Analytical modeling of split-phase synchronous reluctance machines. - Alberto Tessarolo; Claudio Bruzzese; Michele Degano; Lorenzo Branz (IECON, 2014)

End barrier shape optimizations and sensitivity analysis of synchrnous reluctance machines. - Mauro Di Nardo; Michele Degano; Michael Galea; Chris Gerada; Marco Palmieri; Francesco Cupertino; Nicola Bianchi; David Gerada (IECON, 2015)

Trade-off analysis and design of a high power density PM machine for flooded industrial pump. - Ahmed Al-Timimy; Michele Degano; Zeyuan Xu; Giovanni Lo Calzo; Paolo Giangrande; Michael Galea; Chris Gerada; He Zhang 013; L. Xia (IECON, 2016)

Comparison of flux observers for sensorless control of permanent magnet assisted SynRel motors. - Luca Concari; Andrea Toscani; Davide Barater; Carlo Concari; Michele Degano; Gianmario Pellegrino (IECON, 2016)

The impact of impulsive voltage waveforms on the electrical insulation of actuators for more electrical aircraft (MEA). - Luca Lusaurdi; Andrea Cavallini 002; Michele Degano (IECON, 2017)

Improved Damper Cage Design for Salient-Pole Synchronous Generators. - Stefano Nuzzo; Michele Degano; Michael Galea; Chris Gerada; David Gerada; Neil L. Brown (IEEE Trans. Ind. Electron., 2017)

Multi-Port Power Conversion Systems for the More Electric Aircraft. - Chunyang Gu; He Zhang 013; Giampaolo Buticchi; Giacomo Sala; Alessandro Galassini; Savvas Papadopoulos; Michele Degano (IECON, 2018)

Solid-Rotor Material Selection for Squirrel-Cage High-Speed Solid-Rotor Induction Machine. - Pia Lindh; Paula Immonen; Chong Di 002; Michele Degano; Juha Pyrhönen (IECON, 2019)

SMART: Modular Architecture for Reliable Transportation. - Savvas Papadopoulos; Alessandro Galassini; Laimonas Ruksnaitis; Nabilah Farhat; Oleh Kiselychnyk; William J. B. Midgley; Michele Degano (IECON, 2019)

Enhanced Power Sharing Transient With Droop Controllers for Multithree-Phase Synchronous Electrical Machines. - Alessandro Galassini; Alessandro Costabeber; Michele Degano; Chris Gerada; Alberto Tessarolo; Roberto Menis (IEEE Trans. Ind. Electron., 2019)

A Resolver-to-Digital Conversion Method Based on Third-Order Rational Fraction Polynomial Approximation for PMSM Control. - Shuo Wang 022; Jinsong Kang; Michele Degano; Giampaolo Buticchi (IEEE Trans. Ind. Electron., 2019)

Influence of Optimisation Target Functions on Synchronous Reluctance Machines Design. - Oguz Korman; Mauro Di Nardo; Michele Degano; Chris Gerada (IECON, 2020)

Rectangular and Random Conductors: AC Losses Evaluations and Manufacturing Considerations. - Eraldo Preci; Giorgio Valente; Anuvav Bardalai; Tommaso Transi; Tianjie Zou; David Gerada; Michele Degano; Giampaolo Buticchi; Christopher Gerada (IECON, 2020)

Influence of Rotor Design on Electromagnetic Performance in Interior Permanent Magnet Machines. - Tommaso Transi; Mukhammed Murataliyev; Michele Degano; Eraldo Preci; David Gerada; Chris Gerada (IECON, 2020)

A Novel Concept of Ribless Synchronous Reluctance Motor for Enhanced Torque Capability. - Yuli Bao; Michele Degano; Shuo Wang 022; Liu Chuan; He Zhang 013; Zhuang Xu; Chris Gerada (IEEE Trans. Ind. Electron., 2020)

Control Strategy for Five-Phase Dual-Stator Winding Induction Starter/Generator System. - Haozhe Liu; Feifei Bu; Wenxin Huang; Lu Liu; Yuwen Hu; Michele Degano; Chris Gerada (IEEE Trans. Ind. Electron., 2020)

