A multiple traveling salesman problem model for hot rolling scheduling in Shanghai Baoshan Iron & Steel Complex. - Lixin Tang; Jiyin Liu; Aiying Rong; Zihou Yang (Eur. J. Oper. Res., 2000)

A mathematical programming model for scheduling steelmaking-continuous casting production. - Lixin Tang; Jiyin Liu; Aiying Rong; Zihou Yang (Eur. J. Oper. Res., 2000)

Vision Based Navigation for Mobile Robots in Indoor Environment by Teaching and Playing-back Scheme. - Lixin Tang; Shin'ichi Yuta (ICRA, 2001)

A review of planning and scheduling systems and methods for integrated steel production. - Lixin Tang; Jiyin Liu; Aiying Rong; Zihou Yang (Eur. J. Oper. Res., 2001)

An effective heuristic algorithm to minimise stack shuffles in selecting steel slabs from the slab yard for heating and rolling. - Lixin Tang; Jiyin Liu; Aiying Rong; Zihou Yang (J. Oper. Res. Soc., 2001)

Indoor navigation for mobile robots using memorized omni-directional images and robot's motion. - Lixin Tang; Shin'ichi Yuta (IROS, 2002)

A modified genetic algorithm for the flow shop sequencing problem to minimize mean flow time. - Lixin Tang; Jiyin Liu (J. Intell. Manuf., 2002)

Mobile Robot Playback Navigation Based on Robot Pose Calculation Using Memorized Omnidirectional Images. - Lixin Tang; Shin'ichi Yuta (J. Robotics Mechatronics, 2002)

Applying GENET to the JSSCSOP. - Xin Feng; Lixin Tang; Ho-fung Leung (ISNN (1), 2004)

Problems associated with the direct torque control of an interior permanent-magnet synchronous motor drive and their remedies. - Muhammed Fazlur Rahman; Md. Enamul Haque; Lixin Tang; Limin Zhong (IEEE Trans. Ind. Electron., 2004)

An Effective Algorithm Based on GENET Neural Network Model for Job Shop Scheduling with Release Dates and Due Dates. - Xin Feng; Ho-fung Leung; Lixin Tang (ISNN (1), 2005)

Heuristic Combined Artificial Neural Networks to Schedule Hybrid Flow Shop with Sequence Dependent Setup Times. - Lixin Tang; Yanyan Zhang (ISNN (1), 2005)

A tabu search algorithm based on new block properties and speed-up method for permutation flow-shop with finite intermediate storage. - Shaohua Li; Lixin Tang (J. Intell. Manuf., 2005)

A neural network model and algorithm for the hybrid flow shop scheduling problem in a dynamic environment. - Lixin Tang; Wenxin Liu 001; Jiyin Liu (J. Intell. Manuf., 2005)

Model and Solution for the Multilevel Production-Inventory System Before Ironmaking in Shanghai Baoshan Iron and Steel Complex. - Guoli Liu; Lixin Tang (ICCSA (3), 2006)

A new Lagrangian relaxation algorithm for hybrid flowshop scheduling to minimize total weighted completion time. - Lixin Tang; Hua Xuan; Jiyin Liu (Comput. Oper. Res., 2006)

A case of rule-based heuristics for scheduling hot rolling seamless steel tube production. - Jianxiang Li; Ling Li 008; Lixin Tang; Huijiang Wu (Expert Syst. J. Knowl. Eng., 2006)

A new ILS algorithm for parallel machine scheduling problems. - Lixin Tang; Jiaxiang Luo (J. Intell. Manuf., 2006)

Lagrangian relaxation algorithms for real-time hybrid flowshop scheduling with finite intermediate buffers. - Lixin Tang; H. Xuan (J. Oper. Res. Soc., 2006)

Worst Case Analysis of a New Lower Bound for Flow Shop Weighted Completion Time Problem. - Danyu Bai; Lixin Tang (COCOA, 2007)

An Interleaved, Reduced Component Count, Multi-Voltage Bus DC/DC Converter For Fuel Cell Powered Electric Vehicle Applications. - Lixin Tang; Gui-Jia Su (IAS, 2007)

Disruption Management for the Vehicle Routing Problem with Time Windows. - Xiaoxia Zhang; Lixin Tang (ICIC (3), 2007)

Modeling Surface from a Single Grayscale Image. - Bin Xu; Lixin Tang; Hanmin Shi (ICME, 2007)

Solving Prize-Collecting Traveling Salesman Problem with Time Windows by Chaotic Neural Network. - Yanyan Zhang; Lixin Tang (ISNN (2), 2007)

A branch-and-price algorithm to solve the molten iron allocation problem in iron and steel industry. - Lixin Tang; Gongshu Wang; Jiyin Liu (Comput. Oper. Res., 2007)

Hybrid backward and forward dynamic programming based Lagrangian relaxation for single machine scheduling. - Lixin Tang; Hua Xuan; Jiyin Liu (Comput. Oper. Res., 2007)

