An integration design optimization framework of robust design, axiomatic design, and reliability-based design. - Lijuan Shen; Jun Yang 018; Yu Zhao 003 (Qual. Reliab. Eng. Int., 2011)

Simultaneous Optimization of Robust Parameter and Tolerance Design Based on Generalized Linear Models. - Lijuan Shen; Jun Yang 018; Yu Zhao 003 (Qual. Reliab. Eng. Int., 2013)

Generalized moment-independent importance measures based on Minkowski distance. - Qingqing Zhai; Jun Yang 018; Min Xie 001; Yu Zhao 003 (Eur. J. Oper. Res., 2014)

Reliability of demand-based phased-mission systems subject to fault level coverage. - Rui Peng 001; Qingqing Zhai; Liudong Xing; Jun Yang 018 (Reliab. Eng. Syst. Saf., 2014)

Space-partition method for the variance-based sensitivity analysis: Optimal partition scheme and comparative study. - Qingqing Zhai; Jun Yang 018; Yu Zhao 003 (Reliab. Eng. Syst. Saf., 2014)

Process Capability Indices Based on the Highest Density Interval. - Jun Yang 018; Tingting Gang; Yuan Cheng; Min Xie 001 (Qual. Reliab. Eng. Int., 2015)

Multi-Valued Decision Diagram-Based Reliability Analysis of k-out-of-n Cold Standby Systems Subject to Scheduled Backups. - Qingqing Zhai; Liudong Xing; Rui Peng 001; Jun Yang 018 (IEEE Trans. Reliab., 2015)

Two Inverse Normalizing Transformation methods for the process capability analysis of non-normal process data. - Hao Wang; Jun Yang 018; Songhua Hao (Comput. Ind. Eng., 2016)

Design of Gamma Charts Based on Average Time to Signal. - Jun Yang 018; Huan Yu; Yuan Cheng; Min Xie 001 (Qual. Reliab. Eng. Int., 2016)

Reliability evaluation of linear multi-state consecutively-connected systems constrained by m consecutive and n total gaps. - Huan Yu; Jun Yang 018; Rui Peng 001; Yu Zhao 003 (Reliab. Eng. Syst. Saf., 2016)

Measurement errors in degradation-based burn-in. - Qingqing Zhai; Zhi-Sheng Ye 001; Jun Yang 018; Yu Zhao 003 (Reliab. Eng. Syst. Saf., 2016)

Reliability evaluation of non-repairable phased-mission common bus systems with common cause failures. - Huan Yu; Jun Yang 018; Jing Lin 003; Yu Zhao 003 (Comput. Ind. Eng., 2017)

A Study of Control Chart for Monitoring Exponentially Distributed Characteristics Based On Type-II Censored Samples. - Shuo Huang; Jun Yang 018; Min Xie 001 (Qual. Reliab. Eng. Int., 2017)

Designing adaptive accelerated life tests using Bayesian methods. - Shihu Xiang; Jun Yang 018; Lijuan Shen (Qual. Reliab. Eng. Int., 2017)

Research on Sampling Method of CFSFDP Clustering Algorithm and Its Criteria for Determining the Best Sample Size. - Chen Cheng; Jun Yang 018; Xuefeng Kong (ICAAI, 2018)

Reliability-based Usage Strategy Optimization for Lifetime Maximization of Solid-state Lasers. - Xuefeng Kong; Jun Yang 018; Xiaolu Fu (ICPHM, 2018)

A Novel Quality Requirement Design Method for the Quality Characteristic of Rubber Products Based on the Reliability Constraint. - Songhua Hao; Jun Yang 018 (IEEE Access, 2018)

Reliability analysis for dependent competing failure processes with changing degradation rate and hard failure threshold levels. - Songhua Hao; Jun Yang 018 (Comput. Ind. Eng., 2018)

Distribution-free EWMA schemes for simultaneous monitoring of time between events and event magnitude. - Shuo Huang; Jun Yang 018; Amitava Mukherjee 002 (Comput. Ind. Eng., 2018)

Two CUSUM schemes for simultaneous monitoring of parameters of a shifted exponential time to events. - Shuo Huang; Amitava Mukherjee 002; Jun Yang 018 (Qual. Reliab. Eng. Int., 2018)

Nonlinear step-stress accelerated degradation modelling considering three sources of variability. - Songhua Hao; Jun Yang 018; Christophe Bérenguer (Reliab. Eng. Syst. Saf., 2018)

Performance reliability evaluation for mobile ad hoc networks. - Shihu Xiang; Jun Yang 018 (Reliab. Eng. Syst. Saf., 2018)

Aggregated combinatorial reliability model for non-repairable parallel phased-mission systems. - Qingqing Zhai; Liudong Xing; Rui Peng 001; Jun Yang 018 (Reliab. Eng. Syst. Saf., 2018)

