nanotechnologies. - Andreas Krinke; Shubham Rai; Akash Kumar 001; Jens Lienig (ICCAD, 2021)

Toward Security Closure in the Face of Reliability Effects ICCAD Special Session Paper. - Jens Lienig; Susann Rothe; Matthias Thiele; Nikhil Rangarajan; Mohammed Ashraf; Mohammed Nabeel 001; Hussam Amrouch; Ozgur Sinanoglu; Johann Knechtel (ICCAD, 2021)

Reliability by Design: Avoiding Migration-Induced Failure in IC Interconnects. - Susann Rothe; Jens Lienig (SBCCI, 2022)

A Multi-level Analog IC Design Flow for Fast Performance Estimation Using Template-based Layout Generators and Structural Models. - Benjamin Prautsch; Thomas Markwirth; Frank Schenkel; Reimund Wittmann; Uwe Eichler; Jens Lienig (SMACD, 2022)

Non-occlusive pumping principle for blood pump application. - Sebastian Pech; René Richter; Jens Lienig (Autom., 2022)

Combined Modeling of Electromigration, Thermal and Stress Migration in AC Interconnect Lines. - Susann Rothe; Jens Lienig (ISPD, 2023)

Introduction to the Special Section on Advances in Physical Design Automation. - Iris Hui-Ru Jiang; David G. Chinnery; Gracieli Posser; Jens Lienig (ACM Trans. Design Autom. Electr. Syst., 2023)

Layout Verification Using Open-Source Software. - Andreas Krinke; Robert Fischbach; Jens Lienig (ISPD, 2024)

Stress-based Electromigration Modeling in IC Design: Moving from Theory to Practice. - Susann Rothe; Jens Lienig; Sachin S. Sapatnekar (SMACD, 2024)

Thermal Modeling of Silicon Photonic Waveguides. - Matthias Thiele; Jens Lienig; Menglong He; Kambiz Jamshidi (SMACD, 2025)