Scheduling a hybrid flowshop with batch production at the last stage. - Hua Xuan; Lixin Tang (Comput. Oper. Res., 2007)

A mathematical programming model and solution for scheduling production orders in Shanghai Baoshan Iron and Steel Complex. - Lixin Tang; Guoli Liu (Eur. J. Oper. Res., 2007)

A Two-Stage Flexible Flowshop Problem with Deterioration. - Hua Gong; Lixin Tang (COCOON, 2008)

The Coordination of Two Parallel Machines Scheduling and Batch Deliveries. - Hua Gong; Lixin Tang (COCOON, 2008)

Two-Agent Scheduling with Linear Deteriorating Jobs on a Single Machine. - Peng Liu 004; Lixin Tang (COCOON, 2008)

A Three-Phase Bidirectional DC-DC Converter for Automotive Applications. - Gui-Jia Su; Lixin Tang (IAS, 2008)

A Hybrid VNS with TS for the Single Machine Scheduling Problem to Minimize the Sum of Weighted Tardiness of Jobs. - Xianpeng Wang 002; Lixin Tang (ICIC (2), 2008)

A New Hybrid Ant Colony Optimization Algorithm for the Traveling Salesman Problem. - Xiaoxia Zhang; Lixin Tang (ICIC (2), 2008)

A New Machine Scheduling Problem with Temperature Loss. - Danyu Bai; Lixin Tang; Meng Su (WKDD, 2008)

Raw material inventory solution in iron and steel industry using Lagrangian relaxation. - Lixin Tang; G. Liu; Jiyin Liu (J. Oper. Res. Soc., 2008)

An iterated local search heuristic for the capacitated prize-collecting travelling salesman problem. - Lixin Tang; Xianpeng Wang 002 (J. Oper. Res. Soc., 2008)

Color-Coating Production Scheduling for Coils in Inventory in Steel Industry. - Lixin Tang; Xianpeng Wang 002; Jiyin Liu (IEEE Trans Autom. Sci. Eng., 2008)

Shape from shading based on needle map and cellular automata. - Bin Xu; Lixin Tang; Hanmin Shi (Vis. Comput., 2008)

A scatter search based heuristic for the balancing of parallel assembly lines. - Qingxin Guo; Lixin Tang (CDC, 2009)

A simplified scatter search for a special single machine scheduling problem to minimize total weighted tardiness. - Xianpeng Wang 002; Lixin Tang (CDC, 2009)

Hot rolling turn scheduling using Lagrangian relaxation. - Yanyan Zhang; Lixin Tang (CDC, 2009)

A Lagrangian Relaxation Approach for Unit Commitment with Stochastic Disruption Management. - Ping Che; Lixin Tang (CSO (2), 2009)

Analysis of a Heuristics for Scheduling Two-Stage Hybrid Flow Shop. - Xie Xie; Lixin Tang (CSO (2), 2009)

Heuristics of Scheduling a Single Crane in Batch Annealing Process. - Xie Xie; Lixin Tang (CSO (2), 2009)

Local Search Heuristic for Multiple Objective Coil Scheduling Problem on Unrelated Parallel Machines. - Yang Yang; Lixin Tang (CSO (2), 2009)

An Effective Tabu Search Based Algorithm for Integrated Pickling-Rolling Scheduling and Coil Shuffling in Iron and Steel Industry. - Ren Zhao; Lixin Tang (CSO (2), 2009)

A Branch-and-Price Algorithm for the Dynamic Inventory Slab Allocation Problem in the Steel Industry. - Yongyue Zheng; Lixin Tang (CSO (2), 2009)

Hybrid Scatter Search and Tabu Search for the Mother Plate Design Problem in the Iron and Steel Industry. - Yongyue Zheng; Lixin Tang (CSO (2), 2009)

PSO algorithm for a scheduling parallel unit batch process with batching. - Ping Yan; Lixin Tang (GEC Summit, 2009)

A Tabu Search Algorithm for the Integrated Truck Scheduling and Storage Allocation in Quay. - Kun Li; Lixin Tang (ISCID (2), 2009)

Flowshop scheduling problems with transportation or deterioration between the batching and single machines. - Lixin Tang; Peng Liu 004 (Comput. Ind. Eng., 2009)

Scheduling of a single crane in batch annealing process. - Lixin Tang; Xie Xie; Jiyin Liu (Comput. Oper. Res., 2009)

A tabu search heuristic for the hybrid flowshop scheduling with finite intermediate buffers. - Xianpeng Wang 002; Lixin Tang (Comput. Oper. Res., 2009)

A population-based variable neighborhood search for the single machine total weighted tardiness problem. - Xianpeng Wang 002; Lixin Tang (Comput. Oper. Res., 2009)

Simultaneously scheduling multiple turns for steel color-coating production. - Lixin Tang; Xianpeng Wang 002 (Eur. J. Oper. Res., 2009)

Dynamically scheduling ships to multiple continuous berth spaces in an iron and steel complex. - Lixin Tang; Shaohua Li; Jiyin Liu (Int. Trans. Oper. Res., 2009)