Remaining Useful Life Prediction of Rolling Bearings Based on RMS-MAVE and Dynamic Exponential Regression Model. - Xuefeng Kong; Jun Yang 018 (IEEE Access, 2019)

An Adaptive Use Strategy for Solid-State Lasers by Combining Maximum Likelihood Estimation With Model Predictive Control. - Shihu Xiang; Jun Yang 018 (IEEE Access, 2019)

Degradation analysis based on an extended inverse Gaussian process model with skew-normal random effects and measurement errors. - Songhua Hao; Jun Yang 018; Christophe Bérenguer (Reliab. Eng. Syst. Saf., 2019)

An ARIMA Model With Adaptive Orders for Predicting Blood Glucose Concentrations and Hypoglycemia. - Jun Yang 018; Lei Li 017; Yimeng Shi; Xiaolei Xie (IEEE J. Biomed. Health Informatics, 2019)

Dependent Competing Failure Modeling for the GIL Subject to Partial Discharge and Air Leakage With Random Degradation Initiation Time. - Songhua Hao; Jun Yang 018 (IEEE Trans. Reliab., 2019)

The continuous maximal covering location problem in large-scale natural disaster rescue scenes. - Pei Yang 003; Yiyong Xiao; Yue Zhang; Shenghan Zhou; Jun Yang 018; Yuchun Xu (Comput. Ind. Eng., 2020)

Process capability analysis for manufacturing processes based on the truncated data from supplier products. - Jun Yang 018; Fanbing Meng; Shuo Huang; Yanhe Cui (Int. J. Prod. Res., 2020)

Reliability assessment of multi-state phased mission systems with common bus performance sharing considering transmission loss and performance storage. - Chen Cheng; Jun Yang 018; Lei Li 017 (Reliab. Eng. Syst. Saf., 2020)

Reliability analysis of composite insulators subject to multiple dependent competing failure processes with shock duration and shock damage self-recovery. - Xuefeng Kong; Jun Yang 018 (Reliab. Eng. Syst. Saf., 2020)

Reliability Evaluation and Reliability-Based Optimal Design for Wireless Sensor Networks. - Shihu Xiang; Jun Yang 018 (IEEE Syst. J., 2020)

Performance comparisons of distribution-free Shewhart-type Lepage and Cucconi schemes in monitoring complex process distributions. - Zhi Lin Chong; Shuo Huang; Amitava Mukherjee 002; Jun Yang 018 (Trans. Inst. Meas. Control, 2020)

k-Terminal Reliability of Ad Hoc Networks Considering the Impacts of Node Failures and Interference. - Shihu Xiang; Jun Yang 018 (IEEE Trans. Reliab., 2020)

A predictive model incorporating the change detection and Winsorization methods for alerting hypoglycemia and hyperglycemia. - Lei Li 017; Xiaolei Xie; Jun Yang 018 (Medical Biol. Eng. Comput., 2021)

Hypothesis testing of process capability index C p k from the perspective of generalized fiducial inference. - Fanbing Meng; Jun Yang 018; Shuo Huang (Qual. Reliab. Eng. Int., 2021)

Planning constant-stress accelerated life tests with multiple stresses based on D-optimal design. - Xiangxiang Zhang; Jun Yang 018; Xuefeng Kong (Qual. Reliab. Eng. Int., 2021)

Reliability evaluation of a k-out-of-n(G)-subsystem based multi-state phased mission system with common bus performance sharing subjected to common cause failures. - Chen Cheng; Jun Yang 018; Lei Li 017 (Reliab. Eng. Syst. Saf., 2021)

Reliability modeling-based tolerance design and process parameter analysis considering performance degradation. - Xuefeng Kong; Jun Yang 018; Songhua Hao (Reliab. Eng. Syst. Saf., 2021)

Optimal design of facility allocation and maintenance strategy for a cellular network. - Shengna Wu; Jun Yang 018; Rui Peng 001; Qingqing Zhai (Reliab. Eng. Syst. Saf., 2021)

Reliability analysis of products based on proportional hazard model with degradation trend and environmental factor. - Huiling Zheng; Xuefeng Kong; Houbao Xu; Jun Yang 018 (Reliab. Eng. Syst. Saf., 2021)

Generally weighted moving average control chart for monitoring two-parameter exponential distribution with measurement errors. - Qi Li; Jun Yang 018; Shuo Huang; Yu Zhao 003 (Comput. Ind. Eng., 2022)

A fake review identification framework considering the suspicion degree of reviews with time burst characteristics. - Ning Wang 002; Jun Yang 018; Xuefeng Kong; Ying Gao (Expert Syst. Appl., 2022)

