Min Xie
Orcid: 0000-0002-8500-8364Affiliations:
- National University of Singapore, Singapore
- City University of Hong Kong, System Engineering and Engineering Management, Hong Kong
- Linköping University, Sweden (PhD 1987)
According to our database1,
Min Xie
authored at least 233 papers
between 1991 and 2024.
Collaborative distances:
Collaborative distances:
Timeline
Legend:
Book In proceedings Article PhD thesis Dataset OtherLinks
Online presence:
-
on zbmath.org
-
on scopus.com
-
on orcid.org
-
on cityu.edu.hk
On csauthors.net:
Bibliography
2024
IEEE Trans. Reliab., March, 2024
A Semi-Supervised Failure Knowledge Graph Construction Method for Decision Support in Operations and Maintenance.
IEEE Trans. Ind. Informatics, March, 2024
Robust Degradation State Identification in the Presence of Parameter Uncertainty and Outliers.
IEEE Trans. Ind. Informatics, February, 2024
Variational AutoEncoders-LSTM based fault detection of time-dependent high dimensional processes.
Int. J. Prod. Res., February, 2024
Dynamic Probability-Density-Dependent Event-Triggered $\mathcal {L}_{\infty }$ LFC for Power Systems Subject to Stochastic Delays.
IEEE Trans. Netw. Sci. Eng., 2024
2023
Robust Statistical Modeling of Heterogeneity for Repairable Systems Using Multivariate Gaussian Convolution Processes.
IEEE Trans. Reliab., December, 2023
Attention-aware temporal-spatial graph neural network with multi-sensor information fusion for fault diagnosis.
Knowl. Based Syst., October, 2023
QoS-Dependent Event-Triggered Control for UAVs on Cognitive Radio Networks Subject to Deception Attacks.
IEEE Trans. Veh. Technol., September, 2023
An Overview of Adaptive-Surrogate-Model-Assisted Methods for Reliability-Based Design Optimization.
IEEE Trans. Reliab., September, 2023
Sequential Bayesian Planning for Accelerated Degradation Tests Considering Sensor Degradation.
IEEE Trans. Reliab., September, 2023
Multi-Sensor Graph Transfer Network for Health Assessment of High-Speed Rail Suspension Systems.
IEEE Trans. Intell. Transp. Syst., September, 2023
A power model considering initial battery state for remaining useful life prediction of lithium-ion batteries.
Reliab. Eng. Syst. Saf., September, 2023
Resilience assessment methodology of natural gas network system under random leakage.
Reliab. Eng. Syst. Saf., June, 2023
IEEE Trans Autom. Sci. Eng., April, 2023
Recognition of abnormal patterns in industrial processes with variable window size via convolutional neural networks and AdaBoost.
J. Intell. Manuf., April, 2023
Development of an Adversarial Transfer Learning-Based Soft Sensor in Industrial Systems.
IEEE Trans. Instrum. Meas., 2023
Profile Abstract: An Optimization-Based Subset Selection and Summarization Method for Profile Data Mining.
IEEE Trans. Ind. Informatics, 2023
Multivariate Time-Series Prediction in Industrial Processes via a Deep Hybrid Network Under Data Uncertainty.
IEEE Trans. Ind. Informatics, 2023
Multitype Optimal Component Allocation of Multicomponent Systems Considering Fuzzy State.
IEEE Trans. Fuzzy Syst., 2023
Reliab. Eng. Syst. Saf., 2023
Empowering ChatGPT-Like Large-Scale Language Models with Local Knowledge Base for Industrial Prognostics and Health Management.
CoRR, 2023
2022
A Supervised Bidirectional Long Short-Term Memory Network for Data-Driven Dynamic Soft Sensor Modeling.
IEEE Trans. Instrum. Meas., 2022
Adaptive testing policy for multi-state systems with application to the degrading final elements in safety-instrumented systems.
Reliab. Eng. Syst. Saf., 2022
Performance modeling for condition-based activation of the redundant safety system subject to harmful tests.
Reliab. Eng. Syst. Saf., 2022
Degradation analysis with nonlinear exponential-dispersion process: Bayesian offline and online perspectives.
Qual. Reliab. Eng. Int., 2022
Product quality monitoring approach considering non-geometric dimensioning data with rapid production process simulation.
Int. J. Prod. Res., 2022
2021
A Switching Method to Event-Triggered Output Feedback Control for Unmanned Aerial Vehicles Over Cognitive Radio Networks.
IEEE Trans. Syst. Man Cybern. Syst., 2021
Resilient Critical Infrastructure Planning Under Disruptions Considering Recovery Scheduling.