Minimizing makespan in a two-machine flowshop scheduling with batching and release time. - Lixin Tang; Peng Liu 004 (Math. Comput. Model., 2009)

A new hybrid ant colony optimization algorithm for the vehicle routing problem. - Xiaoxia Zhang; Lixin Tang (Pattern Recognit. Lett., 2009)

A Scatter Search Algorithm for the Slab Stack Shuffling Problem. - Xu Cheng; Lixin Tang (ICSI (1), 2010)

An Improved Particle Swarm Optimization for Permutation Flowshop Scheduling Problem with Total Flowtime Criterion. - Xianpeng Wang 002; Lixin Tang (ICSI (1), 2010)

Steelmaking and refining coordinated scheduling problem with waiting time and transportation consideration. - Lixin Tang; Jing Guan; Guofen Hu (Comput. Ind. Eng., 2010)

A two-stage flow shop scheduling problem on a batching machine and a discrete machine with blocking and shared setup times. - Hua Gong; Lixin Tang; C. W. Duin (Comput. Oper. Res., 2010)

Modelling and a segmented dynamic programming-based heuristic approach for the slab stack shuffling problem. - Lixin Tang; Huizhi Ren (Comput. Oper. Res., 2010)

An efficient optimal solution to the coil sequencing problem in electro-galvanizing line. - Lixin Tang; Yang Yang; Jiyin Liu (Comput. Oper. Res., 2010)

A hybrid metaheuristic for the prize-collecting single machine scheduling problem with sequence-dependent setup times. - Xianpeng Wang 002; Lixin Tang (Comput. Oper. Res., 2010)

New heuristics for flow shop problem to minimize makespan. - Danyu Bai; Lixin Tang (J. Oper. Res. Soc., 2010)

A Two-Phase Heuristic for the Production Scheduling of Heavy Plates in Steel Industry. - Lixin Tang; Xianpeng Wang 002 (IEEE Trans. Control. Syst. Technol., 2010)

An Improved Particle Swarm Optimization Algorithm for the Hybrid Flowshop Scheduling to Minimize Total Weighted Completion Time in Process Industry. - Lixin Tang; Xianpeng Wang 002 (IEEE Trans. Control. Syst. Technol., 2010)

A PSO-Based Hybrid Multi-Objective Algorithm for Multi-Objective Optimization Problems. - Xianpeng Wang 002; Lixin Tang (ICSI (2), 2011)

Two-machine flowshop scheduling with intermediate transportation under job physical space consideration. - Hua Gong; Lixin Tang (Comput. Oper. Res., 2011)

Performance analysis of rotation schedule and improved strategy for open shop problem to minimise makespan. - Danyu Bai; Lixin Tang (Int. J. Syst. Sci., 2011)

A new Lagrangian Relaxation Algorithm for scheduling dissimilar parallel machines with release dates. - Lixin Tang; Yanyan Zhang (Int. J. Syst. Sci., 2011)

Scheduling a single machine with multiple job processing ability to minimize makespan. - Xianpeng Wang 002; Lixin Tang (J. Oper. Res. Soc., 2011)

A Scatter Search Algorithm for a Multistage Production Scheduling Problem With Blocking and Semi-Continuous Batching Machine. - Lixin Tang; Xianpeng Wang 002 (IEEE Trans. Control. Syst. Technol., 2011)

Multi-objective optimization using a hybrid differential evolution algorithm. - Xianpeng Wang 002; Lixin Tang (IEEE Congress on Evolutionary Computation, 2012)

Energy Consumption Prediction in Ironmaking Process Using Hybrid Algorithm of SVM and PSO. - Yanyan Zhang; Xiaolei Zhang; Lixin Tang (ISNN (2), 2012)

A Filter and Fan Based Algorithm for Slab Rehandling Problem in MPA of Steel Industry. - Xu Cheng; Lixin Tang (ICSI (1), 2012)

A discrete particle swarm optimization algorithm with self-adaptive diversity control for the permutation flowshop problem with blocking. - Xianpeng Wang 002; Lixin Tang (Appl. Soft Comput., 2012)

A stochastic production planning problem with nonlinear cost. - Lixin Tang; Ping Che; Jiyin Liu (Comput. Oper. Res., 2012)

Modeling and Solution for the Coil Sequencing Problem in Steel Color-Coating Production. - Lixin Tang; Yang Yang; Jiyin Liu (IEEE Trans. Control. Syst. Technol., 2012)

A pointer-based discrete differential evolution. - Yun Dong; Qingxin Guo; Lixin Tang (IEEE Congress on Evolutionary Computation, 2013)

A novel hybrid Differential Evolution-Estimation of Distribution Algorithm for dynamic optimization problem. - Xiangman Song; Lixin Tang (IEEE Congress on Evolutionary Computation, 2013)

Benders approach for the raw material transportation scheduling problem in steel industry. - Defeng Sun; Lixin Tang (ICCA, 2013)