Discriminative transfer feature learning based on robust-centers. - Lei Li 017; Jun Yang 018; Xuefeng Kong; Yulin Ma (Neurocomputing, 2022)

Collaborative and adversarial deep transfer auto-encoder for intelligent fault diagnosis. - Yulin Ma; Jun Yang 018; Lei Li 017 (Neurocomputing, 2022)

Unsupervised domain adaptation via discriminative feature learning and classifier adaptation from center-based distances. - Lei Li 017; Jun Yang 018; Xuefeng Kong; Jianchun Zhang; Yulin Ma (Knowl. Based Syst., 2022)

Multi-mission selective maintenance and repairpersons assignment problem with stochastic durations. - Lujie Liu; Jun Yang 018; Xuefeng Kong; Yiyong Xiao (Reliab. Eng. Syst. Saf., 2022)

Convolutional kernel aggregated domain adaptation for intelligent fault diagnosis with label noise. - Yulin Ma; Lei Li 017; Jun Yang 018 (Reliab. Eng. Syst. Saf., 2022)

Robustness evaluation of the air cargo network considering node importance and attack cost. - Ning Wang 002; Ying Gao; Jia-tao He; Jun Yang 018 (Reliab. Eng. Syst. Saf., 2022)

Reliability Assessment of Multi-State Phased Mission Systems With Common Bus Performance Sharing Subjected to Epistemic Uncertainty. - Chen Cheng; Jun Yang 018; Lei Li 017 (IEEE Trans. Reliab., 2022)

Meta Bi-classifier Gradient Discrepancy for noisy and universal domain adaptation in intelligent fault diagnosis. - Yulin Ma; Jun Yang 018; Lei Li 017 (Knowl. Based Syst., 2023)

Reliability acceptance sampling plan for degraded products subject to Wiener process with unit heterogeneity. - Huiling Zheng; Jun Yang 018; Houbao Xu; Yu Zhao 003 (Reliab. Eng. Syst. Saf., 2023)

Transfer Learning Using Cluster Centers for Surface Defect Identification of Piston Rods in Pneumatic Cylinders. - Yan Shi 003; Lei Li 017; Jun Yang 018; Na Wang; Changhui Wang; Yixuan Wang 002 (IEEE Trans. Instrum. Meas., 2023)

Pseudo-labeling Integrating Centers and Samples with Consistent Selection Mechanism for Unsupervised Domain Adaptation. - Lei Li 017; Jun Yang 018; Yulin Ma; Xuefeng Kong (Inf. Sci., 2023)

Availability for multi-component k-out-of-n: G warm-standby system in series with shut-off rule of suspended animation. - Linhan Guo; Ruiyang Li; Yu Wang 149; Jun Yang 018; Yu Liu; Yiming Chen; Jianguo Zhang (Reliab. Eng. Syst. Saf., 2023)

Reliability assessment of performance-based balanced systems with rebalancing mechanisms. - Tianzi Tian; Jun Yang 018; Lei Li 017; Ning Wang 002 (Reliab. Eng. Syst. Saf., 2023)

Optimal design of reliability acceptance sampling plan based on constant-stress accelerated life testing considering the uncertainty of accelerated factor. - Yifan Lou; Huiling Zheng; Jun Yang 018 (Qual. Reliab. Eng. Int., 2023)

A dynamic mission abort policy for the swarm executing missions and its solution method by tailored deep reinforcement learning. - Lujie Liu; Jun Yang 018 (Reliab. Eng. Syst. Saf., 2023)

A novel adaptive deployment method for the single-target tracking of mobile wireless sensor networks. - Shihu Xiang; Jun Yang 018 (Reliab. Eng. Syst. Saf., 2023)

Timely reliability modeling and evaluation of wireless sensor networks with adaptive N-policy sleep scheduling. - Changzhen Zhang; Jun Yang 018; Ning Wang 002 (Reliab. Eng. Syst. Saf., 2023)

The optimal 5G base station location of the wireless sensor network considering timely reliability. - Ning Wang 002; Yiyong Xiao; Tianzi Tian; Jun Yang 018 (Reliab. Eng. Syst. Saf., 2023)

A power model considering initial battery state for remaining useful life prediction of lithium-ion batteries. - Fanbing Meng; Fangfang Yang; Jun Yang 018; Min Xie 001 (Reliab. Eng. Syst. Saf., 2023)

Dynamic operations and maintenance of an unmanned aerial vehicle swarm for continuous emergency communication. - Lujie Liu; Jun Yang 018 (Comput. Ind. Eng., 2023)

Process capability analysis of Taguchi index Cpm based on generalized p-value. - Fanbing Meng; Jun Yang 018 (Qual. Reliab. Eng. Int., 2023)

Gradient aligned domain generalization with a mutual teaching teacher-student network for intelligent fault diagnosis. - Yulin Ma; Jun Yang 018; Lei Li 017 (Reliab. Eng. Syst. Saf., 2023)

