Ming Cheng

According to our database1, Ming Cheng authored at least 62 papers between 2008 and 2020.

Collaborative distances:
  • Dijkstra number2 of four.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Other 

Links

Homepage:

On csauthors.net:

Bibliography

2020
Effects of Magnet Shape on Torque Capability of Surface-Mounted Permanent Magnet Machine for Servo Applications.
IEEE Trans. Industrial Electronics, 2020

Analysis of Stator Slots and Rotor Pole Pairs Combinations of Rotor-Permanent Magnet Flux-Switching Machines.
IEEE Trans. Industrial Electronics, 2020

Analysis of PM Eddy Current Loss in Rotor-PM and Stator-PM Flux-switching Machines by Air-gap Field Modulation Theory.
IEEE Trans. Industrial Electronics, 2020

Decoupled Power Control With Indepth Analysis of Single-Phase Electric Springs.
IEEE Access, 2020

2019
Unified Analysis of Induction Machine and Synchronous Machine Based on the General Airgap Field Modulation Theory.
IEEE Trans. Industrial Electronics, 2019

Comprehensive Comparison of Rotor Permanent Magnet and Stator Permanent Magnet Flux-Switching Machines.
IEEE Trans. Industrial Electronics, 2019

Reliability Analysis and Evaluation for Flux-Switching Permanent Magnet Machine.
IEEE Trans. Industrial Electronics, 2019

Analysis of Airgap Field Modulation Principle of Simple Salient Poles.
IEEE Trans. Industrial Electronics, 2019

Design and Analysis of Current Control Methods for Brushless Doubly Fed Induction Machines.
IEEE Trans. Industrial Electronics, 2019

Comparison Between Linear Induction Motor and Linear Flux-Switching Permanent-Magnet Motor for Railway Transportation.
IEEE Trans. Industrial Electronics, 2019

Emerging Multiport Electrical Machines and Systems - Part II.
IEEE Trans. Industrial Electronics, 2019

2018
Design and Comparison of Three-Phase and Five-Phase FTFSCW-IPM Motor Open-End Winding Drive Systems for Electric Vehicles Applications.
IEEE Trans. Vehicular Technology, 2018

Fault-Tolerant Direct Torque Control of Five-Phase FTFSCW-IPM Motor Based on Analogous Three-Phase SVPWM for Electric Vehicle Applications.
IEEE Trans. Vehicular Technology, 2018

Analytical Approach for Cogging Torque Reduction in Flux-Switching Permanent Magnet Machines Based on Magnetomotive Force-Permeance Model.
IEEE Trans. Industrial Electronics, 2018

A New Soft-Switching Configuration and Its Application in Transformerless Photovoltaic Grid-Connected Inverters.
IEEE Trans. Industrial Electronics, 2018

Comprehensive Investigation on Remedial Operation of Switch Faults for Dual Three-Phase PMSM Drives Fed by T-3L Inverters.
IEEE Trans. Industrial Electronics, 2018

A Simple Active and Reactive Power Control for Applications of Single-Phase Electric Springs.
IEEE Trans. Industrial Electronics, 2018

Analysis of the Operation Principle for Rotor-Permanent-Magnet Flux-Switching Machines.
IEEE Trans. Industrial Electronics, 2018

Steady-State Characteristics of the Dual-Stator Brushless Doubly Fed Induction Generator.
IEEE Trans. Industrial Electronics, 2018

Unbalanced and Low-Order Harmonic Voltage Mitigation of Stand-Alone Dual-Stator Brushless Doubly Fed Induction Wind Generator.
IEEE Trans. Industrial Electronics, 2018

Emerging Multiport Electrical Machines and Systems: Past Developments, Current Challenges, and Future Prospects.
IEEE Trans. Industrial Electronics, 2018

Emerging Multiport Electrical Machines and Systems - Part I.
IEEE Trans. Industrial Electronics, 2018

A switched dynamical system approach towards the optimal control of chemical processes based on a gradient-based parallel optimization algorithm.
Computers & Chemical Engineering, 2018

2017
Remedial Strategies of T-NPC Three-Level Asymmetric Six-Phase PMSM Drives Based on SVM-DTC.
IEEE Trans. Industrial Electronics, 2017

Fault-Tolerant Control of NPC Three-Level Inverters-Fed Double-Stator-Winding PMSM Drives Based on Vector Space Decomposition.
IEEE Trans. Industrial Electronics, 2017

An Outer-Rotor Flux-Switching Permanent-Magnet-Machine With Wedge-Shaped Magnets for In-Wheel Light Traction.
IEEE Trans. Industrial Electronics, 2017

Torque/Power Density Optimization of a Dual-Stator Brushless Doubly-Fed Induction Generator for Wind Power Application.
IEEE Trans. Industrial Electronics, 2017

General Airgap Field Modulation Theory for Electrical Machines.
IEEE Trans. Industrial Electronics, 2017

A hybrid direct torque control scheme for asymmetric six-phase PMSM drives.
Proceedings of the IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, China, October 29, 2017

Multi-terminal VSC-HVDC for smart DC network: Control and simulation.
Proceedings of the IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, China, October 29, 2017

