Predicting Haptic Data with Support Vector Regression for Telepresence Applications. - Stella M. Clarke; Michael F. Zaeh; J. H. Griebsch (HIS, 2003)

Factory Planning Modules for Knowledge Sharing among Different Locations. - Michael F. Zaeh; Wolfgang Wagner 005 (APMS, 2003)

Planning Mini-Factory Structures for the Close-to-Market Manufacture of Individualized Products. - Michael F. Zaeh; Wolfgang Wagner 005 (MCPC, 2003)

Computer Aided Process Planning as an Enabler for Mass Customization: State of the Art and Future Areas for Research. - Michael F. Zaeh; Henning Rudolf (MCPC, 2003)

Adapted Joining Processes for Mass Customization. - Michael F. Zaeh; Christopher Ulrich (MCPC, 2003)

Disposal of Explosive Ordnances by Use of a Bimanual Haptic Telepresence System. - Alexander Kron; Günther Schmidt 001; Bernd Petzold; Michael F. Zaeh; Peter Hinterseer; Eckehard G. Steinbach (ICRA, 2004)

Virtual Assembly Systems Using Hardware-in-the-Loop-Simulation. - Michael F. Zäh; Georg Wünsch; Ulrich Munzert (SimVis, 2004)

A Study on Visual, Auditory and Haptic Feedback for Assembly Tasks. - Bernd Petzold; Michael F. Zaeh; Berthold Färber; Barbara Deml; Hans Egermeier; Johannes Schilp; Stella M. Clarke (Presence Teleoperators Virtual Environ., 2004)

A virtual scenario to test the influence of an international network and simulated inertia on telepresence performance. - Stella M. Clarke; Franziska K. B. Freyberger; Helena Pongrac; Michael F. Zäh (VECIMS, 2005)

Wandlungsfähige Auftragsabwicklung als Voraussetzung für effizientes Produzieren in Netzwerken. - Horst Wildemann; Michael F. Zäh; Nils Müller; Ulrich Krauß; Markus Loth (Wirtschaftsinformatik, 2005)

A Multilevel Automation Concept for the Target-Based Production of Radioisotopes for Cancer Treatment. - Andreas Eursch; Mark Harfensteller; Michael Schilp; Michael F. Zäh; Josue Moreno; Eva Kabai (CASE, 2006)

Interactive laser-projection for programming industrial robots. - Michael F. Zäh; Wolfgang Vogl (ISMAR, 2006)

Telepresence Across Networks: A Combined Deadband and Prediction Approach. - Michael F. Zaeh; Stella M. Clarke; Peter Hinterseer; Eckehard G. Steinbach (IV, 2006)

Collaborative Telepresent Assembly Strategies. - Andrea Reiter; Michael F. Zäh (ICAT, 2007)

A Neuroergonomic Approach for the Investigation of Cognitive Processes in Interactive Assembly Environments. - Sonja Stork; Christian Stößel; Hermann J. Müller; Mathey Wiesbeck; Michael F. Zäh; Anna Schubö (RO-MAN, 2007)

Generation of circuit and fluid diagrams for mechatronic systems. - Michael F. Zaeh; Florian Graetz (Prod. Eng., 2007)

Systematic workplace and assembly redesign for aging workforces. - Michael F. Zaeh; Martin Prasch (Prod. Eng., 2007)

A new systematic classification of influences on thermal production processes for mechanical simulations. - Michael F. Zaeh; Sven Roeren (Prod. Eng., 2007)

The Effects of Simulated Inertia and Force Prediction on Delayed Telepresence. - Stella M. Clarke; Gerhard Schillhuber; Michael F. Zaeh; Heinz Ulbrich (Presence Teleoperators Virtual Environ., 2007)

Einsatz eines Physikmodells zur Simulation des Materialflusses einer Produktionsanlage (Application of a Physical Model for the Simulation of the Material Flow of a Manufacturing Plant). - Michael F. Zäh; Michael Spitzweg; Frédéric-Felix Lacour (it Inf. Technol., 2008)

