Coping with finite storage space in job shops through order release control: an assessment by simulation. - Matthias Thürer; Moacir Godinho Filho; Mark Stevenson (Int. J. Comput. Integr. Manuf., 2013)

Competitive priorities of small manufacturers in Brazil. - Matthias Thürer; Moacir Godinho Filho; Mark Stevenson; Lawrence D. Fredendall (Ind. Manag. Data Syst., 2013)

The design of simple subcontracting rules for make-to-order shops: An assessment by simulation. - Matthias Thürer; Mark Stevenson; Ting Qu; Moacir Godinho Filho (Eur. J. Oper. Res., 2014)

Warehouse workload control for production logistic. - Bingzhu Chen; Ting Qu; Matthias Thürer; George Q. Huang; Congdong Li; Su Xiu Xu (CASE, 2017)

Load-Based POLCA: An Assessment of the Load Accounting Approach. - Nuno O. Fernandes; Matthias Thürer; Mark Stevenson; Silvio Carmo-Silva (WorldCIST (2), 2017)

Optimal configuration of assembly supply chains based on Hybrid augmented Lagrangian coordination in an industrial cluster. - Ting Qu; D. X. Nie; C. D. Li; Matthias Thürer; George Q. Huang (Comput. Ind. Eng., 2017)

System dynamics analysis for an Internet-of-Things-enabled production logistics system. - Ting Qu; Matthias Thürer; Junhao Wang; Zongzhong Wang; Huan Fu; Congdong Li; George Q. Huang (Int. J. Prod. Res., 2017)

On the backlog-sequencing decision for extending the applicability of ConWIP to high-variety contexts: an assessment by simulation. - Matthias Thürer; Nuno O. Fernandes; Mark Stevenson; Ting Qu (Int. J. Prod. Res., 2017)

Digital Lean Cyber-Physical Production Systems: The Emergence of Digital Lean Manufacturing and the Significance of Digital Waste. - David Romero 001; Paolo Gaiardelli; Daryl Powell; Thorsten Wuest; Matthias Thürer (APMS (1), 2018)

Dual Resource Constrained (DRC) Shops: Literature Review and Analysis. - Matthias Thürer (APMS (1), 2018)

A note on 'beyond the trade-off and cumulative capabilities models: alternative models of operations strategy'. - Roberto Sarmiento; Garvan Whelan; Matthias Thürer (Int. J. Prod. Res., 2018)

On the beat of the drum: improving the flow shop performance of the Drum-Buffer-Rope scheduling mechanism. - Matthias Thürer; Mark Stevenson (Int. J. Prod. Res., 2018)

Proposal of a Reconfigurability Index Using Analytic Network Process. - Isabela Maganha; Cristóvão Silva; Luis Ferreira; Matthias Thürer; Enzo Morosini Frazzon; Marco Silvestri (IEEM, 2019)

Total Quality Management and Quality Circles in the Digital Lean Manufacturing World. - David Romero 001; Paolo Gaiardelli; Daryl Powell; Thorsten Wuest; Matthias Thürer (APMS (1), 2019)

Cyber-Physical Waste Identification and Elimination Strategies in the Digital Lean Manufacturing World. - David Romero 001; Paolo Gaiardelli; Matthias Thürer; Daryl Powell; Thorsten Wuest (APMS (1), 2019)

Centralised vs. decentralised control decision in card-based control systems: comparing kanban systems and COBACABANA. - Matthias Thürer; Nuno O. Fernandes; Mark Stevenson; Ting Qu; Cong-Dong Li (Int. J. Prod. Res., 2019)

On the combined effect of due date setting, order release, and output control: an assessment by simulation. - Matthias Thürer; Mark Stevenson; Martin J. Land; Lawrence D. Fredendall (Int. J. Prod. Res., 2019)

Workload control in dual-resource constrained high-variety shops: an assessment by simulation. - Matthias Thürer; Mark Stevenson; Paolo Renna (Int. J. Prod. Res., 2019)

IoT-enabled dynamic lean control mechanism for typical production systems. - Kai Zhang; Ting Qu; Dajian Zhou; Matthias Thürer; Yang Liu 034; Duxian Nie; Congdong Li; George Q. Huang (J. Ambient Intell. Humaniz. Comput., 2019)