IEEE Trans. Engineering Management, 2021
Remaining useful life prediction and predictive maintenance strategies for multi-state manufacturing systems considering functional dependence.
Reliab. Eng. Syst. Saf., 2021
Qual. Reliab. Eng. Int., 2021
IEEE J. Sel. Top. Signal Process., 2021
Improved event-triggered control for networked control systems subject to deception attacks.
J. Frankl. Inst., 2021
Dynamic event-triggered L∞ control for networked control systems under deception attacks: a switching method.
Inf. Sci., 2021
Dynamic random testing with test case clustering and distance-based parameter adjustment.
Inf. Softw. Technol., 2021
IISE Trans., 2021
A model-based reinforcement learning approach for maintenance optimization of degrading systems in a large state space.
Comput. Ind. Eng., 2021
Monitoring scheme for early detection of coronavirus and other respiratory virus outbreaks.
Comput. Ind. Eng., 2021
Proceedings of the 6th IEEE International Conference on Computer and Communication Systems, 2021
2020
IEEE Trans. Reliab., 2020
Adaptive Event-Triggered Observer-Based Output Feedback ℒ<sub>∞</sub> Load Frequency Control for Networked Power Systems.
IEEE Trans. Ind. Informatics, 2020
Stochastic Filtering Approach for Condition-Based Maintenance Considering Sensor Degradation.
IEEE Trans Autom. Sci. Eng., 2020
Planning accelerated reliability tests for mission-oriented systems subject to degradation and shocks.
IISE Trans., 2020
On dynamically monitoring aggregate warranty claims for early detection of reliability problems.
IISE Trans., 2020
Eur. J. Oper. Res., 2020
2019
IEEE Trans. Reliab., 2019
Development of RVM-Based Multiple-Output Soft Sensors With Serial and Parallel Stacking Strategies.
IEEE Trans. Control. Syst. Technol., 2019
Qual. Reliab. Eng. Int., 2019
On optimal upgrade strategy for second-hand multi-component systems sold with warranty.
Int. J. Prod. Res., 2019
Optimal preventive maintenance strategy for leased equipment under successive usage-based contracts.
Int. J. Prod. Res., 2019
Optimal inspection and replacement policy based on experimental degradation data with covariates.
IISE Trans., 2019
Comput. Ind. Eng., 2019
A comparative study of some EWMA schemes for simultaneous monitoring of mean and variance of a Gaussian process.
Comput. Ind. Eng., 2019
Proceedings of the 19th IEEE International Conference on Software Quality, 2019
2018
A Mixture of Variational Canonical Correlation Analysis for Nonlinear and Quality-Relevant Process Monitoring.
IEEE Trans. Ind. Electron., 2018
Utilizing experimental degradation data for warranty cost optimization under imperfect repair.
Reliab. Eng. Syst. Saf., 2018
Availability-based engineering resilience metric and its corresponding evaluation methodology.
Reliab. Eng. Syst. Saf., 2018
J. Appl. Probab., 2018
A univariate procedure for monitoring location and dispersion with ordered categorical data.
Commun. Stat. Simul. Comput., 2018
Commun. Stat. Simul. Comput., 2018
Optimal condition-based maintenance policy with delay for systems subject to competing failures under continuous monitoring.
Comput. Ind. Eng., 2018
A Study of the Extraction of Bug Judgment and Correction Times from Open Source Software Bug Logs.
Proceedings of the 2018 IEEE International Conference on Software Quality, 2018
Proceedings of the 2018 IEEE International Symposium on Software Reliability Engineering Workshops, 2018
Proceedings of the 2018 IEEE International Conference on Prognostics and Health Management, 2018
2017
IEEE Trans. Reliab., 2017
An Ameliorated Improvement Factor Model for Imperfect Maintenance and Its Goodness of Fit.
Technometrics, 2017
Modeling and Analysis of the Reliability of Digital Networked Control Systems Considering Networked Degradations.
IEEE Trans Autom. Sci. Eng., 2017
A Dynamic-Bayesian-Network-Based Fault Diagnosis Methodology Considering Transient and Intermittent Faults.
IEEE Trans Autom. Sci. Eng., 2017
Applying Importance Measures to Risk Analysis in Engineering Project Using a Risk Network Model.
IEEE Syst. J., 2017
Condition-based maintenance for systems with aging and cumulative damage based on proportional hazards model.
Reliab. Eng. Syst. Saf., 2017
A Study of Control Chart for Monitoring Exponentially Distributed Characteristics Based On Type-II Censored Samples.
