High dynamic control of a three-level voltage-source-converter drive for a main strip mill. - Joachim Böcker; Jörg Janning; Helmut Jebenstreit (IEEE Trans. Ind. Electron., 2002)

Advanced convoy control strategy for autonomously driven railway vehicles. - Christian Henke; Norbert Fröhleke; Joachim Böcker (ITSC, 2006)

Design of Power Supply for Driving High Power Piezoelectric Actuators. - Rongyuan Li; Michael Loenneker; Norbert Fröhleke; Joachim Böcker (IAS, 2008)

Anwendung von Augmented Reality zur visuellen Analyse einer Konvoi-Simulation am Beispiel der Neuen Bahntechnik Paderborn. - Jürgen Gausemeier; Rafael Radkowski; Helene Waßmann; Joachim Böcker; Christian Henke (SimVis, 2008)

A new approach for online multiobjective optimization of mechatronic systems. - Katrin Witting; Bernd Schulz; Michael Dellnitz; Joachim Böcker; Norbert Fröhleke (Int. J. Softw. Tools Technol. Transf., 2008)

Regelung elektrischer Traktionsantriebe in Elektro- und Hybridfahrzeugen (Control of Electric Propulsion Drives in Electric and Hybrid Vehicles). - Joachim Böcker; Tobias Huber; Michael Meyer; Wilhelm Peters; Daniel Pohlenz; Andreas Specht (Autom., 2010)

Elektromobilität - ein aktuelles Forschungsfeld insbesondere der Regelungstechnik. - Claus Kröger; Joachim Böcker; Konstantin Neiß (Autom., 2010)

Time-domain steady-state modeling of series-parallel resonant converter under optimized modulation. - Zhiyu Cao; Junbing Tao; Norbert Fröhleke; Joachim Böcker (IECON, 2012)

Design of a high performance ferrite magnet-assisted synchronous reluctance motor for an electric vehicle. - Milind Paradkar; Joachim Böcker (IECON, 2012)

A precise open-loop torque control for an interior permanent magnet synchronous motor (IPMSM) considering iron losses. - Wilhelm Peters; Oliver Wallscheid; Joachim Böcker (IECON, 2012)

Novel dynamical modeling for series-parallel resonant converter. - Zhiyu Cao; Franklin H. Nzeugang; Junbing Tao; Norbert Fröhleke; Joachim Böcker (ISIE, 2012)

Optimal control of a switched reluctance drive by a direct method using a discrete variational principle. - Kathrin Flaßkamp; Sina Ober-Blöbaum; Tobias Schneider; Joachim Böcker (CDC, 2013)

Online capable optimized planning of power split in a hybrid energy storage system. - Karl Stephan Stille; Christoph Romaus; Joachim Böcker (EUROCON, 2013)

FPGA-based dynamically reconfigurable control of induction motor drives. - Oleg Buchholz; Joachim Böcker (IECON, 2013)

Two-phase interleaving configuration of the LLC resonant converter - Analysis and experimental evaluation. - Heiko Figge; Tobias Grote; Frank Schafmeister; Norbert Fröhleke; Joachim Böcker (IECON, 2013)

Discrete-time design of adaptive current controller for interior permanent magnet synchronous motors (IPMSM) with high magnetic saturation. - Wilhelm Peters; Joachim Böcker (IECON, 2013)

A completely modular power converter for high-power high-current DC applications. - Jitendra Solanki; Norbert Fröhleke; Joachim Böcker (IECON, 2013)

Analytical and Offline Approach to Select Optimal Hysteresis Bands of DTC for PMSM. - Shashidhar Mathapati; Joachim Böcker (IEEE Trans. Ind. Electron., 2013)

Examples of Self-optimizing Systems. - Joachim Böcker; Christian Heinzemann; Christian Hölscher; Jan Henning Keßler; Bernd Kleinjohann; Lisa Kleinjohann; Claudia Priesterjahn; Christoph Rasche 002; Peter Reinold; Christoph Romaus; Thomas Schierbaum; Tobias Schneider; et al. (Design Methodology for Intelligent Technical Systems, 2014)

Comparison of PWM AC chopper topologies. - Marc Hagemeyer; Jitendra Solanki; Norbert Fröhleke; Joachim Böcker; Andreas Averberg; Peter Wallmeier (IECON, 2014)

Co-simulation of an interior permanent magnet synchronous motor with segmented rotor structure. - Christoph Schulte; Joachim Böcker (IECON, 2014)

Real-time capable methods to determine the magnet temperature of permanent magnet synchronous motors - A review. - Oliver Wallscheid; Tobias Huber; Wilhelm Peters; Joachim Böcker (IECON, 2014)

Switching strategy for Direct Model Predictive Control in power converter and drive applications with high switching frequency. - Michael Leuer; Joachim Böcker (ICARA, 2015)

DCM detection for on-line adaption of control parameters for totem-pole PFC rectifier. - Carsten Henkenius; Norbert Fröhleke; Joachim Böcker; Heiko Figge; Tobias Grote (ICIT, 2015)

Self-optimizing Model Predictive Direct Torque Control for electrical drives. - Michael Leuer; Joachim Böcker (ISIE, 2015)

