Tool Posture Planning Method for Continuous 5-Axis Control Machining on Machine Tool Coordinate System to Optimize Motion of Translational Axes. - Jun'ichi Kaneko; Kenichiro Horio (Int. J. Autom. Technol., 2011)

Tool Posture Planning Method for Continuous Multi Axis Control Machining with Consideration of Shortening Shank Length of End Mill. - Jun'ichi Kaneko; Kenichiro Horio (Int. J. Autom. Technol., 2012)

Workpiece Fixture Planning Method for Continuous Multi-Axis Machining with Consideration of Motion on Translational Axis. - Jun'ichi Kaneko; Kenichiro Horio (Int. J. Autom. Technol., 2012)

Fast Cutter Workpiece Engagement Estimation Method for Prediction of Instantaneous Cutting Force in Continuous Multi-Axis Controlled Machining. - Jun'ichi Kaneko; Kenichiro Horio (Int. J. Autom. Technol., 2013)

Fast Estimation Method of Machinable Area of Workpiece Surface for 3+2-Axis Control Machining Using Graphics Device - Visualization Algorithm of Machinable Area and Minimum Shank Length with Texture Projection Technique -. - Jun'ichi Kaneko; Yuki Yamauchi; Kenichiro Horio (Int. J. Autom. Technol., 2014)

Configuration Method of Fixing System with 2-Dimensionally Low-Frequency Vibration for Drilling to Decrease Influence from Unintended Displacement of Workpiece. - Ivan Burdukovskyi; Jun'ichi Kaneko; Kenichiro Horio (Int. J. Autom. Technol., 2015)

Method of Planning Tool Postures for Deep Groove Machining of Complex Shapes - Development of an Automatic Planning Method that Considers the Motions of the Rotational Axis when the Tool Reverses Direction in Grooved Shapes -. - Kohei Ichikawa; Jun'ichi Kaneko; Masanobu Hasegawa; Takayuki Iwasaki; Kenichiro Horio (Int. J. Autom. Technol., 2017)

Estimation Method of Machining Error on Low Rigidity Workpiece for Tool Posture Planning. - Kohei Ichikawa; Hironobu Saito; Jun'ichi Kaneko; Yuki Okuma; Kenichiro Horio (Int. J. Autom. Technol., 2017)

Development of High-Speed Processing Method to Evaluate Elastic Deformations of Workpieces. - Kenji Komiya; Jun'ichi Kaneko; Tetsuya Yokoyama; Tetsuya Asano; Chiharu Higashino; Kenichiro Horio (Int. J. Autom. Technol., 2017)

Development of Tool Collision Avoidance Method Adapted to Uncut Workpiece Shape. - Kento Watanabe; Jun'ichi Kaneko; Kenichiro Horio (Int. J. Autom. Technol., 2017)

Accurate Tool Path Generation Method for Large-Scale Discrete Shapes. - Hiromu Kitahara; Jun'ichi Kaneko; Masahiro Ajisaka; Takeyuki Abe; Kenichiro Horio (Int. J. Autom. Technol., 2019)

Developing a Support System for Loading Planning. - Takayuki Nakamura; Jun'ichi Kaneko; Takeyuki Abe; Kenichiro Horio (Int. J. Autom. Technol., 2019)

Development of Tool Shape Estimation Method Integrating Multidirectional Optical Measurement. - Mayumi Kaneko; Takahiro Kaminaga; Jun'ichi Kaneko; Kiyohiko Katano; Takeyuki Abe; Kenichiro Horio (Int. J. Autom. Technol., 2020)

Development of Scanning Line Tool Path Generation Algorithm Using Boundary Position Information of Approximate Polyhedron of Complex Molds. - Yuki Saito; Jun'ichi Kaneko; Takeyuki Abe; Kenichiro Horio (Int. J. Autom. Technol., 2020)