Prediction-based methods for teleoperation across delayed networks. - Stella M. Clarke; Gerhard Schillhuber; Michael F. Zaeh; Heinz Ulbrich (Multim. Syst., 2008)

Development of a robust laser beam bending process for aluminum fuselage structures. - Michael F. Zaeh; Tobias Hornfeck (Prod. Eng., 2008)

Model-driven development of PLC software for machine tools. - Michael F. Zaeh; Clemens Poernbacher (Prod. Eng., 2008)

Simulation of the manufacturing process chain of welded frame structures. - Michael F. Zaeh; Loucas Papadakis; Mirko Langhorst (Prod. Eng., 2008)

Die Ingenieurpromotion heute - Auslaufmodell oder doch ein Renner? - Michael F. Zäh; Andreas Trautmann (Zukunft Ingenieurwissenschaften, 2008)

Safety Aspects in a Human-Robot Interaction Scenario: A Human Worker Is Co-operating with an Industrial Robot. - Michael F. Zäh; Wolfgang Rösel (FIRA, 2009)

Finding Relevant Items: Attentional Guidance Improves Visual Selection Processes. - Sonja Stork; Isabella Hild; Mathey Wiesbeck; Michael F. Zaeh; Anna Schubö (USAB, 2009)

The effect of scanning strategies on electron beam sintering. - Michael F. Zaeh; Markus Kahnert (Prod. Eng., 2009)

Implementation of a process and structure model for turning operations. - Michael F. Zäh; Florian Schwarz (Prod. Eng., 2009)

Integrated simulation of the process chain composite extrusion-milling-welding for lightweight frame structures. - Michael F. Zaeh; A. Erman Tekkaya; Dirk Biermann; Andreas Zabel; Mirko Langhorst; Alexander Schober; Thomas Kloppenborg; Markus Steiner; Eduard Ungemach (Prod. Eng., 2009)

Experimental and numerical investigation of the process chain from composite extrusion to friction stir welding regarding the residual stresses in composite extruded profiles. - Michael F. Zäh; A. Erman Tekkaya; Mirko Langhorst; M. Ruhstorfer; Alexander Schober; D. Pietzka (Prod. Eng., 2009)

A multi-dimensional measure for determining the complexity of manual assembly operations. - Michael F. Zaeh; Mathey Wiesbeck; Sonja Stork; Anna Schubö (Prod. Eng., 2009)

Experimental and numerical identification of process parameters of grind-hardening and resulting part distortions. - Michael F. Zäh; Ekkard Brinksmeier; Carsten Heinzel; Jens-Walter Huntemann; Tobias Föckerer (Prod. Eng., 2009)

Form-flexible tools for injection molding: approach for the economic application of injection molding for small lot sizes. - Michael F. Zäh; Florian Hagemann; Stefan Teufelhart (Prod. Eng., 2009)

Telepresence Technology for Production: From Manual to Automated Assembly. - Marwan Radi; Andrea Reiter; Michael F. Zäh; Thomas Müller 001; Alois C. Knoll (EuroHaptics (1), 2010)

High-fidelity telepresence and teleaction. - Robert Bauernschmitt; Martin Buss; Barbara Deml; Klaus Diepold; Berthold Färber; Georg Färber; Ulrich Hagn; Gerd Hirzinger; Sandra Hirche; Alois C. Knoll; Hermann J. Müller; Tobias Ortmaier; et al. (ICRA, 2010)

Analysis of the Accuracy of Industrial Robots and Laser Scanners for Remote Laser BeamWelding and Cutting. - Michael F. Zaeh; Jens Hatwig; Jan Musiol; Oliver Roesch; Gunther Reinhart (ISR/ROBOTIK, 2010)

A holistic approach for the cognitive control of production systems. - Michael F. Zaeh; Gunther Reinhart; Martin Ostgathe; Florian Geiger; Christian Lau (Adv. Eng. Informatics, 2010)