Implementation of Hybrid Filter for 12-Pulse Thyristor Rectifier Supplying High-Current Variable-Voltage DC Load. - Jitendra Solanki; Norbert Fröhleke; Joachim Böcker (IEEE Trans. Ind. Electron., 2015)

Prediction of residual power peaks in industrial microgrids using artificial neural networks. - Thorsten Vogt; Daniel Weber 004; Oliver Wallscheid; Joachim Böcker (IJCNN, 2017)

Investigation of long short-term memory networks to temperature prediction for permanent magnet synchronous motors. - Oliver Wallscheid; Wilhelm Kirchgässner; Joachim Böcker (IJCNN, 2017)

Calorimetric measurements with compensating temperature control. - Sven Bolte; Lukas Keuck; Jehan Khan Afridi; Norbert Fröhleke; Joachim Böcker (ISIE, 2017)

Observing the Permanent-Magnet Temperature of Synchronous Motors Based on Electrical Fundamental Wave Model Quantities. - Oliver Wallscheid; Andreas Specht; Joachim Böcker (IEEE Trans. Ind. Electron., 2017)

Online-Identification of the Machine Parameters of an Induction Motor Drive. - Oleg Buchholz; Joachim Böcker (ISIE, 2018)

Bidirectional Resonant Converter with Integrated Magnetics for On-Board Chargers. - Sven Bolte; Frank Schafmeister; Joachim Böcker (ISIE, 2019)

Empirical Evaluation of Exponentially Weighted Moving Averages for Simple Linear Thermal Modeling of Permanent Magnet Synchronous Machines. - Wilhelm Kirchgässner; Oliver Wallscheid; Joachim Böcker (ISIE, 2019)

Analytical Topology Comparison for a Single Stage On-Board EV-Battery Converter. - Philipp Rehlaender; Frank Schafmeister; Joachim Böcker; Tobias Grote (ISIE, 2019)

Development of a Black-Box Two-Level IGBT Three-Phase Inverter Compensation Scheme for Electrical Drives. - Marius Stender; Oliver Wallscheid; Joachim Böcker (ISIE, 2019)

Stator Flux-Based Field-Oriented Position-Sensorless Control of Permanent Magnet Synchronous Motors With Limited Parameter Knowledge. - Oliver Wallscheid; Muhammad Saad Shafiq; Joachim Böcker (ISIE, 2019)

Data-Driven Recursive Least Squares Estimation for Model Predictive Current Control of Permanent Magnet Synchronous Motors. - Anian Brosch; Sören Hanke; Oliver Wallscheid; Joachim Böcker (CoRR, 2019)

Data-Driven Permanent Magnet Temperature Estimation in Synchronous Motors with Supervised Machine Learning. - Wilhelm Kirchgässner; Oliver Wallscheid; Joachim Böcker (CoRR, 2020)

Data Set Description: Identifying the Physics Behind an Electric Motor - Data-Driven Learning of the Electrical Behavior (Part II). - Sören Hanke; Oliver Wallscheid; Joachim Böcker (CoRR, 2020)

Data Set Description: Identifying the Physics Behind an Electric Motor - Data-Driven Learning of the Electrical Behavior (Part I). - Sören Hanke; Oliver Wallscheid; Joachim Böcker (CoRR, 2020)

Improved Fusion of Permanent Magnet Temperature Estimation Techniques for Synchronous Motors Using a Kalman Filter. - Daniel Efren Gaona Erazo; Oliver Wallscheid; Joachim Böcker (IEEE Trans. Ind. Electron., 2020)

Combined Electrical-Thermal Gray-Box Model and Parameter Identification of an Induction Motor. - Marius Stender; Oliver Wallscheid; Joachim Böcker (IECON, 2021)

Comparison of Gray-Box and Black-Box Two-Level Three-Phase Inverter Models for Electrical Drives. - Marius Stender; Oliver Wallscheid; Joachim Böcker (IEEE Trans. Ind. Electron., 2021)

Torque and Inductances Estimation for Finite Model Predictive Control of Highly Utilized Permanent Magnet Synchronous Motors. - Anian Brosch; Oliver Wallscheid; Joachim Böcker (IEEE Trans. Ind. Informatics, 2021)

Adaptive Operating Strategy for Induction Motors Under Changing Electrical-Thermal Conditions. - Marius Stender; Marius Becker; Oliver Wallscheid; Joachim Böcker (IECON, 2022)

Thermal neural networks: Lumped-parameter thermal modeling with state-space machine learning. - Wilhelm Kirchgässner; Oliver Wallscheid; Joachim Böcker (Eng. Appl. Artif. Intell., 2023)

Run-to-Failure Relay Dataset for Predictive Maintenance Research With Machine Learning. - Fabian Winkel; Johannes Deuse-Kleinsteuber; Joachim Böcker (IEEE Trans. Reliab., 2024)

Reducing Contact Bouncing of a Relay by Optimizing the Switch Signal During Run-Time. - Fabian Winkel; Peter Scholz; Oliver Wallscheid; Joachim Böcker (IEEE Trans Autom. Sci. Eng., 2024)