Simulation of MTTF-Values for a 1oo2 Safety-related System using an Approach with Monte Carlo Method. - Josef Börcsök; Siegbert Hentschke (ESM, 2002)

Principles of Safety Bus System. - Josef Börcsök; Michael H. Schwarz (ICN/ICONS/MCL, 2006)

Different approaches for probability of common cause failure on demand calculations for safety integrity systems. - Josef Börcsök; Peter Holub (AICCSA, 2008)

Implementation of a 1oo2-RISC-architecture on FPGA for safety systems. - Josef Börcsök; Ali Hayek; Muhammad Umar (AICCSA, 2008)

Matlab® / Simulink® generated source code for safety related systems. - Michael H. Schwarz; Huiyun Sheng; Oleksandr Sheleh; Josef Börcsök (AICCSA, 2008)

Redundant optical data transmission using semiconductor lasers. - Hans-Dieter Wacker; Josef Börcsök; Hartmut Hillmer (AICCSA, 2008)

Models to calculate safety and reliability parameters for embedded systems. - Josef Börcsök (ICAT, 2009)

An automated software verification tool for model-based development of embedded systems with simulink®. - Josef Börcsök; Walid Chaaban; Michael H. Schwarz; Huiyun Sheng; Oleksandr Sheleh; Batsuren Batchuluun (ICAT, 2009)

Design and implementation of an IP-core based safety-related communication architecture on FPGA. - Josef Börcsök; Ali Hayek; Bashier Machmur; Muhammad Umar (ICAT, 2009)

Principle software reliability analysis with different failure rate models. - Josef Börcsök; Ossmane Krini (ICAT, 2009)

Advanced PFH calculations for safety integrity systems with high diagnostic. - Peter Holub; Josef Börcsök (ICAT, 2009)

Reliable software development methodology for safety related applications: From simulation to reliable source code. - Michael H. Schwarz; Huiyun Sheng; Batsuren Batchuluun; Oleksandr Sheleh; Walid Chaaban; Josef Börcsök (ICAT, 2009)

Evaluation of sophisticated hardware architectures for safety applications. - Evzudin Ugljesa; Josef Börcsök (ICAT, 2009)

Basic VHDL tests conforming to IEC 61508. - Ali Hayek; Michael Schreiber; Josef Börcsök (INSS, 2010)

Considering and comparing safety parameters - Using different calculation approaches of PFD/PFH/HR. - Josef Börcsök; Peter Holub (ICAT, 2011)

A partially automated HiL test environment for model-based development using Simulink® and OPC technology. - Walid Chaaban; Michael H. Schwarz; Batsuren Batchuluun; Huiyun Sheng; Josef Börcsök (ICAT, 2011)

Towards safe data flow processing by integration of design by contract in deterministic UML activities. - Zamira Daw; Marcus Vetter; Josef Börcsök (ICAT, 2011)

New approach to determine the critical number of failure in software systems. - Ossmane Krini; Josef Börcsök (ICAT, 2011)

Enhancing a simulation environment for computer architecture to a SystemC based testbench tool for design verification. - Mario Westmeier; Benjamin Herwig; Josef Börcsök (ICAT, 2011)

Two-Way-Compiler: Additional Data Saving for Generating the Original Source Code of a Binary Program. - Dennis Obermann; Josef Börcsök (ARCS Workshops, 2012)

New concept to develop a safety sensor network for continuous noninvasive blood pressure monitoring. - Huiyun Sheng; Michael H. Schwarz; Josef Börcsök (ETFA, 2012)

FPGA-based wireless sensor network platform for safety systems. - Ali Hayek; Bashier Machmur; Yusuf Suna; Josef Börcsök (ICT, 2012)

Modeling a safety-related system for continuous non-invasive blood pressure monitoring. - Huiyun Sheng; Michael H. Schwarz; Josef Börcsök (BioCAS, 2013)

A possible approach for determining safety parameters for safety integrated circuits. - Josef Börcsök; Peter Holub (ICAT, 2013)

Tool to derive and calculate safety parameter. - Ossmane Krini; Josef Börcsök (ICAT, 2013)

A survey on OPC and OPC-UA: About the standard, developments and investigations. - Michael H. Schwarz; Josef Börcsök (ICAT, 2013)

Optimization of diagnostics with respect to the diagnostic coverage and the cost function. - Hans-Dieter Wacker; Peter Holub; Josef Börcsök (ICAT, 2013)

Internet-controlled dynamic reconfiguration for FPGA-based embedded systems. - Ali Hayek; Sebastian Domes; Josef Börcsök (ICCIT, 2013)