Lagrangian decomposition and second-order cone programming based warehouse storage planning problem. - Yuan Yuan 028; Bo Zhang; Lixin Tang (ICCA, 2013)

An improved Benders decomposition algorithm for the logistics facility location problem with capacity expansions. - Lixin Tang; Wei Jiang; Georgios K. D. Saharidis (Ann. Oper. Res., 2013)

A two-stage stochastic mixed-integer program for the capacitated logistics fortification planning under accidental disruptions. - Xuwei Qin; Xiao Liu 002; Lixin Tang (Comput. Ind. Eng., 2013)

Solution method for the location planning problem of logistics park with variable capacity. - Jianxun Tang; Lixin Tang; Xianpeng Wang 002 (Comput. Oper. Res., 2013)

A Hybrid Multiobjective Evolutionary Algorithm for Multiobjective Optimization Problems. - Lixin Tang; Xianpeng Wang 002 (IEEE Trans. Evol. Comput., 2013)

Generation Scheduling Under a CO2 Emission Reduction Policy in the Deregulated Market. - Lixin Tang; Ping Che (IEEE Trans. Engineering Management, 2013)

Modeling and solution of the joint quay crane and truck scheduling problem. - Lixin Tang; Jiao Zhao; Jiyin Liu (Eur. J. Oper. Res., 2014)

Operations Research Transforms Baosteel's Operations. - Lixin Tang; Ying Meng; Gongshu Wang; Zhi-Long Chen; Jiyin Liu; Guofen Hu; Lijun Chen; Bo Zhang (Interfaces, 2014)

Integrated Charge Batching and Casting Width Selection at Baosteel. - Lixin Tang; Gongshu Wang; Zhi-Long Chen (Oper. Res., 2014)

An Improved Differential Evolution Algorithm for Practical Dynamic Scheduling in Steelmaking-Continuous Casting Production. - Lixin Tang; Yue Zhao; Jiyin Liu (IEEE Trans. Evol. Comput., 2014)

A stabilized finite volume method for Stokes equations using the lowest order P 1 - P 0 element pair. - Tie Zhang 002; Lixin Tang (Adv. Comput. Math., 2015)

An improved scatter search algorithm for the single machine total weighted tardiness scheduling problem with sequence-dependent setup times. - Qingxin Guo; Lixin Tang (Appl. Soft Comput., 2015)

Computational strategies for improved MINLP algorithms. - Lijie Su; Lixin Tang; Ignacio E. Grossmann (Comput. Chem. Eng., 2015)

A Branch-and-Cut algorithm for factory crane scheduling problem. - Xu Cheng; Lixin Tang; Panos M. Pardalos (J. Glob. Optim., 2015)

Differential Evolution With an Individual-Dependent Mechanism. - Lixin Tang; Yun Dong; Jiyin Liu (IEEE Trans. Evol. Comput., 2015)

An effective DE-EDA for permutation flow-shop scheduling problem. - Zuo-cheng Li; Qingxin Guo; Lixin Tang (CEC, 2016)

An operation optimization method based on improved EDA for BOF end-point control. - Chang Liu 039; Xiangman Song; Te Xu; Lixin Tang (CEC, 2016)

A multi-objective differential evolution algorithm with memory based population construction. - Xianpeng Wang 002; Zhiming Dong; Lixin Tang (CEC, 2016)

A subpopulation-based differential evolution algorithm for scheduling with batching decisions in steelmaking-continuous casting production. - Wenjie Xu; Fei Zou; Lixin Tang (CEC, 2016)

Energy consumption prediction for steelmaking production using PSO-based BP neural network. - Yanyan Zhang; Shengnan Zhao; Lixin Tang (CEC, 2016)

A contribution-guided discrete differential evolution algorithm for the quadratic multiple knapsack problem. - Xiangling Zhao; Yun Dong; Lixin Tang (CEC, 2016)

A differential evolution algorithm with double-mode crossover for supply chain scheduling in cold rolling. - Shengnan Zhao; Yang Yang; Qingxin Guo; Lixin Tang (CEC, 2016)

A weak finite element method for elliptic problems in one space dimension. - Tie Zhang 002; Lixin Tang (Appl. Math. Comput., 2016)

Scheduling of cracking production process with feedstocks and energy constraints. - Lijie Su; Lixin Tang; Ignacio E. Grossmann (Comput. Chem. Eng., 2016)

An adaptive multi-population differential evolution algorithm for continuous multi-objective optimization. - Xianpeng Wang 002; Lixin Tang (Inf. Sci., 2016)

Coil Batching to Improve Productivity and Energy Utilization in Steel Production. - Lixin Tang; Ying Meng; Zhi-Long Chen; Jiyin Liu (Manuf. Serv. Oper. Manag., 2016)

Preface of Special Issue of APJOR Operational Research (OR) and Environment. - Lixin Tang; Ilias Mamat; Tatsuo Oyama (Asia Pac. J. Oper. Res., 2017)

A machine-learning based memetic algorithm for the multi-objective permutation flowshop scheduling problem. - Xianpeng Wang 002; Lixin Tang (Comput. Oper. Res., 2017)

