A biaxial probe for nondestructive testing on conductive materials. - Andrea Bernieri; Giovanni Betta; Luigi Ferrigno; Marco Laracca (IEEE Trans. Instrum. Meas., 2004)

An automated self-calibrated instrument for nondestructive testing on conductive materials. - Andrea Bernieri; Giovanni Betta; Luigi Ferrigno; Marco Laracca (IEEE Trans. Instrum. Meas., 2004)

Reproducibility and Uncertainty of Conducted Emission Measurements for Adjustable-Speed Electrical Power Drive Characterization. - Giovanni Betta; Domenico Capriglione; Marco Laracca (IEEE Trans. Instrum. Meas., 2006)

Crack Shape Reconstruction in Eddy Current Testing Using Machine Learning Systems for Regression. - Andrea Bernieri; Luigi Ferrigno; Marco Laracca; Mario Molinara (IEEE Trans. Instrum. Meas., 2008)

Measurement of Passive R, L, and C Components Under Nonsinusoidal Conditions: The Solution of Some Case Studies. - Luigi Ferrigno; Marco Laracca; Antonio Pietrosanto (IEEE Trans. Instrum. Meas., 2008)

GMR-Based ECT Instrument for Detection and Characterization of Crack on a Planar Specimen: A Hand-Held Solution. - Giovanni Betta; Luigi Ferrigno; Marco Laracca (IEEE Trans. Instrum. Meas., 2012)

An FPGA-Based Instrument for the Estimation of R, L, and C Parameters Under Nonsinusoidal Conditions. - Luigi Ferrigno; Marco Laracca; Consolatina Liguori; Antonio Pietrosanto (IEEE Trans. Instrum. Meas., 2012)

A novel biaxial probe implementing multifrequency excitation and SVM processing for NDT. - Andrea Bernieri; Giovanni Betta; Luigi Ferrigno; Marco Laracca (I2MTC, 2013)

On the suitability of compressive sampling for the measurement of electrical power quality. - Francesco Bonavolontà; Mauro D'Arco; Giacomo Ianniello; Annalisa Liccardo; Rosario Schiano Lo Moriello; Luigi Ferrigno; Marco Laracca; Gianfranco Miele (I2MTC, 2013)

Modelling, parametric analysis, and optimization of an experimental set-up for acoustic antenna calibration. - Orsola Petrella; Salvatore Ameduri; Vincenzo Quaranta; Giovanni Betta; Marco Laracca (I2MTC, 2013)

Crack Depth Estimation by Using a Multi-Frequency ECT Method. - Andrea Bernieri; Giovanni Betta; Luigi Ferrigno; Marco Laracca (IEEE Trans. Instrum. Meas., 2013)

Cost-Effective FPGA Instrument for Harmonic and Interharmonic Monitoring. - Giovanni Betta; Luigi Ferrigno; Marco Laracca (IEEE Trans. Instrum. Meas., 2013)

Optimized complex signals for Eddy Current Testing. - Giovanni Betta; Luigi Ferrigno; Marco Laracca; Pietro Burrascano; Marco Ricci 001 (I2MTC, 2014)

Multifrequency Excitation and Support Vector Machine Regressor for ECT Defect Characterization. - Andrea Bernieri; Giovanni Betta; Luigi Ferrigno; Marco Laracca; Stefano Mastrostefano (IEEE Trans. Instrum. Meas., 2014)

An Experimental Setup for the Calibration of Acoustic Antenna. - Orsola Petrella; Salvatore Ameduri; Vincenzo Quaranta; Giovanni Betta; Marco Laracca (IEEE Trans. Instrum. Meas., 2014)

ECT probe improvement for in-service non-destructive testing on conductive materials. - Andrea Bernieri; Giovanni Betta; Luigi Ferrigno; Marco Laracca; Antonio Rasile (I2MTC, 2018)

