Inkjet printed System-in-Package design and manufacturing. - Jani Miettinen; Ville Pekkanen; Kimmo Kaija; Pauliina Mansikkamäki; Juha Mäntysalo; Matti Mäntysalo; Juha Niittynen; Jussi Pekkanen; Taavi Saviauk; Risto Rönkkä (Microelectron. J., 2008)

Functional fluid jetting performance optimization. - Ville Pekkanen; Kimmo Kaija; Matti Mäntysalo; Esa Kunnari; Juha Niittynen; Pauliina Mansikkamäki (Microelectron. Reliab., 2010)

A system-on-chip and paper-based inkjet printed electrodes for a hybrid wearable bio-sensing system. - Li Xie; Geng Yang; Matti Mäntysalo; Fredrik Jonsson; Li-Rong Zheng 001 (EMBC, 2012)

Heterogeneous Integration of Bio-Sensing System-on-Chip and Printed Electronics. - Li Xie; Geng Yang; Matti Mäntysalo; Linlin Xu; Fredrik Jonsson; Li-Rong Zheng 001 (IEEE J. Emerg. Sel. Topics Circuits Syst., 2012)

Reliability of ICA attachment of SMDs on inkjet-printed substrates. - Juha Niittynen; Janne Kiilunen; Jussi Putaala; Ville Pekkanen; Matti Mäntysalo; Heli Jantunen; Donald Lupo (Microelectron. Reliab., 2012)

Bio-Patch Design and Implementation Based on a Low-Power System-on-Chip and Paper-Based Inkjet Printing Technology. - Geng Yang; Li Xie; Matti Mäntysalo; Jian Chen 001; Hannu Tenhunen; Li-Rong Zheng 001 (IEEE Trans. Inf. Technol. Biomed., 2012)

Reliability of SMD interconnections on flexible low-temperature substrates with inkjet-printed conductors. - Jussi Putaala; Jari Hannu; Esa Kunnari; Matti Mäntysalo; Olli Nousiainen; Heli Jantunen (Microelectron. Reliab., 2014)

A Health-IoT Platform Based on the Integration of Intelligent Packaging, Unobtrusive Bio-Sensor, and Intelligent Medicine Box. - Geng Yang; Li Xie; Matti Mäntysalo; Xiaolin Zhou; Zhibo Pang; Li Da Xu; Sharon Kao-Walter; Qiang Chen 014; Li-Rong Zheng 001 (IEEE Trans. Ind. Informatics, 2014)

RF measurements to pinpoint defects in inkjet-printed, thermally and mechanically stressed coplanar waveguides. - Sami Myllymäki; Jussi Putaala; Jari Hannu; Esa Kunnari; Matti Mäntysalo (Microelectron. Reliab., 2016)

Soft actuators with screen-printed curvature sensors. - Anastasia Koivikko; Ehsan Sadeghian Raei; Veikko Sariola; Mahmoud Mosallaei; Matti Mäntysalo (IEEE SENSORS, 2017)

Evaluation of screen printed silver trace performance and long-term reliability against environmental stress on a low surface energy substrate. - Riikka Mikkonen; Matti Mäntysalo (Microelectron. Reliab., 2018)

Effect of Different ECG Leads on Estimated R-R Intervals and Heart Rate Variability Parameters. - Vala Jeyhani; Matti Mäntysalo; Kai Noponen; Tapio Seppänen; Antti Vehkaoja (EMBC, 2019)

Unobtrusive, Low-Cost Out-of-Hospital, and In-Hospital Measurement and Monitoring System. - Tiina Vuorinen; Kai Noponen; Vala Jeyhani; Muhammad Awais Aslam; Juhani Junttila; Mikko Tulppo; Kari Sakari Kaikkonen; Heikki Veli Huikuri; Tapio Seppänen; Matti Mäntysalo; Antti Vehkaoja (Adv. Intell. Syst., 2021)

Evaluation of Expandable Microsphere Pressure Sensor for Arterial Pulse Wave Measurements. - Natalia Kanko; Antti Vehkaoja; Mikko Peltokangas; Matti Mäntysalo (SENSORS, 2023)

Detection of abdominal aortic aneurysm using photoplethysmographic signals measured from the index finger. - Mira Haapatikka; Mikko Peltokangas; Saara Pietilä; Sara Protto; Velipekka Suominen; Ilkka Uurto; Damir Vakhitov; Essi Väisänen; Karem Lozano Montero; Mika-Matti Laurila; Jarmo Verho; Matti Mäntysalo; et al. (Biomed. Signal Process. Control., 2025)