Competitive two-agent scheduling with deteriorating jobs on a single parallel-batching machine. - Lixin Tang; Xiaoli Zhao; Jiyin Liu; Joseph Y.-T. Leung (Eur. J. Oper. Res., 2017)

Novel time-space network flow formulation and approximate dynamic programming approach for the crane scheduling in a coil warehouse. - Yuan Yuan 028; Lixin Tang (Eur. J. Oper. Res., 2017)

Integrated Production, Inventory and Delivery Problems: Complexity and Algorithms. - Feng Li 024; Zhi-Long Chen; Lixin Tang (INFORMS J. Comput., 2017)

Improved quadratic cuts for convex mixed-integer nonlinear programs. - Lijie Su; Lixin Tang; David E. Bernal; Ignacio E. Grossmann (Comput. Chem. Eng., 2018)

Modeling and solution for steelmaking scheduling with batching decisions and energy constraints. - Wenjie Xu; Lixin Tang; Efstratios N. Pistikopoulos (Comput. Chem. Eng., 2018)

Integrated scheduling of rolling sector in steel production with consideration of energy consumption under time-of-use electricity prices. - Shengnan Zhao; Ignacio E. Grossmann; Lixin Tang (Comput. Chem. Eng., 2018)

Energy consumption diagnosis in the iron and steel industry via the Kalman filtering algorithm with a data-driven model. - Yanyan Zhang; Lixin Tang; Xiangman Song (Sci. China Inf. Sci., 2018)

Robust policies for a multi-stage production/inventory problem with switching costs and uncertain demand. - Cong Cheng; Lixin Tang (Int. J. Prod. Res., 2018)

A New Analytical Method for Relative Camera Pose Estimation Using Unknown Coplanar Points. - Zhenhua Yang; Lixin Tang; Lingsong He (J. Math. Imaging Vis., 2018)

A Hybrid Metaheuristic for the Task Assignment Problem in Parallel and Distributed Systems. - Zuo-cheng Li; Lixin Tang (ICPS, 2019)

A Multi-Objective Evolutionary Algorithm for Multi-Energy Allocation Problem Considering Production Changeover in the Integrated Iron and Steel Enterprise. - Linlin Li; Zan Wang; Xianpeng Wang 002; Lixin Tang (IEEE Access, 2019)

Modelling and discrete differential evolution algorithm for order rescheduling problem in steel industry. - Qingxin Guo; Lixin Tang (Comput. Ind. Eng., 2019)

A Benders decomposition-based framework for solving quay crane scheduling problems. - Defeng Sun; Lixin Tang; Roberto Baldacci (Eur. J. Oper. Res., 2019)

Least squares support vector machine with self-organizing multiple kernel learning and sparsity. - Chang Liu 039; Lixin Tang; Jiyin Liu (Neurocomputing, 2019)

Integrated Scheduling of Production and Two-Stage Delivery of Make-to-Order Products: Offline and Online Algorithms. - Lixin Tang; Feng Li 024; Zhi-Long Chen (INFORMS J. Comput., 2019)

Furnace operation optimization with hybrid model based on mechanism and data analytics. - Qiong Xia; Xianpeng Wang 002; Lixin Tang (Soft Comput., 2019)

A Dynamic Analytics Method Based on Multistage Modeling for a BOF Steelmaking Process. - Chang Liu 039; Lixin Tang; Jiyin Liu; Zhenhao Tang (IEEE Trans Autom. Sci. Eng., 2019)

Adaptive Multiobjective Differential Evolution With Reference Axis Vicinity Mechanism. - Lixin Tang; Xianpeng Wang 002; Zhiming Dong (IEEE Trans. Cybern., 2019)

Uneven Illumination Surface Defects Inspection Based on Saliency Detection and Intrinsic Image Decomposition. - Yuanhong Qiu; Lixin Tang; Bin Li 026; Suanlong Niu; Tongzhi Niu (IEEE Access, 2020)

Logistics optimisation of slab pre-marshalling problem in steel industry. - Peixin Ge; Ying Meng; Jiyin Liu; Lixin Tang; Ren Zhao (Int. J. Prod. Res., 2020)

Soft constraint handling for a real-world multiobjective energy distribution problem. - Yanyan Zhang; Gary G. Yen; Lixin Tang (Int. J. Prod. Res., 2020)

MOEA/D with a self-adaptive weight vector adjustment strategy based on chain segmentation. - Zhiming Dong; Xianpeng Wang 002; Lixin Tang (Inf. Sci., 2020)

A knee-guided prediction approach for dynamic multi-objective optimization. - Fei Zou; Gary G. Yen; Lixin Tang (Inf. Sci., 2020)

A Stacked Autoencoder With Sparse Bayesian Regression for End-Point Prediction Problems in Steelmaking Process. - Chang Liu 039; Lixin Tang; Jiyin Liu (IEEE Trans Autom. Sci. Eng., 2020)