Qual. Reliab. Eng. Int., 2017
A condition-based maintenance policy for degrading systems with age- and state-dependent operating cost.
Eur. J. Oper. Res., 2017
Comput. Ind. Eng., 2017
Comput. Ind. Eng., 2017
Performance and reliability improvement of cyber-physical systems subject to degraded communication networks through robust optimization.
Comput. Ind. Eng., 2017
2016
A Dynamic Approach to Performance Analysis and Reliability Improvement of Control Systems With Degraded Components.
IEEE Trans. Syst. Man Cybern. Syst., 2016
Qual. Reliab. Eng. Int., 2016
Qual. Reliab. Eng. Int., 2016
Qual. Reliab. Eng. Int., 2016
Design and Implementation of Two CUSUM Schemes for Simultaneously Monitoring the Process Mean and Variance with Unknown Parameters.
Qual. Reliab. Eng. Int., 2016
Qual. Reliab. Eng. Int., 2016
Modeling and analysis of reliability of multi-release open source software incorporating both fault detection and correction processes.
J. Syst. Softw., 2016
A fuzzy TOPSIS and Rough Set based approach for mechanism analysis of product infant failure.
Eng. Appl. Artif. Intell., 2016
Commun. Stat. Simul. Comput., 2016
A study of interval analysis for cold-standby system reliability optimization under parameter uncertainty.
Comput. Ind. Eng., 2016
An imperfect maintenance policy for mission-oriented systems subject to degradation and external shocks.
Comput. Ind. Eng., 2016
2015
Qual. Reliab. Eng. Int., 2015
Qual. Reliab. Eng. Int., 2015
An empirical analysis of data preprocessing for machine learning-based software cost estimation.
Inf. Softw. Technol., 2015
Int. J. Gen. Syst., 2015
Degradation-based maintenance decision using stochastic filtering for systems under imperfect maintenance.
Eur. J. Oper. Res., 2015
Optimal resource distribution between protection and redundancy considering the time and uncertainties of attacks.
Eur. J. Oper. Res., 2015
Cost analysis for multi-component system with failure interaction under renewing free-replacement warranty.
Eur. J. Oper. Res., 2015
A New Framework and Application of Software Reliability Estimation Based on Fault Detection and Correction Processes.
Proceedings of the 2015 IEEE International Conference on Software Quality, 2015
An Empirical Study of Dynamic Incomplete-Case Nearest Neighbor Imputation in Software Quality Data.
Proceedings of the 2015 IEEE International Conference on Software Quality, 2015
Proceedings of the 21st IEEE Pacific Rim International Symposium on Dependable Computing, 2015
Optimal wind capacity integration considering the possibilistic uncertainty of wind resources.
Proceedings of the 2015 IEEE Innovative Smart Grid Technologies, 2015
Proceedings of the 2015 IEEE International Conference on Industrial Engineering and Engineering Management, 2015
Proceedings of the 2015 IEEE International Conference on Industrial Engineering and Engineering Management, 2015
Modeling and Reliability Analysis of Digital Networked Systems Subject to Degraded Communication Networks.
Proceedings of the Theory and Engineering of Complex Systems and Dependability - Proceedings of the Tenth International Conference on Dependability and Complex Systems DepCoS-RELCOMEX, June 29, 2015
2014
IEEE Trans. Reliab., 2014
Technometrics, 2014
A value-based preventive maintenance policy for multi-component system with continuously degrading components.
Reliab. Eng. Syst. Saf., 2014
Dynamic availability assessment and optimal component design of multi-state weighted k-out-of-n systems.
Reliab. Eng. Syst. Saf., 2014
Qual. Reliab. Eng. Int., 2014
Qual. Reliab. Eng. Int., 2014
Dynamic modeling of general three-state k-out-of-n: G systems: Permanent-based computational results.
J. Comput. Appl. Math., 2014
Int. J. Syst. Sci., 2014
Eur. J. Oper. Res., 2014
Lower confidence limit for reliability based on grouped data using a quantile-filling algorithm.
Comput. Stat. Data Anal., 2014
Comput. Ind. Eng., 2014
Comput. Ind. Eng., 2014
Proceedings of the 2014 IEEE International Conference on Industrial Engineering and Engineering Management, 2014
2013
A Bivariate Maintenance Policy for Multi-State Repairable Systems With Monotone Process.
IEEE Trans. Reliab., 2013
A Bayesian Approach for System Reliability Analysis With Multilevel Pass-Fail, Lifetime and Degradation Data Sets.