Automated task planning for industrial robots and laser scanners for remote laser beam welding and cutting. - Jens Hatwig; Gunther Reinhart; Michael F. Zäh (Prod. Eng., 2010)

Dynamical behaviour of machine tools during friction stir welding. - Michael F. Zäh; Paul Gebhard (Prod. Eng., 2010)

Three-dimensional friction stir welding using a high payload industrial robot. - Michael F. Zaeh; Georg Voellner (Prod. Eng., 2010)

Investigations on residual stresses and deformations in selective laser melting. - Michael F. Zäh; Gregor Branner (Prod. Eng., 2010)

Modelling and simulation of electron beam melting. - Michael F. Zäh; S. Lutzmann (Prod. Eng., 2010)

Cyclic influences within the production resource planning process. - Michael F. Zäh; Gunther Reinhart; Florian Karl; Sebastian Schindler; Johannes Pohl; Christoph Rimpau (Prod. Eng., 2010)

Analysis of information flows at interfaces between strategic product planning, product development and production planning to support process management - A literature based approach. - Florian G. H. Behncke; Frank Gabriel; Stefan Langer; Clemens Hepperle; Udo Lindemann; Florian Karl; Johannes Pohl; Sebastian Schindler; Gunther Reinhart; Michael F. Zaeh (SMC, 2011)

Prediction of the dynamic behaviour of machine tools during the design process using mechatronic simulation models based on finite element analysis. - Michael F. Zäh; Marcus Hennauer (Prod. Eng., 2011)

Characteristic line emissions of the metal vapour during laser beam welding. - Michael F. Zäh; Sonja Huber (Prod. Eng., 2011)

Vibrations in friction welding. - Michael F. Zäh; Axel Pöhler (Prod. Eng., 2011)

Development of a Simulation-Based Process Chain - Strategy for Different Levels of Detail for the Preprocessing Definitions. - Toni A. Krol; Sebastian Westhäuser; Michael F. Zäh; Johannes Schilp; G. Groth (Simul. Notes Eur., 2011)

Artificial Cognition in Production Systems. - Alexander Bannat; Thibault Bautze; Michael Beetz; Jürgen Blume; Klaus Diepold; Christoph Ertelt; Florian Geiger; Thomas Gmeiner; Tobias Gyger; Alois C. Knoll; Christian Lau; Claus Lenz; et al. (IEEE Trans Autom. Sci. Eng., 2011)

Robots Assisting in the Packaging Industry. - Frank Wallhoff; Jürgen Blume; Alexander Bannat; Ben Appleton; Wolfgang Rösel; Carola Zwicker; Michael F. Zäh; Gunther Reinhart; Andreas Pichler; Paolo Ferrara; Robert Behrndt (ROBOTIK, 2012)

Experimental Evaluation of the Thermal Machine Tool Behavior for Model Updating. - Jörg Franke; Tobias Maier; Franziska Schäfer; Michael F. Zaeh (Int. J. Autom. Technol., 2012)

Experimental and numerical analysis of transient behavior during grind-hardening of AISI 52100. - Tobias Föckerer; Benjamin Kolkwitz; Carsten Heinzel; Michael F. Zaeh (Prod. Eng., 2012)

Reliable material damping ratio determination in machine tool structures. - Klemens Konrad Niehues; S. Schwarz; Michael F. Zäh (Prod. Eng., 2012)

System for product-based control of production processes. - Martin Ostgathe; Michael F. Zaeh (CIPLS, 2013)

Integration of heat treatment into the process chain of a mill turn center by enabling external cylindrical grind-hardening. - Gregory A. Hyatt; Masahiko Mori; Tobias Föckerer; Michael F. Zaeh; Nils Niemeyer; Michael Duscha (Prod. Eng., 2013)

