Advanced Nonlinear Modelling Techniques for Switched Reluctance Machines. - Frederik D'hulster; Kurt Stockman; Jan Desmet; Ronnie Belmans (Modelling, Simulation, and Optimization, 2003)

ISO Efficiency Curves of a -Two-Phase Hybrid Stepping Motor. - Stijn Derammelaere; Bram Vervisch; Johannes Cottyn; Bart Vanwalleghem; Kurt Stockman; Frederik De Belie; Lieven Vandevelde; Peter Cox; Griet Van den Abeele (IAS, 2010)

Open loop control of a stepping motor with step loss detection and stall detection using back-EMF based load angle estimation. - Stijn Derammelaere; Florian Verbelen; Kurt Stockman (AIM, 2014)

Energy efficiency measurement procedure for gearboxes in their entire operating range. - Stijn Derammelaere; Steve Dereyne; Pieter Defreyne; Elewijn Algoet; Florian Verbelen; Kurt Stockman (IAS, 2014)

Online Identification of a Mechanical System in Frequency Domain Using Sliding DFT. - Niko Nevaranta; Stijn Derammelaere; Jukka Parkkinen; Bram Vervisch; Tuomo Lindh; Kurt Stockman; Markku Niemela; Veli-Pekka Pyrhonen; Juha Pyrhönen (IEEE Trans. Ind. Electron., 2016)

Co-design of controller and setup configuration using Genetic Algorithm. - Michiel Haemers; Stijn Derammelaere; Kurt Stockman (ETFA, 2017)

CAD Enabled Trajectory optimization and Accurate Motion Control for Repetitive Tasks. - Nick Van Oosterwyck; Foeke Vanbecelaere; Michiel Haemers; David Ceulemans; Kurt Stockman; Stijn Derammelaere (ICCA, 2019)

Identification of Dynamic Systems with Position Dependent Load Parameters. - Foeke Vanbecelaere; Stijn Derammelaere; Jos Knockaert; Kurt Stockman; Michael Monte (ICCMA, 2019)

Automatic tuning of predictive control in a hydrostatic drive train system in nominal operation. - Clara M. Ionescu; Michiel Haemers; Anca Maxim; Cosmin Copot; Stijn Derammelaere; Kurt Stockman (ICSTCC, 2019)

A Multi-Channel Temperature Monitoring System for Inverter-Fed Electrical Machines. - Pieter Nguyen Phuc; Dimitar V. Bozalakov; Hendrik Vansompel; Kurt Stockman; Guillaume Crevecoeur (IECON, 2019)

Realtime locomotion control of a snakeboard robot based on a novel model, enabling better physical insights. - Stijn Derammelaere; Cosmin Copot; Michiel Haemers; Florian Verbelen; Bram Vervisch; Clara M. Ionescu; Kurt Stockman (Eur. J. Control, 2019)

Sizing Methodology Based on Scaling Laws for a Permanent Magnet Electrical Variable Transmission. - Florian Verbelen; Ahmed Abdallh; Hendrik Vansompel; Kurt Stockman; Peter Sergeant (IEEE Trans. Ind. Electron., 2020)

Modelling Non-Linear Dynamic Disturbances in a Linear Track Positioning System. - Rémy Carlier; Jeroen D. M. De Kooning; Kurt Stockman (AIM, 2021)

Drivetrain Torque Ripple Reduction With a Modular Motor Architecture. - David van Os; Hendrik Vansompel; Jelle De Decker; Peter Sergeant; Thomas Vandenhove; Stephan Schlimpert; Kurt Stockman (AIM, 2021)

Drivetrain Architectures for a Mechanically Decoupled Contra-Rotating Reversible Pump-Turbine. - Daan P. K. Truijen; Jeroen D. M. De Kooning; Kurt Stockman (AIM, 2021)