Characterization of a TMR Sensor for EC-NDT Applications. - Andrea Bernieri; Giovanni Betta; Luigi Ferrigno; Marco Laracca; Antonio Rasile (Sensors, 2018)

Improvement of the Frequency Behavior of an EC-NDT Inspection System. - Andrea Bernieri; Giovanni Betta; Luigi Ferrigno; Marco Laracca; Antonio Rasile (Sensors, 2018)

Calibration System for Multi-sensor Acoustical Systems. - Orsola Petrella; Giovanni Cerasuolo; Salvatore Ameduri; Vincenzo Quaranta; Marco Laracca (Sensors, 2018)

Metrological Characterization of a Novel Microsensor Platform for Activated Carbon Filters Monitoring. - Gianni Cerro; Marco Ferdinandi; Luigi Ferrigno; Marco Laracca; Mario Molinara (IEEE Trans. Instrum. Meas., 2018)

Fast Eddy Current Testing Defect Classification Using Lissajous Figures. - Gianni D'Angelo; Marco Laracca; Salvatore Rampone; Giovanni Betta (IEEE Trans. Instrum. Meas., 2018)

An Uncertainty Analysis for the Calibration of GNSS-Based Vehicle Speed Meters. - Adolfo Martucci; Giovanni Cerasuolo; Orsola Petrella; Marco Laracca (MetroInd4.0&IoT, 2019)

Eddy Current Testing Probe Based on Double-Coil Excitation and GMR Sensor. - Andrea Bernieri; Luigi Ferrigno; Marco Laracca; Antonio Rasile (IEEE Trans. Instrum. Meas., 2019)

On a finite domain magnetic localization by means of TMR triaxial sensors. - Gianni Cerro; Luigi Ferrigno; Marco Laracca; Filippo Milano; Paolo Bellitti; Mauro Serpelloni; Oscar Casas Piedrafita (I2MTC, 2020)

On the Calibration of GNSS-Based Vehicle Speed Meters. - Adolfo Martucci; Giovanni Cerasuolo; Orsola Petrella; Marco Laracca (Sensors, 2020)

A UWB-based localization system: analysis of the effect of anchor positions and robustness enhancement in indoor environments. - Luigi Ferrigno; Gianfranco Miele; Filippo Milano; Valentina Pingerna; Gianni Cerro; Marco Laracca (I2MTC, 2021)

On the Power Consumption of a Bluetooth Device Operating in Beacon Mode. - Luigi Ferrigno; Filippo Milano; António Espírito-Santo 001; José A. C. Salvado; Marco Laracca; Vincenzo Paciello (IECON, 2021)

Analysis of the Uncertainty Contributions for on Board Vehicle Speed Meters Calibration Method. - Luigi Ferrigno; Marco Laracca; Adolfo Martucci; Gianfranco Miele; Silvia Sangiovanni (MetroAutomotive, 2021)

Magnetic Localization System for Short-Range Positioning: A Ready-to-Use Design Tool. - Luigi Ferrigno; Marco Laracca; Filippo Milano; Gianni Cerro; Paolo Bellitti; Mauro Serpelloni; Oscar Casas Piedrafita (IEEE Trans. Instrum. Meas., 2021)

Performance comparison in Ultra Wide Band positioning in sensor networks: least square minimization versus grid search approach. - Luigi Ferrigno; Filippo Milano; Valentina Pingerna; Gianni Cerro; Marco Laracca (M&N, 2022)

Use of Magnetic Positioning Systems in Industrial and Biomedical Applications. - Andrea Bernieri; Gianni Cerro; Luigi Ferrigno; Marco Laracca; Filippo Milano (IEEE Instrum. Meas. Mag., 2022)

UWB-Based Indoor Localization: How to Optimally Design the Operating Setup? - Gianni Cerro; Luigi Ferrigno; Marco Laracca; Gianfranco Miele; Filippo Milano; Valentina Pingerna (IEEE Trans. Instrum. Meas., 2022)