Model and Heuristic Solutions for the Multiple Double-Load Crane Scheduling Problem in Slab Yards. - Guodong Zhao; Jiyin Liu; Lixin Tang; Ren Zhao; Yun Dong (IEEE Trans Autom. Sci. Eng., 2020)

Multiobjective Differential Evolution With Personal Archive and Biased Self-Adaptive Mutation Selection. - Xianpeng Wang 002; Zhiming Dong; Lixin Tang (IEEE Trans. Syst. Man Cybern. Syst., 2020)

Black box operation optimization of basic oxygen furnace steelmaking process with derivative free optimization algorithm. - Yongxia Liu; Lixin Tang; Chang Liu 039; Lijie Su; Jian Wu (Comput. Chem. Eng., 2021)

Multiobjective Multitasking Optimization Based on Decomposition with Dual Neighborhoods. - Xianpeng Wang 002; Zhiming Dong; Lixin Tang; Qingfu Zhang 001 (CoRR, 2021)

An exact algorithm for the unidirectional quay crane scheduling problem with vessel stability. - Defeng Sun; Lixin Tang; Roberto Baldacci; Andrew Lim 001 (Eur. J. Oper. Res., 2021)

Continuous-time formulation and differential evolution algorithm for an integrated batching and scheduling problem in aluminium industry. - Qingxin Guo; Lixin Tang; Jiyin Liu; Shengnan Zhao (Int. J. Prod. Res., 2021)

M/PH/C queue under a congestion-based staffing policy with applications in steel industry operations. - Yanhe Jia; Zhe George Zhang; Lixin Tang (Int. J. Prod. Res., 2021)

Blessing of dimensionality at the edge and geometry of few-shot learning. - Ivan Yu. Tyukin; Alexander N. Gorban; Alistair A. McEwan; Sepehr Meshkinfamfard; Lixin Tang (Inf. Sci., 2021)

A reinforcement learning approach for dynamic multi-objective optimization. - Fei Zou; Gary G. Yen; Lixin Tang; Chunfeng Wang (Inf. Sci., 2021)

Color-Coating Scheduling With a Multiobjective Evolutionary Algorithm Based on Decomposition and Dynamic Local Search. - Zhiming Dong; Xianpeng Wang 002; Lixin Tang (IEEE Trans Autom. Sci. Eng., 2021)

An Estimation of Distribution Algorithm With Filtering and Learning. - Lixin Tang; Xiangman Song; Jiyin Liu; Chang Liu 039 (IEEE Trans Autom. Sci. Eng., 2021)

Clear Memory-Augmented Auto-Encoder for Surface Defect Detection. - Wei Luo; Tongzhi Niu; Lixin Tang; Wenyong Yu; Bin Li 026 (CoRR, 2022)

Single-machine scheduling with energy generation and storage systems. - Hyun-Jung Kim; Eun-Seok Kim; Jun-Ho Lee; Lixin Tang; Yang Yang (Int. J. Prod. Res., 2022)

A graph partitioning based cooperative coevolution for the batching problem in steelmaking production. - Gongshu Wang; Qingxin Guo; Wenjie Xu; Lixin Tang (Int. J. Prod. Res., 2022)

Improvement of Kriging interpolation with learning kernel in environmental variables study. - Te Xu; Yongxia Liu; Lixin Tang; Chang Liu 039 (Int. J. Prod. Res., 2022)

Dual Probability Learning Based Local Search for the Task Assignment Problem. - Zuocheng Li; Lixin Tang; Jin-Kao Hao (IEEE Trans Autom. Sci. Eng., 2022)

Strip Hardness Prediction in Continuous Annealing Using Multiobjective Sparse Nonlinear Ensemble Learning With Evolutionary Feature Selection. - Xianpeng Wang 002; Yao Wang; Lixin Tang (IEEE Trans Autom. Sci. Eng., 2022)

A Memetic Algorithm Based on Probability Learning for Solving the Multidimensional Knapsack Problem. - Zuocheng Li; Lixin Tang; Jiyin Liu (IEEE Trans. Cybern., 2022)

A Multiobjective Evolutionary Nonlinear Ensemble Learning With Evolutionary Feature Selection for Silicon Prediction in Blast Furnace. - Xianpeng Wang 002; Tenghui Hu; Lixin Tang (IEEE Trans. Neural Networks Learn. Syst., 2022)

Learning-based multi-objective evolutionary algorithm for batching decision problem. - Ying Meng; Tianyang Li; Lixin Tang (Comput. Oper. Res., 2023)

A Novel Black Box Process Quality Optimization Approach based on Hit Rate. - Yang Yang; Jian Wu; Xiangman Song; Derun Wu; Lijie Su; Lixin Tang (CoRR, 2023)

The First High-quality Reference Genome of Sika Deer Provides Insights into High-tannin Adaptation. - Xiumei Xing; Cheng Ai; Tianjiao Wang; Yang Li; Huitao Liu; Pengfei Hu; Guiwu Wang; Huamiao Liu; Hongliang Wang; Ranran Zhang; Junjun Zheng; Xiaobo Wang; et al. (Genom. Proteom. Bioinform., 2023)