Identification and evaluation of uncertainties and errors in dynamic models of casted machine tool components. - Stefan Schwarz; A. Sing; Michael F. Zaeh (Prod. Eng., 2014)

Improvement of the machining accuracy of milling robots. - Michael F. Zaeh; Oliver Roesch (Prod. Eng., 2014)

Integrated Requirements and Systems Modeling in the Mechatronic Development Process. - Christoph Richter; Georg Hackenberg; Michael F. Zäh; Gunther Reinhart (DeSE, 2015)

Identifying the Benefits of Fiber Reinforced Plastics for Their Use in Machine Tool Structures. - Conrad W. P. Fischbach; Michael F. Zaeh; Martin Mair (Int. J. Autom. Technol., 2015)

Improvement of the Static and Dynamic Behavior of a Milling Robot. - Michael Friedrich Zäh; Oliver Roesch (Int. J. Autom. Technol., 2015)

Laser beam welding of electrical contacts of lithium-ion batteries for electric- and hybrid-electric vehicles. - Philipp A. Schmidt; Michael F. Zaeh (Prod. Eng., 2015)

A fully adaptive rational global Arnoldi method for the model-order reduction of second-order MIMO systems with proportional damping. - Thomas Bonin; Heike Faßbender; Andreas Soppa; Michael F. Zäh (Math. Comput. Simul., 2016)

Automated heat source calibration for the numerical simulation of laser beam welded components. - A. Belitzki; C. Marder; A. Huissel; Michael F. Zäh (Prod. Eng., 2016)

Friction in feed drives of machine tools: investigation, modeling and validation. - Christian Rebelein; Michael F. Zaeh (Prod. Eng., 2016)

Dynamics enhancement of galvanometer laser scanners by adaptive inverse control. - Sebastian J. Pieczona; Simon Zollitsch; Michael F. Zaeh (AIM, 2017)

A methodology for areal modeling of structural dynamics based on a Takagi-Sugeno fuzzy system. - Sebastian J. Pieczona; Michael F. Zäh (Prod. Eng., 2017)

Modeling of the dynamic behavior of machine tools: influences of damping, friction, control and motion. - Christian Rebelein; J. Vlacil; Michael F. Zäh (Prod. Eng., 2017)

Assessment of the technological potential and maturity of a novel joining technique based on reactive nanofoils. - Georgios D. Theodossiadis; Michael F. Zaeh (Prod. Eng., 2017)

Study of the kinetic and energetic reaction properties of multilayered aluminum-nickel nanofoils. - Georgios D. Theodossiadis; Michael F. Zaeh (Prod. Eng., 2017)

In-situ investigation of the thermal reaction properties of multilayered aluminum-nickel nanofoils. - Georgios D. Theodossiadis; Michael F. Zaeh (Prod. Eng., 2017)

Study of the heat affected zone within metals joined by using reactive multilayered aluminum-nickel nanofoils. - Georgios D. Theodossiadis; Michael F. Zaeh (Prod. Eng., 2017)

Erratum to: Study of the kinetic and energetic reaction properties of multilayered aluminum-nickel nanofoils. - Georgios D. Theodossiadis; Michael F. Zaeh (Prod. Eng., 2017)

Adaptive Active Vibration Control for Machine Tools with Highly Position-Dependent Dynamics. - Robin Kleinwort; Jonathan Platz; Michael F. Zaeh (Int. J. Autom. Technol., 2018)

Simulation-Based Dimensioning of the Required Actuator Force for Active Vibration Control. - Robin Kleinwort; Philipp Weishaupt; Michael F. Zaeh (Int. J. Autom. Technol., 2018)

Editorial: Active and Passive Vibration Damping in Machine Tools. - Michael F. Zaeh (Int. J. Autom. Technol., 2018)

Special issue on 'Cyber-physical product creation for Industry 4.0'. - Aydin Nassehi; Dirk Schaefer; Dazhong Wu; Xun Xu 001; Michael F. Zaeh (Int. J. Comput. Integr. Manuf., 2018)