IEEE Trans. Reliab., 2013
An Integrated Framework for Risk Response Planning Under Resource Constraints in Large Engineering Projects.
IEEE Trans. Engineering Management, 2013
Reliab. Eng. Syst. Saf., 2013
Reliab. Eng. Syst. Saf., 2013
Life cycle reliability assessment of new products - A Bayesian model updating approach.
Reliab. Eng. Syst. Saf., 2013
Asia Pac. J. Oper. Res., 2013
2012
IEEE Trans. Syst. Man Cybern. Part A, 2012
Comput. Stat. Data Anal., 2012
Asia Pac. J. Oper. Res., 2012
Reliability of Smart Grid Systems with Warm Standby Spares and Imperfect Coverage.
Proceedings of the SMARTGREENS 2012 - Proceedings of the 1st International Conference on Smart Grids and Green IT Systems, Porto, Portugal, 19, 2012
2011
Grid Service Reliability Modeling and Optimal Task Scheduling Considering Fault Recovery.
IEEE Trans. Reliab., 2011
IEEE Trans. Engineering Management, 2011
J. Softw. Maintenance Res. Pract., 2011
Reliab. Eng. Syst. Saf., 2011
J. Oper. Res. Soc., 2011
Inf. Softw. Technol., 2011
A systematic methodology to deal with the dynamics of customer needs in Quality Function Deployment.
Expert Syst. Appl., 2011
Expert Syst. Appl., 2011
Quantitative risk analysis model of integrating fuzzy fault tree with Bayesian Network.
Proceedings of the 2011 IEEE International Conference on Intelligence and Security Informatics, 2011
Proceedings of the 2011 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), 2011
Proceedings of the 2011 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), 2011
Software reliability modelling and optimization for multi-release software development processes.
Proceedings of the 2011 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), 2011
2010
Nonparametric Estimation of Decreasing Mean Residual Life With Type II Censored Data.
IEEE Trans. Reliab., 2010
Some improvements on adaptive genetic algorithms for reliability-related applications.
Reliab. Eng. Syst. Saf., 2010
Reliab. Eng. Syst. Saf., 2010
Reliab. Eng. Syst. Saf., 2010
Adaptive ridge regression system for software cost estimating on multi-collinear datasets.
J. Syst. Softw., 2010
Comput. Ind. Eng., 2010
A systematic comparison of metamodeling techniques for simulation optimization in Decision Support Systems.
Appl. Soft Comput., 2010
Testing Effort Dependent Software FDP and FCP Models with Consideration of Imperfect Debugging.
Proceedings of the Fourth International Conference on Secure Software Integration and Reliability Improvement, 2010
2009
IEEE Trans. Reliab., 2009
A study of time-between-events control chart for the monitoring of regularly maintained systems.
Qual. Reliab. Eng. Int., 2009
A study of project selection and feature weighting for analogy based software cost estimation.
J. Syst. Softw., 2009
A study of mutual information based feature selection for case based reasoning in software cost estimation.
Expert Syst. Appl., 2009
Empir. Softw. Eng., 2009
On modeling dynamic priorities in the analytic hierarchy process using compositional data analysis.
Eur. J. Oper. Res., 2009
Service Reliability and Availability Analysis of Distributed Software Systems Considering Malware Attack.
Proceedings of the Advances in Software Engineering, 2009
2008
IEEE Trans. Syst. Man Cybern. Part A, 2008
Reliability analysis and optimization of weighted voting systems with continuous states input.
Eur. J. Oper. Res., 2008
Dealing with subjectivity in early product design phase: A systematic approach to exploit Quality Function Deployment potentials.
Comput. Ind. Eng., 2008
Comput. Ind. Eng., 2008
Bayesian Inference Approach for Probabilistic Analogy Based Software Maintenance Effort Estimation.
Proceedings of the 14th IEEE Pacific Rim International Symposium on Dependable Computing, 2008
2007
Proceedings of the Intelligence in Reliability Engineering: New Metaheuristics, 2007
IEEE Trans. Syst. Man Cybern. Part A, 2007
Uncertainty Analysis in Software Reliability Modeling by Bayesian Analysis with Maximum-Entropy Principle.
IEEE Trans. Software Eng., 2007
Classifying Weak, and Strong Components Using ROC Analysis With Application to Burn-In.
IEEE Trans. Reliab., 2007
Modeling and Analysis of Software Fault Detection and Correction Process by Considering Time Dependency.
IEEE Trans. Reliab., 2007
A study of two estimation approaches for parameters of Weibull distribution based on WPP.