A Novel Operation Optimization Method Based on Mechanism Analytics for the Quality of Molten Steel in the BOF Steelmaking Process. - Dongying Song; Lixin Tang; Chang Liu 039; Jian Wu; Xiangman Song (IEEE Trans Autom. Sci. Eng., 2023)

Multiobjective Multitask Optimization-Neighborhood as a Bridge for Knowledge Transfer. - Xianpeng Wang 002; Zhiming Dong; Lixin Tang; Qingfu Zhang 001 (IEEE Trans. Evol. Comput., 2023)

Optimal plate design problem in steel production. - Shengnan Zhao; Ying Meng; Lijie Su; Jiyin Liu; Lixin Tang (Int. J. Prod. Res., 2023)

Solving the Single-Row Facility Layout Problem by K-Medoids Memetic Permutation Group. - Lixin Tang; Zuocheng Li; Jin-Kao Hao (IEEE Trans. Evol. Comput., 2023)

A metaheuristic algorithm for a locomotive routing problem arising in the steel industry. - Baobin Huang; Lixin Tang; Roberto Baldacci; Gongshu Wang; Defeng Sun (Eur. J. Oper. Res., 2023)

Improvement of Reinforcement Learning With Supermodularity. - Ying Meng; Fengyuan Shi 003; Lixin Tang; Defeng Sun (IEEE Trans. Neural Networks Learn. Syst., 2023)

A generalized well neural network for surface defect segmentation in Optical Communication Devices via Template-Testing comparison. - Tongzhi Niu; Zhiyu Xie 002; Jie Zhang; Lixin Tang; Bin Li 026; Hao Wang 048 (Comput. Ind., 2023)

Multi-Objective Optimization for Joint Communication and Computing Resource Allocation in NOMA-Based MEC System. - Hongzhe Wang; Lixin Tang; Min Xiao; Qingxin Guo (CEC, 2024)

NSMD-NAS: Retinal Image Segmentation with Neural Architecture Search and Non-Subsampled Multiscale Decomposition. - Hanyu Zhang; Lixin Tang; Xiangman Song; Te Xu (CEC, 2024)

An Enhanced Surrogate-Assisted Multi-Objective Differential Evolution Algorithm with Self-Adaptive Strategies for Order Planning in Hot Rolling Process: Surrogate-Assisted MODE with Self-Adaptive Strategies for OPHR Problem. - Gelegen Che; Lixin Tang; Guodong Zhao; Qingxin Guo; Jianqiang Guo (GECCO Companion, 2024)

Bi-objective approach for lot-sizing problem in cold rolling production planning. - Weiyan Jia; Lixin Tang; Yang Yang; Yun Dong (GECCO Companion, 2024)

Symmetry Parallel Search Strategy For Permutation-related Optimization Problems. - Tianyang Li; Ying Meng; Lixin Tang (GECCO Companion, 2024)

Joint Entropy Enhanced Multi-objective Bayesian Optimization for Graph Pruning. - Weiwei Zhang; Meiling Xu; Lixin Tang (GECCO Companion, 2024)

Exploring a Small Molecule Property Prediction Model with Optimal Comprehensive Performance through Multi-Objective Optimization Algorithms. - Junfeng Zhao; Lixin Tang; Yong Shuai (GECCO Companion, 2024)

Robust Fuzzy Decision Support Framework for Comprehensive Evaluating of Food Supply Chain Performance. - Qiankun Jiang; Haiyan Wang; Lixin Tang (IEEE Access, 2024)

A Decomposition Method for the Group-Based Quay Crane Scheduling Problem. - Defeng Sun; Lixin Tang; Roberto Baldacci; Zihan Chen (INFORMS J. Comput., 2024)

Data-driven quasi-convex method for hit rate optimization of process product quality in digital twin. - Yang Yang; Jian Wu; Xiangman Song; Derun Wu; Lijie Su; Lixin Tang (J. Ind. Inf. Integr., 2024)

A clustering-assisted adaptive evolutionary algorithm based on decomposition for multimodal multiobjective optimization. - Tenghui Hu; Xianpeng Wang 002; Lixin Tang; Qingfu Zhang 001 (Swarm Evol. Comput., 2024)

Evolutionary modeling approach based on multiobjective genetic programming for strip quality prediction. - Yao Wang; Xianpeng Wang 002; Lixin Tang (Swarm Evol. Comput., 2024)

An Estimation of Distribution Algorithm With Resampling and Local Improvement for an Operation Optimization Problem in Steelmaking Process. - Lixin Tang; Chang Liu 039; Jiyin Liu; Xianpeng Wang 002 (IEEE Trans. Syst. Man Cybern. Syst., 2024)

A Novel Dynamic Operation Optimization Method Based on Multiobjective Deep Reinforcement Learning for Steelmaking Process. - Chang Liu 039; Lixin Tang; Chenche Zhao (IEEE Trans. Neural Networks Learn. Syst., 2024)