Parameterized Extended Finite Element Method for high thermal gradients. - Christian Zeller; Binu Surendran; Michael F. Zaeh (J. Comput. Des. Eng., 2018)

Torque-based adaptive temperature control in friction stir welding: a feasibility study. - Andreas Bachmann; M. Roehler; Sebastian J. Pieczona; M. Kessler; Michael F. Zäh (Prod. Eng., 2018)

A cutting force model for finishing processes using helical end mills with significant runout. - Sepp Wimmer; Johannes Ellinger; Michael F. Zaeh (Prod. Eng., 2018)

Estimating remaining useful life of machine tool ball screws via probabilistic classification. - Maximilian Benker; Robin Kleinwort; Michael F. Zäh (ICPHM, 2019)

A Smoothed Particle Hydrodynamics Model for Laser Beam Melting of Ni-based Alloy 718. - Johannes Weirather; Vladyslav Rozov; Mario Wille; Paul Schuler; Christian Seidel; Nikolaus A. Adams; Michael F. Zaeh (Comput. Math. Appl., 2019)

Characterization of Energy Consumers in Production Systems with Renewable On-Site Power Generation. - Julia Schulz; Felix Rosenberg; Valerie M. Scharmer; Michael F. Zaeh (APMS (1), 2020)

A Gaussian Process Based Method for Data- Efficient Remaining Useful Life Estimation. - Maximilian Benker; Artem Bliznyuk; Michael F. Zaeh (IEEE Access, 2021)

Sequence Scrambling in Aggregated Mixed-Model Production Line Modeling. - Sebastian Kroeger; Svenja Korder; Robin Schneider; Michael F. Zaeh (WSC, 2022)

Methodology for model-based uncertainty quantification of the vibrational properties of machining robots. - Maximilian Busch; Florian Schnoes; Amr Elsharkawy; Michael F. Zaeh (Robotics Comput. Integr. Manuf., 2022)

Multi-Fidelity Information Fusion to Model the Position-Dependent Modal Properties of Milling Robots. - Maximilian Busch; Michael F. Zaeh (Robotics, 2022)

Towards Additively Manufactured Metamaterials with Powder Inclusions for Controllable Dissipation: The Critical Influence of Packing Density. - Patrick M. Praegla; Thomas Mair; Andreas Wimmer; Sebastian L. Fuchs; Niklas Fehn; Michael F. Zaeh; Wolfgang A. Wall; Christoph Meier 001 (CoRR, 2023)

Development Of A Comprehensive Description Model For Manufacturing Changes. - Jan-Philipp Rammo; Nerma Custovic; Michael F. Zaeh (IEEM, 2024)

Segmentation-based closed-loop layer height control for enhancing stability and dimensional accuracy in wire-based laser metal deposition. - Christian Bernauer; Philipp Leitner 004; Avelino Zapata; Pawel Garkusha; Sophie Grabmann; Maximilian Schmoeller; Michael F. Zaeh (Robotics Comput. Integr. Manuf., 2024)

Long living human-machine systems in construction and production enabled by digital twins: Exploring applications, challenges, and pathways to sustainability. - Birgit Vogel-Heuser; Fandi Hartl; Moritz Wittemer; Jingyun Zhao; Andreas Mayr; Martin Fleischer; Theresa Prinz; Anne Fischer; Jakob Trauer; Philipp Schroeder 002; Ann-Kathrin Goldbach; Florian Rothmeyer; et al. (Autom., 2024)

Regional marketing mechanisms for industrial energy flexibility enabled by service-oriented IT platforms. - Valerie M. Scharmer; Lukas Bank; Stephanie Halbrügge; Leon Haupt; Jana Köberlein; Stefan Roth 006; Julia Schulz; Susanne Vernim; Martin Weibelzahl; Hans Ulrich Buhl; Johannes Schilp; Michael F. Zaeh (Autom., 2024)