Video Monitoring of Slope Failure Using Spatiotemporal Gabor Filtering. - Ken Okamoto; Toshio Watanabe; Akitoshi Hanazawa; Takashi Morie; Hiroshi Ban; Yuji Maeda (SMC, 2009)

Performance Estimation of Generalized Statistical Smoothing to Inverse Halftoning Based on the MTF Function of Human Eyes. - Yohei Saika; Kouki Sugimoto; Ken Okamoto (ICA3PP (2), 2010)

Performance of generalized statistical smoothing to inverse halftoning due to human vision system. - Yohei Saika; Ken Okamoto (ICIS, 2011)

Experimental Evaluation of Coexistence Method for ZigBee under WLAN Interference. - Ryosuke Murata; Masakatsu Ogawa; Jyunya Fukuzawa; Ken Okamoto; Yuichiro Okugawa; Kazuhiro Takaya (J. Commun., 2015)

Conducted Noise Measuring System Using Floating Voltage Measurement Equipment. - Naruto Arai; Ken Okamoto; Jun Kato 005 (I2MTC, 2020)

Method of Measuring Conducted Noise Voltage with a Floating Measurement System to Ground. - Naruto Arai; Ken Okamoto; Jun Kato 005; Yoshiharu Akiyama (IEICE Trans. Commun., 2020)

Conducted Noise Voltage Measurement Using Shoe-shaped Wearable Devices in a Raised-floor Office Room. - Naruto Arai; Toshihisa Masuda; Masato Maruyama; Jun Kato 005; Ken Okamoto; Ken Sasaki (I2MTC, 2021)

Tool Path Generation for Five-Axis Controlled Machining of Free-Form Surfaces Using a Barrel Tool Considering Continuity of Tool Postures. - Tomonobu Suzuki; Ken Okamoto; Koichi Morishige (Int. J. Autom. Technol., 2021)

Unsymmetric Voltage of Conducted Noise Measurement System Without Grounding by Estimation of Ground Capacitance. - Naruto Arai; Yohei Toriumi; Ken Okamoto; Jun Kato 005; Yoshiharu Akiyama; Ken Sasaki (IEEE Trans. Instrum. Meas., 2021)

C-Space-Based Toolpath Generation for Five-Axis Controlled Machining with Special Tools. - Ken Okamoto; Koichi Morishige (Int. J. Autom. Technol., 2024)