Design of clock generating fully integrated PLL using low frequency reference signal. - Lasse Aaltonen; Mikko Saukoski; Kari Halonen (ECCTD, 2005)

Fully integrated charge pump for high voltage excitation of a bulk micromachined gyroscope. - Mikko Saukoski; Lasse Aaltonen; Kari Halonen (ISCAS (6), 2005)

Fully integrated charge sensitive amplifier for readout of micromechanical capacitive sensors. - Mikko Saukoski; Lasse Aaltonen; Teemu Salo; Kari Halonen (ISCAS (6), 2005)

On-chip Digitally Tunable High Voltage Generator for Electrostatic Control of Micromechanical Devices. - Lasse Aaltonen; Mikko Saukoski; Kari Halonen (CICC, 2006)

High resolution analog interface for micromachined capacitive accelerometer. - Lasse Aaltonen; Pasi Rahikkala; Mikko Saukoski; Kari Halonen (ECCTD, 2007)

High resolution analog-to-digital converter for low-frequency high-voltage signals. - Lasse Aaltonen; Kari Halonen (ICECS, 2008)

Integrated Charge-pump Phase-locked Loop with SC-loop Filter for Capacitive Microsensor Readout. - Timo Speeti; Lasse Aaltonen; Kari Halonen (ISCAS, 2009)

An interface for a 300°/s capacitive 2-axis micro-gyroscope with pseudo-CT readout. - Lasse Aaltonen; Timo Speeti; Mikko Saukoski; Kari Halonen (ISSCC, 2009)

High-resolution continuous-time interface for micromachined capacitive accelerometer. - Lasse Aaltonen; Pasi Rahikkala; Mikko Saukoski; Kari Halonen (Int. J. Circuit Theory Appl., 2009)

Pseudo-Continuous-Time Readout Circuit for a 300°s Capacitive 2-Axis Micro-Gyroscope. - Lasse Aaltonen; Kari A. I. Halonen (IEEE J. Solid State Circuits, 2009)

A 4.3 mm2 ASIC for a 300 °/s 2-axis capacitive micro-gyroscope. - Lasse Aaltonen; Antti Kalanti; Mika Pulkkinen; Matti Paavola; Mika Kämäräinen; Kari Halonen (ESSCIRC, 2010)

Charge-pump based frequency regulator for precision supply generation. - Antti Kalanti; Mikail Yücetas; Jarno Salomaa; Lasse Aaltonen; Kari Halonen (ISCAS, 2010)

A ΔΣ ADC for low power sensor applications. - Jarno Salomaa; Mikail Yücetas; Antti Kalanti; Lasse Aaltonen; Kari Halonen (ISCAS, 2010)

A closed-loop SC interface for a ±1.4g accelerometer with 0.33% nonlinearity and 2µg/vHz input noise density. - Mikail Yücetas; Jarno Salomaa; Antti Kalanti; Lasse Aaltonen; Kari Halonen (ISSCC, 2010)

A charge balancing accelerometer interface with electrostatic damping. - Mikail Yücetas; Lasse Aaltonen; Mika Pulkkinen; Jarno Salomaa; Antti Kalanti; Kari Halonen (ESSCIRC, 2011)

A 2.2 mA 4.3 mm 2 ASIC for a 1000°/s 2-Axis Capacitive Micro-Gyroscope. - Lasse Aaltonen; Antti Kalanti; Mika Pulkkinen; Matti Paavola; Mika Kämäräinen; Kari Halonen (IEEE J. Solid State Circuits, 2011)

A High-Resolution Accelerometer With Electrostatic Damping and Improved Supply Sensitivity. - Mikail Yücetas; Mika Pulkkinen; Antti Kalanti; Jarno Salomaa; Lasse Aaltonen; Kari Halonen (IEEE J. Solid State Circuits, 2012)

A 1.8 MHz MEMS-based oscillator with synchronous amplitude limiter. - Jakub Gronicz; Lasse Aaltonen; Nikolai Chekurov; Marko Kosunen; Kari Halonen (ECCTD, 2013)

SPI interface, mux-based synchronizer and DSP unit for a MEMS-based accelerometer. - Mika Pulkkinen; Lasse Aaltonen; Kari Halonen (ISCAS, 2015)