Scheduling of Continuous Annealing With a Multi-Objective Differential Evolution Algorithm Based on Deep Reinforcement Learning. - Tianyang Li; Ying Meng; Lixin Tang (IEEE Trans Autom. Sci. Eng., 2024)

Multiobjective Ensemble Learning With Multiscale Data for Product Quality Prediction in Iron and Steel Industry. - Xianpeng Wang 002; Yao Wang; Lixin Tang; Qingfu Zhang 001 (IEEE Trans. Evol. Comput., 2024)

A Learning-assisted Discrete Differential Evolution for Resource Constrained Project Scheduling. - Yun Dong; Lixin Tang; Weiyan Jia (GECCO, 2025)

Adaptive Collaborative Learning Polyp Segmentation Framework Based on Contour-Driven Parallel Attention Network. - Jingwen Cong; Kumaradevan Punithakumar; Lixin Tang; Michelle Noga (ISBI, 2025)

A reinforcement learning based Lagrangian relaxation algorithm for multi-energy allocation problem in steel enterprise. - Miao Chang; Shengnan Zhao; Lixin Tang; Jiyin Liu; Yanyan Zhang (Comput. Chem. Eng., 2025)

SBDNet: A Scale and Edge Guided Bidecoding Network for Land Parcel Extraction. - Wei Wu 029; Yapeng Liu; Lixin Tang; Haiping Yang; Liao Yang; Jin Li; Zuohui Chen (IEEE J. Sel. Top. Appl. Earth Obs. Remote. Sens., 2025)

A Hybrid Method Based on Multi-Agent Reinforcement Learning and Integer Programming for Dynamic Slab Design Problems in Steel Industry. - Baiyang He; Ying Meng; Lixin Tang (IEEE Trans Autom. Sci. Eng., 2025)

A Combination Feature-Based Reinforcement Learning Approach via Mathematical Optimization. - Fengyuan Shi 003; Ying Meng; Jiyin Liu; Lixin Tang (IEEE Trans Autom. Sci. Eng., 2025)

Tree Search Reinforcement Learning for Two-Dimensional Cutting Stock Problem With Complex Constraints. - Fengyuan Shi 003; Ying Meng; Lixin Tang (IEEE Trans Autom. Sci. Eng., 2025)

Building Accurate Exchange-Correlation Functional for Density Functional Theory Through Data Analytics and Optimization. - Junfeng Zhao; Lixin Tang; Jiyin Liu; Jian Wu; Xiangman Song (IEEE Trans Autom. Sci. Eng., 2025)

A Multiobjective Evolutionary Multiscale Transformer Incorporating Fractal Features for Steel Materials Quality Analytics. - Kainan Zhang; Chang Liu 039; Lixin Tang (IEEE Trans. Image Process., 2025)

An Off-Policy Reinforcement Learning-Based Adaptive Optimization Method for Dynamic Resource Allocation Problem. - Baiyang He; Ying Meng; Lixin Tang (IEEE Trans. Neural Networks Learn. Syst., 2025)

My Research Software. - Tianyang Li; Ying Meng; Lixin Tang; Yuxuan Zhang (Zenodo, 2025)

My Research Software. - Tianyang Li; Ying Meng; Lixin Tang; Yuxuan Zhang (Zenodo, 2025)

Source Code and Supplementary Material of DRLIP. - Tianyang Li; Ying Meng; Lixin Tang; Yuxuan Zhang (Zenodo, 2025)

MOEA/D With Spatial-Temporal Topological Tensor Prediction for Evolutionary Dynamic Multiobjective Optimization. - Xianpeng Wang 002; Yumeng Zhao; Lixin Tang; Xin Yao 001 (IEEE Trans. Evol. Comput., 2025)

Searching in Symmetric Solution Space for Permutation-Related Optimization Problems. - Lixin Tang; Tianyang Li; Ying Meng; Jiyin Liu (IEEE Trans. Pattern Anal. Mach. Intell., 2025)

A Dual Mutation-Based Evolutionary Algorithm for Dynamic Multiobjective Optimization With Undetectable Changes. - Yuanchao Liu; Lixin Tang; Jinliang Ding; Qingda Chen; Kanrong Liu; Jianchang Liu (IEEE Trans. Evol. Comput., 2025)

Adaptative Scaler-Moment Crystal Graph Attention Neural Network for Material Property Prediction. - Weiwei Zhang; Lixin Tang; Meiling Xu (IEEE Trans. Emerg. Top. Comput. Intell., 2025)

Multiobjective Evolutionary Learning for Multitask Quality Prediction Problems in Continuous Annealing Process. - Chang Liu 039; Lixin Tang; Kainan Zhang; Xuanqi Xu (IEEE Trans. Neural Networks Learn. Syst., 2025)

Deep Reinforcement Learning With Integer Optimization for Dynamic Slab Assignment Problem. - Tianyang Li; Ying Meng; Lixin Tang; Yuxuan Zhang (IEEE Trans. Control. Syst. Technol., 2025)