Reliab. Eng. Syst. Saf., 2007
Reliab. Eng. Syst. Saf., 2007
Robust recurrent neural network modeling for software fault detection and correction prediction.
Reliab. Eng. Syst. Saf., 2007
A study of the modeling and analysis of software fault-detection and fault-correction processes.
Qual. Reliab. Eng. Int., 2007
Qual. Reliab. Eng. Int., 2007
Optimizing product design using quantitative quality function deployment: a case study.
Qual. Reliab. Eng. Int., 2007
Eur. J. Oper. Res., 2007
Commun. Stat. Simul. Comput., 2007
2006
Bias correction for the least squares estimator of Weibull shape parameter with complete and censored data.
Reliab. Eng. Syst. Saf., 2006
Reliab. Eng. Syst. Saf., 2006
Robust Regression using Probability Plots for Estimating the Weibull Shape Parameter.
Qual. Reliab. Eng. Int., 2006
State probability of a series-parallel repairable system with two-types of failure states.
Int. J. Syst. Sci., 2006
Proceedings of the 12th IEEE Pacific Rim International Symposium on Dependable Computing (PRDC 2006), 2006
Proceedings of the 12th IEEE Pacific Rim International Symposium on Dependable Computing (PRDC 2006), 2006
Proceedings of the 30th Annual International Computer Software and Applications Conference, 2006
2005
IEEE Trans. Reliab., 2005
IEEE Trans. Reliab., 2005
J. Syst. Softw., 2005
J. Parallel Distributed Comput., 2005
Int. J. Syst. Sci., 2005
Proceedings of the 11th IEEE Pacific Rim International Symposium on Dependable Computing (PRDC 2005), 2005
Proceedings of the 11th IEEE Pacific Rim International Symposium on Dependable Computing (PRDC 2005), 2005
2004
IEEE Trans. Reliab., 2004
On changing points of mean residual life and failure rate function for some generalized Weibull distributions.
Reliab. Eng. Syst. Saf., 2004
Int. J. Syst. Sci., 2004
Eur. J. Oper. Res., 2004
On program and file assignment for distributed systems.
Comput. Syst. Sci. Eng., 2004
Computing systems reliability - models and analysis.
Kluwer, ISBN: 978-0-306-48496-4, 2004
2003
IEEE Trans. Software Eng., 2003
IEEE Trans. Reliab., 2003
Optimizing survivability of multi-state systems with multi-level protection by multi-processor genetic algorithm.
Reliab. Eng. Syst. Saf., 2003
Reliab. Eng. Syst. Saf., 2003
Optimal testing-resource allocation with genetic algorithm for modular software systems.
J. Syst. Softw., 2003
A two-stage decision procedure for monitoring processes with low fraction nonconforming.
Eur. J. Oper. Res., 2003
Comput. Stat. Data Anal., 2003
Appl. Soft Comput., 2003
2002
Reliab. Eng. Syst. Saf., 2002
Reliab. Eng. Syst. Saf., 2002
Inf. Softw. Technol., 2002
Comput. Ind., 2002
Proceedings of the 9th Pacific Rim International Symposium on Dependable Computing (PRDC 2002), 2002
2001
J. Intell. Manuf., 2001
2000
Reliab. Eng. Syst. Saf., 2000
1999
J. Syst. Softw., 1999
Proceedings of the 1999 Pacific Rim International Symposium on Dependable Computing (PRDC 1999), 1999
1998
A comparison between software design and code metrics for the prediction of software fault content.
Inf. Softw. Technol., 1998
1997
Handbook of Software Reliability Engineering, by Michael R. Lyu (Editor), McGraw-Hill and IEEE Computer Society, 1996 (Book Review).
Softw. Test. Verification Reliab., 1997
A practical method for the estimation of software reliability growth in the early stage of testing.
Proceedings of the Eighth International Symposium on Software Reliability Engineering, 1997
1995
Proceedings of the Sixth International Symposium on Software Reliability Engineering, 1995
1994
Design and analysis of some fault-tolerance configurations based on a multipath principle.
J. Syst. Softw., 1994
1993
Softw. Test. Verification Reliab., 1993
Proceedings of the Fourth International Symposium on Software Reliability Engineering, 1993
1992
Proceedings of the Third International Symposium on Software Reliability Engineering, 1992
Proceedings of the Third International Symposium on Software Reliability Engineering, 1992
1991
Series on Quality, Reliability and Engineering Statistics 1, WorldScientific, ISBN: 978-981-4506-22-9, 1991
Proceedings of the Second International Symposium on Software Reliability Engineering, 1991