POLC-A: an assessment of POLCA's authorization element. - Matthias Thürer; Nuno O. Fernandes; Mark Stevenson; Cristóvão Silva; Silvio Carmo-Silva (J. Intell. Manuf., 2019)

Internet of Things (IoT) driven kanban system for reverse logistics: solid waste collection. - Matthias Thürer; Y. H. Pan; Ting Qu; H. Luo; C. D. Li; George Q. Huang (J. Intell. Manuf., 2019)

New Forms of Gemba Walks and Their Digital Tools in the Digital Lean Manufacturing World. - David Romero 001; Paolo Gaiardelli; Thorsten Wuest; Daryl Powell; Matthias Thürer (APMS (2), 2020)

Workload control and optimised order release: an assessment by simulation. - Nuno O. Fernandes; Matthias Thürer; Tatiana M. Pinho; Pedro M. B. Torres; Silvio Carmo-Silva (Int. J. Prod. Res., 2020)

Lot synchronization in make-to-order shops with order release control: an assessment by simulation. - Nuno O. Fernandes; Matthias Thürer; Mark Stevenson; Silvio Carmo-Silva (Int. J. Prod. Res., 2020)

The use of finite loading to guide short-term capacity adjustments in make-to-order job shops: an assessment by simulation. - Matthias Thürer; Mark Stevenson (Int. J. Prod. Res., 2020)

A systematic review of China's belt and road initiative: implications for global supply chain management. - Matthias Thürer; Ivan Tomasevic; Mark Stevenson; Constantin Blome; Steven A. Melnyk; Hing Kai Chan; George Q. Huang (Int. J. Prod. Res., 2020)

Worker assignment in dual resource constrained assembly job shops with worker heterogeneity: an assessment by simulation. - Matthias Thürer; Haiwen Zhang; Mark Stevenson; Federica Costa; Lin Ma (Int. J. Prod. Res., 2020)

Approximation Algorithms for a New Truck Loading Problem in Urban Freight Transportation. - Jie Fan; Guoqing Wang; Matthias Thürer (Transp. Sci., 2020)

Digital Twin Architecture for Production Logistics: The Critical Role of Programmable Logic Controllers (PLCs). - Matthias Thürer; Shan Shan Li; Ting Qu (ISM, 2021)

Workload control in additive manufacturing shops where post-processing is a constraint: an assessment by simulation. - Matthias Thürer; Yuan Huang; Mark Stevenson (Int. J. Prod. Res., 2021)

Workload Control order release in general and pure flow shops with limited buffer size induced blocking: an assessment by simulation. - Matthias Thürer; Lin Ma; Mark Stevenson (Int. J. Prod. Res., 2021)

Towards Lean Automation: Fine-Grained sentiment analysis for customer value identification. - Yan Xiao; Congdong Li; Matthias Thürer; Yide Liu; Ting Qu (Comput. Ind. Eng., 2022)

Direct Workload Control: simplifying continuous order release. - Nuno O. Fernandes; Matthias Thürer; Mark Stevenson (Int. J. Prod. Res., 2022)

Production planning and control in multi-stage assembly systems: an assessment of Kanban, MRP, OPT (DBR) and DDMRP by simulation. - Matthias Thürer; Nuno O. Fernandes; Mark Stevenson (Int. J. Prod. Res., 2022)

Order release, dispatching and resource assignment in multiple resource-constrained job shops: an assessment by simulation. - Matthias Thürer; Mark Stevenson (Int. J. Prod. Res., 2022)

Factors for choosing production control systems in make-to-order shops: a systematic literature review. - Fernando José Gómez Paredes; Moacir Godinho Filho; Matthias Thürer; Nuno O. Fernandes; Charbel José Chiappetta Jabbour (J. Intell. Manuf., 2022)

Does Regulating Work-In-Process Increase Throughput and Reduce Cycle Times? An Assessment by Lab Scale System Models. - Matthias Thürer; Shan Shan Li; Can Yang; Ting Qu; George Q. Huang (APMS (3), 2023)

Systems Thinking Approach for Production Process Optimization Based on KPI Interdependencies. - Heiner Winkler; Susanne Franke; Felix Franke; Iren Jabs; Daniel Fischer; Matthias Thürer (APMS (3), 2023)

An integrated spatial-temporal neural network for proactive throughput bottleneck prediction in high-variety shops with complex job routings. - Lin Ma; Ting Qu; Matthias Thürer; Zaoqi Wang; Mingze Yuan; Lei Liu (Int. J. Prod. Res., 2023)

