Calibration of Commercial Test Sets for Non-Conventional Instrument Transformers. - Enrico Mohns; Alessandro Mortara; Hüseyin Çayci; Ernest Houtzager; Soeren Fricke; Marco Agustoni; B. Ayhan (AMPS, 2017)

A Calibration Setup for IEC 61850-9-2 Devices. - Marco Agustoni; Alessandro Mortara (IEEE Trans. Instrum. Meas., 2017)

Phasor Measurement Unit and Sampled Values: Measurement and Implementation Challenges. - Guglielmo Frigo; Marco Agustoni (AMPS, 2021)

Characterization of DAC Phase Offset in IEC 61850-9-2 Calibration Systems. - Marco Agustoni; Guglielmo Frigo (IEEE Trans. Instrum. Meas., 2021)

Impedance Metrology: Bridging the LF-RF Gap. - Marco Agustoni; Frédéric Overney (IEEE Trans. Instrum. Meas., 2021)

Development of a Transfer Standard for DC Power Quality Reference Systems. - Guglielmo Frigo; Marco Agustoni (AMPS, 2022)

Phasor Measurement Unit With Digital Inputs: Synchronization and Interoperability Issues. - Marco Agustoni; Paolo Castello; Guglielmo Frigo (IEEE Trans. Instrum. Meas., 2022)

Implementation of Adaptive Taylor-Fourier Filters on a Real-Time Industrial Controller: Feasibility and Latency Analysis. - Marco Agustoni; Guglielmo Frigo (AMPS, 2023)

Broadband Calculable Coaxial Resistors. - Marco Agustoni; Sophie De Préville; Frédéric Overney (IEEE Trans. Instrum. Meas., 2023)

Characterization of Analog Front-End in PMU Design for Inertia Monitoring. - Marco Agustoni; Guglielmo Frigo (I2MTC, 2024)

Cable Correction Model for HF Resistance Standards Comparisons. - Marco Agustoni; Frédéric Overney; Ali L. Eichenberger; Jan Kucera 001 (IEEE Trans. Instrum. Meas., 2025)