A Fast ECT Measurement Method for the Thickness of Metallic Plates. - Alessandro Sardellitti; Giulia Di Capua; Marco Laracca; Antonello Tamburrino; Salvatore Ventre; Luigi Ferrigno (IEEE Trans. Instrum. Meas., 2022)

A test bed for in-laboratory calibration of optical-based speedometers. - Andrea Bernieri; G. Iannitti; Marco Laracca; Gianfranco Miele; Silvia Sangiovanni (I2MTC, 2023)

An Analytical Model for Lithium-Ion Batteries Based on Genetic Programming Approach. - Filippo Milano; Giulia Di Capua; Nunzio Oliva; Francesco Porpora; Carmine Bourelly; Luigi Ferrigno; Marco Laracca (MetroAutomotive, 2023)

An Eddy-Current Testing Method for Measuring the Thickness of Metallic Plates. - Alessandro Sardellitti; Filippo Milano; Marco Laracca; Salvatore Ventre; Luigi Ferrigno; Antonello Tamburrino (IEEE Trans. Instrum. Meas., 2023)

A Non-Invasive Technique for Long-Term Monitoring of Gastroesophageal Reflux - A Pilot Study. - Marco Laracca; Gianfranco Miele; Luca Podestà; Silvia Sangiovanni (Sensors, 2023)

Novel Approach for Battery State of Charge Evaluation through Inductive Sensing. - Carmine Bourelly; Filippo Milano; Luigi Ferrigno; Marco Laracca; Gui Yun Tian (I2MTC, 2024)

Assessing Impact of Uncertainty on a Decision Support System for Flexibility Exploitation in a Distribution Network. - Tommaso Bragatto; Federico Carere; Alberto Geri; Marco Laracca; Parastou Poursoltan; Silvia Sangiovanni (I2MTC, 2024)

A Method to Design Open Loop Current Transducers for Busbar Applications. - Federico Carere; Marco Laracca; Davide Saccavini; Silvia Sangiovanni (I2MTC, 2024)

Performance Enhancement of Graphene-Based Biopotential Electrodes through Electrical Contact Geometry Optimization. - Babar Ali; Umar Farooq; Marco Laracca; Hossein Cheraghi Bidsorkhi; Alessandro Gioseppe D'Aloia; Maria Sabrina Sarto (M&N, 2024)

Multi-Parameter Estimation by combining Dimensional Analysis and Eddy Current Testing. - Alessandro Sardellitti; Vincenzo Mottola; Filippo Milano; Luigi Ferrigno; Antonello Tamburrino; Marco Laracca (MetroInd4.0 & IoT, 2024)

An Eddy Current Probe for the Detection of Subsuperficial Defects of Any Orientation. - Federico Carere; Alessandro Sardellitti; Andrea Bernieri; Luigi Ferrigno; Silvia Sangiovanni; Marco Laracca (IEEE Trans. Instrum. Meas., 2024)

BLE-Based Indoor Localization: Analysis of Some Solutions for Performance Improvement. - Filippo Milano; Helbert da Rocha; Marco Laracca; Luigi Ferrigno; António Espírito-Santo 001; José A. C. Salvado; Vincenzo Paciello (Sensors, 2024)

An improvement in defect detection through integration of Rotating Eddy Currents and multi-tone excitation. - Federico Carere; Alessandro Sardellitti; Silvia Sangiovanni; Andrea Bernieri; Marco Laracca (I2MTC, 2025)

Numerical modeling for lithium iron phosphate batteries. - B. Palmieri; A. Martone; Alessio Miele; Filippo Milano; Mario Molinara; Luigi Ferrigno; Gianni Cerro; Marco Laracca (I2MTC, 2025)

Enhancing Corrosion Detection and Characterization: An Innovative Approach With Pot-Cored Eddy Current Probe. - Alessandro Sardellitti; Filippo Milano; Marco Laracca; Luigi Ferrigno; Antonello Tamburrino; Guiyun Tian 001 (IEEE Trans. Instrum. Meas., 2025)