Evaluation and analysis of an on-chip safety system architecture. - Ali Hayek; Josef Börcsök (SSD, 2014)

HICore1: "Safety on a chip" turnkey solution for industrial control. - Ali Hayek; Bashier Machmur; Michael Schreiber; Josef Börcsök; Stefan Golz; Mario Epp (ASAP, 2014)

Network-based safety-related vibration and position analysis for railway vehicles. - Samer Telawi; Yusuf Sima; Bashier Machmur; Ali Hayek; Josef Börcsök; Udo Pinders; Walter Schreiber (ICCVE, 2014)

Embedded safety on a chip for SIL3 applications. - Ali Hayek; Bashier Machmur; Michael Schreiber; Josef Börcsök (ICM, 2014)

Miniaturized safety systems: A way for future tasks in safety engineering. - Josef Börcsök (ICAT, 2015)

Contribution to reducing the critical faults in critical Software Systems. - Jamal Krini; Josef Börcsök (ICAT, 2015)

New contribution to the analysis of stochastic processes for critical systems to increase reliability. - Ossmane Krini; Jamal Krini; Abderrahim Krini; Josef Börcsök (ICAT, 2015)

Investigation of a reliability prevention model for remanufactured systems in automotive. - Abderrahim Krini; Jamal Krini; Ossmane Krini; Josef Börcsök (ICAT, 2015)

CAN open safety on safety-related system-on-chip. - Hamid Rahmani; Karolin Löser; Richard Thum; Ali Hayek; Josef Börcsök (ICAT, 2015)

Error detection on precise laser scanner based navigation. - Richard Thum; Josef Börcsök (ICAT, 2015)

Design and testing tool for a safe monitoring system for neurodegenerative disorder patients. - Nashaat El Halabi; Roger Achkar; Roy Abi Zeid Daou; Ali Hayek; Josef Börcsök (ACTEA, 2016)

Minaturized Safety PLC on a Chip for Industrial Control Applications. - Ali Hayek; Josef Börcsök (DCAI, 2016)

Adoption of Miniaturized Safety-Related Systems for Industrial Internet-of-Things Applications. - Ali Hayek; Samer Telawi; Christian Bieler; Josef Börcsök (InterIoT/SaSeIoT, 2016)

Extended approach to selecting a project-specific reliability growth model. - Jamal Krini; Abderrahim Krini; Ossmane Krini; Josef Börcsök (MIPRO, 2016)

Hardness Analysis and Instrumentation of Verilog Gate Level Code for FPGA-based Designs. - Abdul Rafay Khatri; Ali Hayek; Josef Börcsök (ARC, 2017)

Evaluation of FPGA design tools for safety systems with on-chip redundancy referring to the standard IEC 61508. - Emil Gracie; Ali Hayek; Josef Börcsök (ICSRS, 2017)

Validation of selecting SP-values for fault models under proposed RASP-FIT tool. - Abdul Rafay Khatri; Ali Hayek; Josef Börcsök (INTELLECT, 2017)

Smart Wearable System for Safety-Related Industrial IoT Applications. - Ali Hayek; Samer Telawi; Johannes Klos; Josef Börcsök; Roy Abi Zeid Daou (InterIoT/SaSeIoT, 2017)

Safety-Related Wireless Communication via RF Modules for Industrial IoT Applications. - Samer Telawi; Ali Hayek; Josef Börcsök (InterIoT/SaSeIoT, 2017)

Adapting Raspberry Pi to Miniaturized Safety Systems for Industry 4.0 Control Applications. - Sebastian Domes; Johannes Klos; Ali Hayek; Josef Börcsök (SSD, 2018)

Validation of the Proposed Fault Injection, Test and Hardness Analysis for Combinational Data-Flow Verilog HDL Designs Under the RASP-FIT Tool. - Abdul Rafay Khatri; Ali Hayek; Josef Börcsök (DASC/PiCom/DataCom/CyberSciTech, 2018)

FPGA Implementation of a Safety System-on-Chip Based on 1oo4 Architecture Using LEON3 Processor. - Mohamed Abdelawwad; Ali Hayek; Ahmed Alsuleiman; Josef Börcsök (ICCA, 2018)

Enhanced V-Model. - Mustafa Seçkin Durmus; Ilker Üstoglu; Roman Yu. Tsarev; Josef Börcsök (Informatica (Slovenia), 2018)

Monitoring System for Prediction and Detection of Epilepsy Seizure. - Nashaat El Halabi; Roy Abi Zeid Daou; Roger Achkar; Ali Hayek; Josef Börcsök (ACTEA, 2019)