Capacitor monitoring for modular multilevel converters.
Proceedings of the IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, China, October 29, 2017

2016
Design and Comparison of Two Six-Phase Hybrid-Excited Flux-Switching Machines for EV/HEV Applications.
IEEE Trans. Industrial Electronics, 2016

DC-Link Current Ripple Mitigation for Current-Source Grid-Connected Converters Under Unbalanced Grid Conditions.
IEEE Trans. Industrial Electronics, 2016

Mathematical Modeling of a 12-Phase Flux-Switching Permanent-Magnet Machine for Wind Power Generation.
IEEE Trans. Industrial Electronics, 2016

Comparative Study of Switched Reluctance Machines With Half-and Full-Teeth-Wound Windings.
IEEE Trans. Industrial Electronics, 2016

Dynamic Performance Evaluation of a Nine-Phase Flux-Switching Permanent-Magnet Motor Drive With Model Predictive Control.
IEEE Trans. Industrial Electronics, 2016

Application of multi-class fuzzy support vector machine classifier for fault diagnosis of wind turbine.
Fuzzy Sets Syst., 2016

An interleaved current-fed bidirectional full-bridge DC/DC converter for on-board charger.
Proceedings of the IECON 2016, 2016

Direct power control strategies of cascaded brushless doubly fed induction generators.
Proceedings of the IECON 2016, 2016

Control of three-phase electric springs used in microgrids under ideal and non-ideal conditions.
Proceedings of the IECON 2016, 2016

Vector space decomposition based control of neutral-point-clamping (NPC) three-level inverters fed dual three-phase PMSM drives.
Proceedings of the IECON 2016, 2016

A new fault-tolerant control strategy for switch open-circuit fault in open-winding driving system.
Proceedings of the IECON 2016, 2016

2015
Frequency-Adaptive Fractional-Order Repetitive Control of Shunt Active Power Filters.
IEEE Trans. Industrial Electronics, 2015

Fault-Tolerant Control of Paralleled-Voltage-Source-Inverter-Fed PMSM Drives.
IEEE Trans. Industrial Electronics, 2015

Analysis of a Novel Magnetic-Geared Dual-Rotor Motor With Complementary Structure.
IEEE Trans. Industrial Electronics, 2015

Flux-Regulation Theories and Principles of Hybrid-Excited Flux-Switching Machines.
IEEE Trans. Industrial Electronics, 2015

Sensorless SVPWM-FADTC of a New Flux-Modulated Permanent-Magnet Wheel Motor Based on a Wide-Speed Sliding Mode Observer.
IEEE Trans. Industrial Electronics, 2015

Speed Control of Complementary and Modular Linear Flux-Switching Permanent-Magnet Motor.
IEEE Trans. Industrial Electronics, 2015

Resonance damping in a smart transformer-based microgrid.
Proceedings of the IECON 2015, 2015

2014
Influence of Leading Design Parameters on the Force Performance of a Complementary and Modular Linear Flux-Switching Permanent-Magnet Motor.
IEEE Trans. Industrial Electronics, 2014

2013
Remedial Injected-Harmonic-Current Operation of Redundant Flux-Switching Permanent-Magnet Motor Drives.
IEEE Trans. Industrial Electronics, 2013

Investigation and General Design Principle of a New Series of Complementary and Modular Linear FSPM Motors.
IEEE Trans. Industrial Electronics, 2013

2012
Improvement of operating performance for the wind farm with a novel CSC type wind turbine-SMES hybrid system.
Proceedings of the 21st IEEE International Symposium on Industrial Electronics, 2012

Control of a six-switch inverter based single-phase grid-connected PV generation system with inverse Park transform PLL.
Proceedings of the 21st IEEE International Symposium on Industrial Electronics, 2012

A comparative study of control schemes for VSCHVDC transmission system.
Proceedings of the 38th Annual Conference on IEEE Industrial Electronics Society, 2012

Individual pitch control for mitigation of power fluctuation of variable speed wind turbines.
Proceedings of the IEEE Asian Solid State Circuits Conference, 2012

2011
Back-EMF Harmonic Analysis and Fault-Tolerant Control of Flux-Switching Permanent-Magnet Machine With Redundancy.
IEEE Trans. Industrial Electronics, 2011

Overview of Stator-Permanent Magnet Brushless Machines.
IEEE Trans. Industrial Electronics, 2011

2010
Remedial Brushless AC Operation of Fault-Tolerant Doubly Salient Permanent-Magnet Motor Drives.
IEEE Trans. Industrial Electronics, 2010

2008
Analysis of Fault-Tolerant Performance of a Doubly Salient Permanent-Magnet Motor Drive Using Transient Cosimulation Method.
IEEE Trans. Industrial Electronics, 2008

Investigation and Implementation of Control Strategies for Flux-Switching Permanent Magnet Motor Drives.
Proceedings of the Industry Applications Society Annual Meeting, 2008

Comparative Study of Flux-Switching and Doubly-Salient PM Machines Particularly on Torque Capability.
Proceedings of the Industry Applications Society Annual Meeting, 2008


  Loading...