Selective maintenance of multi-state systems with the repairperson fatigue effect and stochastic break duration. - Lujie Liu; Yiyong Xiao; Jun Yang 018; Yaonan Ding (Qual. Reliab. Eng. Int., 2023)

A highly accelerated stress reliability growth test method. - Hao Xing; Jun Yang 018 (Qual. Reliab. Eng. Int., 2023)

Reliability demonstration test plan for degraded products subject to Gamma process with unit heterogeneity. - Huiling Zheng; Jun Yang 018; Yu Zhao 003 (Reliab. Eng. Syst. Saf., 2023)

Sharpness-Aware Gradient Alignment for Domain Generalization With Noisy Labels in Intelligent Fault Diagnosis. - Yulin Ma; Jun Yang 018; Ruqiang Yan 001 (IEEE Trans. Instrum. Meas., 2024)

An Energy-Efficient Collaborative Offloading Scheme With Heterogeneous Tasks for Satellite Edge Computing. - Changzhen Zhang; Jun Yang 018 (IEEE Trans. Netw. Sci. Eng., 2024)

A dynamic mission abort policy for transportation systems with stochastic dependence by deep reinforcement learning. - Lujie Liu; Jun Yang 018; Bingxin Yan (Reliab. Eng. Syst. Saf., 2024)

Reliability assessment of two-level balanced systems with common bus performance sharing subjected to epistemic uncertainty. - Tianzi Tian; Jun Yang 018; Ning Wang 002 (Qual. Reliab. Eng. Int., 2024)

Transmission reliability evaluation of the wireless mobile ad hoc network considering the routing protocol and randomness of channel capacity. - Ning Wang 002; Jia-tao He; Shihu Xiang; Jun Yang 018 (Qual. Reliab. Eng. Int., 2024)

Transmission reliability evaluation of wireless sensor networks considering channel capacity randomness and energy consumption failure. - Ning Wang 002; Tianzi Tian; Jia-tao He; Changzhen Zhang; Jun Yang 018 (Reliab. Eng. Syst. Saf., 2024)

Reliability analysis of a two-dimensional linear consecutive-(r,s)-out-of-(m,n): F repairable system. - Changzhen Zhang; Jun Yang 018; Mingjia Li 004; Ning Wang 002 (Reliab. Eng. Syst. Saf., 2024)

Statistical Modeling and Reliability Analysis for Degradation Processes Indexed by Two Scales. - Qingqing Zhai; Ancha Xu; Jun Yang 018; Yijing Zhou (IEEE Trans. Ind. Informatics, 2024)

An active queue management for wireless sensor networks with priority scheduling strategy. - Changzhen Zhang; Jun Yang 018; Ning Wang 002 (J. Parallel Distributed Comput., 2024)

Reliability evaluation for Weibull distribution with heavily Type II censored data. - Mengyu Liu; Huiling Zheng; Jun Yang 018 (Qual. Reliab. Eng. Int., 2024)

Joint Multimission Selective Maintenance and Inventory Optimization for Multicomponent Systems Considering Stochastic Dependency. - Xuefeng Kong; Jun Yang 018; Wenhua Chen 003; Jun Pan (IEEE Trans. Reliab., 2024)

Multi-Tree Genetic Programming with Elite Recombination for dynamic task scheduling of satellite edge computing. - Changzhen Zhang; Jun Yang 018 (Future Gener. Comput. Syst., 2025)

Accelerated Degradation Data Analysis Based on Gamma Process With Random Effects. - Huiling Zheng; Jun Yang 018; Wenda Kang; Yu Zhao 003 (Qual. Reliab. Eng. Int., 2025)

A dynamic multi-task selective execution policy considering stochastic dependence between degradation and random shocks by deep reinforcement learning. - Lujie Liu; Jun Yang 018; Huiling Zheng; Lei Li 017; Ning Wang 002 (Reliab. Eng. Syst. Saf., 2025)

A Mimic-Filling Algorithm for Pairwise Model Discrimination of Censoring Lifetime Data. - Fanbing Meng; Jun Yang 018; Min Xie 001 (IEEE Trans. Reliab., 2025)

Availability Evaluation and Maintenance Optimization of Balanced Systems Considering State-Dependent Inspection Intervals. - Tianzi Tian; Ning Wang 002; Jun Yang 018; Zhuqing Miao; Lei Li 017 (IEEE Trans. Reliab., 2025)

Multitree Genetic Programming With Rule Reconstruction for Dynamic Task Scheduling in Integrated Cloud-Edge Satellite-Terrestrial Networks. - Changzhen Zhang; Jun Yang 018; Ning Wang 002 (IEEE Internet Things J., 2025)