Design and Implementation of Smart Shoes for Blind and Visually Impaired People for More Secure Movements. - Roy Abi Zeid Daou; Jeffrey Chehade; Georgio Abou Haydar; Ali Hayek; Josef Börcsök; José Javier Serrano Olmedo (ICM, 2020)

Communication SoC based on 1oo2D architecture for industrial human-robot-collaboration. - Mohamed Abdelawwad; Malte Drabesch; Michael Schwarz; Muhammad Ikram Hafiz; Josef Börcsök (SSD, 2021)

Safe-System-on-Chip for Functional Safety. - Josef Börcsök; Waldemar Müller; Eike Hahn; Michael Schwarz; Mohamed Abdelawwad (SSD, 2021)

Design and Implementation of a Safe Medical Box to Maintain Insulin Pens in Good Conditions. - Roy Abi Zeid Daou; Elie Boutros; Tony Youssef; Ali Hayek; Josef Börcsök; José Javier Serrano Olmedo (SSD, 2021)

SoC approach for low cost and low power consumption based on ARM Cortex M3 according to ISO 26262. - Muhammad Ikram Hafiz; Mohamed Abdelawwad; Waldemar Müller; Eike Hahn; Josef Börcsök (SSD, 2021)

Enhancement of Reliability and Precision of Navigation by Odometry. - Richard Thum; Josef Börcsök (SSD, 2021)

Efficiency Measurement of Compressed Air Compressors Using High Availability SoC with 1oo2 Redundancy Architecture. - Mohamed Abdelawwad; Eike Hahn; Josef Börcsök; Julian Fairbrother; Tarek Al Shahadat; Peter Otto (CECNet, 2021)

RISC-V Based Safety System-on-Chip with Hardware Comparator. - Eike Hahn; Dominik Kalinowski; Waldemar Müller; Mohamed Abdelawwad; Josef Börcsök (CECNet, 2021)

Securing an IoT Medical System Using AI and a Unidirectional Network Device: Application to a Driver. - Georges El Hajal; Roy Abi Zeid Daou; Yves Ducq; Josef Börcsök (CECNet, 2021)

Development of a Safe Charging Infrastructure System: Requirements, Design, Verification and Validation. - Tommi Kivelä; Marvin Sperling; Mohamed Abdelawwad; Malte Drabesch; Michael Schwarz; Josef Börcsök; Kai Furmans (SMARTGREENS/VEHITS (Selected Papers), 2021)

Functional Safety and Electric Vehicle Charging: Requirements Analysis and Design for a Safe Charging Infrastructure System. - Tommi Kivelä; Mohamed Abdelawwad; Marvin Sperling; Malte Drabesch; Michael Schwarz; Josef Börcsök; Kai Furmans (VEHITS, 2021)

Safe Detection of Wheels Spinning and Sliding in Vehicles. - Samer Telawi; Ali Hayek; Josef Börcsök (IEEE Trans. Veh. Technol., 2022)

Design and Implementation of a QoL Improvement System for Visually Impaired Patients. - Roy Abi Zeid Daou; Jad Beaino; Johnny Hawat; Ramy Ibrahim; Ali Hayek; Josef Börcsök; José Javier Serrano Olmedo (ACTEA, 2023)

Machine Learning Model for Predicting Failures in the Context of Autonomous Vehicles. - Abderrahim Krini; Aymen Ouertani; Josef Börcsök (ICSRS, 2023)

A Practical Approach for Reliability Prediction of Safety Critical Software Using Multi-Model Ensemble Techniques. - Aymen Ouertani; Ossmane Krini; Josef Börcsök (ICSRS, 2023)

Concept of an Optical Distance and Speed Sensor Using Novel Offsetless Spatial Frequency Filters in the Area of Functional Safety. - Frank Wasinski; Werner Bonath; Ubbo Ricklefs; Josef Börcsök; Michael Schwarz; Eike Hahn (ISIE, 2023)

A new extremely ultrathin metasurface energy harvester and its simple modelling based on resonant half-wave dipole antenna. - Alireza Ghaneizadeh; Mojtaba Joodaki; Josef Börcsök; Khalil Mafinezhad (CoRR, 2024)

Towards Functional Safety in Dynamic Distributed Systems. - Dirk Dahlhaus; Ingrid Moerman; Nour Mansour; Jeroen Hoebeke; Xianjun Jiao; Jetmir Haxhibeqiri; Josef Börcsök (J. Mobile Multimedia, 2024)

Study of an OPTO-ASIC for a Functionally Safe Speed Sensor Using the Spatial Frequency Filter Method. - Frank Wasinski; Werner Bonath; Ubbo Ricklefs; Michael Schwarz; Josef Börcsök (DDECS, 2025)