An Accurate Wide-Speed Range Control Method of IPMSM Considering Resistive Voltage Drop and Magnetic Saturation. - Shuo Wang 022; Jinsong Kang; Michele Degano; Alessandro Galassini; Chris Gerada (IEEE Trans. Ind. Electron., 2020)

Influence of the Magnetic Load on High Speed Synchronous Reluctance Machines Design. - Gianvito Gallicchio; Marco Palmieri; Francesco Cupertino; Mauro Di Nardo; Michele Degano; Chris Gerada (IECON, 2021)

Modelling of Voltage Distribution within Hairpin Windings. - Eraldo Preci; Stefano Nuzzo; Davide Barater; David Gerada; Michele Degano; Giampaolo Buticchi; Christopher Gerada (IECON, 2021)

Speed Ripple Reduction of Direct-Drive PMSM Servo System at Low-Speed Operation Using Virtual Cogging Torque Control Method. - Feifei Bu; Zhida Yang; Yu Gao; Zihao Pan; Tianyu Pu; Michele Degano; Chris Gerada (IEEE Trans. Ind. Electron., 2021)

A Novel Sizing Approach for Synchronous Reluctance Machines. - Mukhammed Murataliyev; Michele Degano; Michael Galea (IEEE Trans. Ind. Electron., 2021)

A Digital Internal Model Current Controller for Salient Machines. - Ivan Z. Petric; Slobodan N. Vukosavic; Michele Degano; Alessandro Galassini (IEEE Trans. Ind. Electron., 2021)

Power-Sharing Control in Bearingless Multi-Sector and Multi-Three-Phase Permanent Magnet Machines. - Giacomo Sala; Giorgio Valente; Mauro Di Nardo; Michele Degano; Pericle Zanchetta; Chris Gerada (IEEE Trans. Ind. Electron., 2021)

Research and Realization of High-Power Medium-Voltage Active Rectifier Concepts for Future Hybrid-Electric Aircraft Generation. - Andrew Trentin; Giacomo Sala; Luca Tarisciotti; Alessandro Galassini; Michele Degano; Peter H. Connor; Dmitry Golovanov; David Gerada; Zeyuan Xu; Antonino la Rocca; Carol N. Eastwick; Stephen J. Pickering; et al. (IEEE Trans. Ind. Electron., 2021)

Improved Model Predictive Current Control for SPMSM Drives Using Current Update Mechanism. - Xin Yuan 007; Shuo Zhang; Chengning Zhang; Alessandro Galassini; Giampaolo Buticchi; Michele Degano (IEEE Trans. Ind. Electron., 2021)

Synchronous Reluctance Machines: A Comprehensive Review and Technology Comparison. - Mukhammed Murataliyev; Michele Degano; Mauro Di Nardo; Nicola Bianchi; Chris Gerada (Proc. IEEE, 2022)

Modular Power Sharing Control for Bearingless Multithree Phase Permanent Magnet Synchronous Machine. - Zhuang Wen; Mauro Di Nardo; Giacomo Sala; Giorgio Valente; Alessandro Marfoli; Michele Degano; Pericle Zanchetta; Chris Gerada (IEEE Trans. Ind. Electron., 2022)

Fast Assessment of Rotor Barrier Dimensional Allowances in Synchronous Reluctance Machines. - Carlos Madariaga; Cesar Gallardo; Juan A. Tapia; Werner Jara; Andrés Escobar; Michele Degano (IEEE Access, 2023)

Modeling Air Pressure Impact on PDIV for Rectangular Wire Turn-to-Turn Insulation of Inverter-Fed Motors Under Different Voltage Waveform Excitations. - Hadi Naderiallaf; Michele Degano; Christopher Gerada (IEEE Access, 2024)

Additive Manufacturing of Nd-Fe-B Permanent Magnets and Their Application in Electrical Machines. - Julan Wu; Oguz Korman; Mauro Di Nardo; Michele Degano; Chris Gerada; Ian Ashcroft; Richard J. M. Hague; Nesma T. Aboulkhair (IEEE Access, 2024)