Dynamic planned lead times in production planning and control systems: does the lead time syndrome matter? - Matthias Thürer; Nuno O. Fernandes; Stefan Haeussler; Mark Stevenson (Int. J. Prod. Res., 2023)

Readiness of Brazilian Industrial Engineering postgraduate programs for Industry 4.0: A knowledge dimensions assessment. - Guilherme Luz Tortorella; Paulo A. Cauchick Miguel; Enzo Morosini Frazzon; Flavio S. Fogliatto; Moacir Godinho Filho; Matthias Thürer (Comput. Appl. Eng. Educ., 2023)

A new knowledge-guided multi-objective optimisation for the multi-AGV dispatching problem in dynamic production environments. - Lei Liu; Ting Qu; Matthias Thürer; Lin Ma; Zhongfei Zhang; Mingze Yuan (Int. J. Prod. Res., 2023)

A patent recommendation method based on KG representation learning. - Yan Xiao; Congdong Li; Matthias Thürer (Eng. Appl. Artif. Intell., 2023)

Randomized Local Search on the 2D Rectangular Bin Packing Problem with Item Rotation. - Rui Zhao; Tianyu Liang; Zhize Wu; Daan van den Berg; Matthias Thürer; Thomas Weise 001 (GECCO Companion, 2024)

A Worker-Centric Order Release Method Based on Workload Control: An Assessment by Simulation. - Lin Ma; Mingze Yuan; Ting Qu; Lei Liu; Kai Zhang; Congdong Li; Matthias Thürer (APMS (6), 2024)

Generating Small Instances with Interesting Features for the Traveling Salesperson Problem. - Tianyu Liang; Zhize Wu; Matthias Thürer; Markus Wagner 007; Thomas Weise 001 (IJCCI, 2024)

Randomized Local Search for Two-Dimensional Bin Packing and a Negative Result for Frequency Fitness Assignment. - Rui Zhao; Zhize Wu; Daan van den Berg; Matthias Thürer; Tianyu Liang; Ming Tan; Thomas Weise 001 (IJCCI, 2024)

Exploring barriers to ICT adoption in road freight operations. - Mario Henrique Callefi; Sara Yumi Shiramizu; Luiz Antonio de Carvalho; Matthias Thürer; Syntia Lemos Cotrim; Lucas Daniel Del Rosso Calache (ISM, 2024)

Quality control techniques in additive manufacturing: Current trends and their prototypical implementation. - Daniel Seifert; Pierre Grzona; Keyur Raval; Matthias Thürer (ISM, 2024)

Nesting and scheduling optimization of additive manufacturing systems: Mapping the territory. - Marcelo Pinto; Cristóvão Silva; Matthias Thürer; Samuel Moniz (Comput. Oper. Res., 2024)

Corrected Aggregate Workload approach on order release by considering job's routing position induced variable indirect load. - Mingze Yuan; Lin Ma; Ting Qu; Matthias Thürer; George Q. Huang (Ind. Manag. Data Syst., 2024)

Assessing supply chain responsiveness, resilience and robustness (Triple-R) by computer simulation: a systematic review of the literature. - Pranesh Saisridhar; Matthias Thürer; Balram Avittathur (Int. J. Prod. Res., 2024)

Measuring employee involvement in Lean Manufacturing efforts: proposal of a robust scale. - Nayara Cardoso De Medeiros; Moacir Godinho Filho; Mario Henrique Callefi; Gilberto Miller Devós Ganga; Jonhatan Magno Norte da Silva; Matthias Thürer; Léony Luis Lopes Negrão; Fabiane Leticia Lizarelli (Int. J. Prod. Res., 2025)

Timing and interdependencies in blockchain capabilities development for supply chain management: a resource-based view perspective. - Bruna Lima; Gilberto Miller Devós Ganga; Moacir Godinho Filho; Luis Antonio de Santa-Eulalia; Matthias Thürer; Maciel Manoel Queiroz; Katherine Kaneda Moraes (Ind. Manag. Data Syst., 2025)

A human-centric order release method based on workload control in high-variety make-to-order shops towards Industry 5.0. - Lin Ma; Ray Y. Zhong; Mingze Yuan; Kai Ding; Matthias Thürer; Yanghua Pan; Ting Qu; George Q. Huang (Robotics Comput. Integr. Manuf., 2025)