On-line Estimation of the Mechanical Stiffness of Rod Mechanisms. - Foeke Vanbecelaere; Kurt Stockman; Michael Monte (ICCMA, 2021)

Modular Drivetrains for Increased Performance and Reliability. - Thomas Vandenhove; Reginald Diltoer; Bert Lenaerts; David van Os; Kurt Stockman; Stephan Schlimpert (ICM, 2021)

Beamforming Applied to Ultrasound Analysis in Detection of Bearing Defects. - Thomas Verellen; Florian Verbelen; Kurt Stockman; Jan Steckel (Sensors, 2021)

Identification of Dynamic Behaviour in a Modular Drivetrain. - David van Os; Hendrik Vansompel; Peter Sergeant; Koen Laurijssen; Niels Divens; Kurt Stockman (ICCMA, 2022)

Energy Optimal Point-to-Point Motion Profile Optimization. - Nick Van Oosterwyck; Foeke Vanbecelaere; Ferre Knaepkens; Michael Monte; Kurt Stockman; Annie Cuyt; Stijn Derammelaere (CoRR, 2022)

Self-learning current optimizing control for conventional stepping motor drive technique based on step pulses. - Jasper De Viaene; David Ceulemans; Stijn Derammelaere; Kurt Stockman (Trans. Inst. Meas. Control, 2022)

A Digital Twin Framework for Virtual Re-Commissioning of Work-Drive Systems Using CAD-based Motion Co-Simulation. - Rémy Carlier; Joris Gillis; Erwin Rademakers; Gianni Borghesan; Pieter De Clercq; Chris Ganseman; Kurt Stockman; Jeroen D. M. De Kooning (AIM, 2023)

Non-linear Friction Characterisation of the Unwinding Group in a Web Processing Machine. - Arul K. Mathivanan; Jasper De Viaene; Yentl Thielemans; Jeroen D. M. De Kooning; Kurt Stockman (AIM, 2023)

Sensitivity Analysis Framework for the Evaluation of Modular Drivetrain Architectures. - David van Os; Théo Tuerlinckx; Hendrik Vansompel; Peter Sergeant; Koen Laurijssen; Kurt Stockman (AIM, 2023)

Tension ripple-free dancer control of a web processing machine. - Jasper De Viaene; Yentl Thielemans; Arul K. Mathivanan; Jeroen D. M. De Kooning; Kurt Stockman (AIM, 2023)

Evaluation Framework for the Comparison of Modular Drivetrain Architectures. - David van Os; Koen Laurijssen; Hendrik Vansompel; Peter Sergeant; Niels Divens; Kurt Stockman (ICM, 2023)

Stiffness estimation of a lumped mass-spring system using sliding DFT. - Foeke Vanbecelaere; Michael Monte; Kurt Stockman (ICM, 2023)

Impact of Dual Variable Speed and Inlet Valve Control on the Efficiency and Operating Range of Low-Head Contra-Rotating Pump-Turbines. - Daan P. K. Truijen; Justus P. Hoffstaedt; Jonathan Fahlbeck; Antonio Jarquin Laguna; Håkan Nilsson; Kurt Stockman; Jeroen D. M. De Kooning (IEEE Access, 2024)

Reliability of Linear Losses-to-Power Scaling Method of Electric Drive Systems. - Ayoub Aroua; Luis Ramirez; Walter Lhomme; Florian Verbelen; Philippe Delarue; Alain Bouscayrol; Peter Sergeant; Kurt Stockman (IEEE Trans. Veh. Technol., 2024)

Edge Detection with Machine Vision Using Derivative of Gaussian Filters with q-Gaussian Kernels. - Jos F. E. Bruggeman; Kurt Stockman; Jeroen D. M. De Kooning (ICMRE, 2025)

Automating Asset Generation of Motion Systems from CAD Data in a Game Engine Using FMI. - Juan Chowdhury; Kurt Stockman; Jeroen D. M. De Kooning (ICPS, 2025)