Punchless Drawing of Magnesium Alloy Sheet Under Cold Condition and its Computation. - Minoru Yamashita; Koji Kuwabara (Int. J. Autom. Technol., 2016)

11.1 A 512Gb 3b/cell flash memory on 64-word-line-layer BiCS technology. - Ryuji Yamashita; Sagar Magia; Tsutomu Higuchi; Kazuhide Yoneya; Toshio Yamamura; Hiroyuki Mizukoshi; Shingo Zaitsu; Minoru Yamashita; Shunichi Toyama; Norihiro Kamae; Juan Lee; Shuo Chen; et al. (ISSCC, 2017)

Estimation of Die Release Force of mboxJIS-ADC12 Aluminum Alloy Die Castings Manufactured Through High-Pressure Die Casting via Computer Simulation. - Makoto Nikawa; Kengo Usui; Hiroaki Iwahori; Atsushi Sato; Minoru Yamashita (Int. J. Autom. Technol., 2018)

A 512Gb 3-bit/Cell 3D Flash Memory on 128-Wordline-Layer with 132MB/s Write Performance Featuring Circuit-Under-Array Technology. - Chang Hua Siau; Kwang-Ho Kim; Seungpil Lee; Katsuaki Isobe; Noboru Shibata; Kapil Verma; Takuya Ariki; Jason Li 001; Jong Yuh; Anirudh Amarnath; Qui Nguyen; Ohwon Kwon; et al. (ISSCC, 2019)

Solid Fraction Examination at Flow Cessation and Flow Cessation Mechanism of Al-Si-Mg Alloy. - Makoto Nikawa; Yu Iba; Minoru Yamashita (Int. J. Autom. Technol., 2020)

Evaluation of Residual Stress in Die Castings of Al-Si-Cu Alloy Considering Material Composition Change in Thickness Direction. - Makoto Nikawa; Daichi Sasai; Yoshiki Mizutani; Minoru Yamashita (Int. J. Autom. Technol., 2021)

Effect of Strain-Rate on Forming Limit Strain of Aluminum Alloy and Mild Steel Sheets Under Strain Path Change. - Minoru Yamashita; Shohei Komuro; Makoto Nikawa (Int. J. Autom. Technol., 2021)

Effect of Powder Mold Release Agent on Aluminum Alloy Melt Under Gravity Casting Conditions. - Kuiyuan Mu; Makoto Nikawa; Kunio Hayakawa; Hidetaka Shima; Minoru Yamashita (Int. J. Autom. Technol., 2022)

Forming of Multiple Straight Convex Shapes on Aluminum Sheet Using Impulsive Water Pressure. - Minoru Yamashita; Haruki Saito; Makoto Nikawa (Int. J. Autom. Technol., 2022)

Simple Contact Sensor for Material on Die in Sheet Hydroforming. - Minoru Yamashita; Nozomi Minowa; Makoto Nikawa (Int. J. Autom. Technol., 2023)