Noise Reduction Using Piezoelectric Active Control on High Speeds Switched Reluctance Drives. - X. Ojeda; Mohamed Gabsi; Michel Lecrivain; Xavier Mininger (IAS, 2007)

Control of a Hybrid Excitation Synchronous Generator for Aircraft Applications. - Nicolas Patin; Lionel Vido; Eric Monmasson; Jean-Paul Louis; Mohamed Gabsi; Michel Lecrivain (IEEE Trans. Ind. Electron., 2008)

Hybrid Excitation Synchronous Machines: Energy-Efficient Solution for Vehicles Propulsion. - Yacine Amara; Lionel Vido; Mohamed Gabsi; Emmanuel Hoang; Hamid Ben Ahmed; Michel Lecrivain (IEEE Trans. Veh. Technol., 2009)

Comparison of Open Circuit Flux Control Capability of a Series Double Excitation Machine and a Parallel Double Excitation Machine. - Yacine Amara; Sami Hlioui; Rachid Belfkira; Georges Barakat; Mohamed Gabsi (IEEE Trans. Veh. Technol., 2011)

Performance Synthesis of Permanent-Magnet Synchronous Machines During the Driving Cycle of a Hybrid Electric Vehicle. - Phi Hung Nguyen; Emmanuel Hoang; Mohamed Gabsi (IEEE Trans. Veh. Technol., 2011)

Hybrid excitation synchronous motor control in electric vehicle with copper and iron losses minimization. - Rita Mbayed; Georges Salloum; Lionel Vido; Eric Monmasson; Mohamed Gabsi (IECON, 2012)

Five-Phase Flux Switching Machine: Optimal current waveforms in order to improve open phase operation. - E. Ben Sedrine; Javier Ojeda; Ilhem Slama-Belkhodja; Mohamed Gabsi (IECON, 2012)

Hybrid coupling: Magnetic equivalent circuit coupled to finite element analysis for PMSM electromagnetic modeling. - Boumedyen Nedjar; Lionel Vido; Sami Hlioui; Yacine Amara; Mohamed Gabsi (ISIE, 2012)

Thermal-Electromagnetic Analysis for Driving Cycles of Embedded Flux-Switching Permanent-Magnet Motors. - Guangjin Li; Javier Ojeda; Emmanuel Hoang; Mohamed Gabsi; Michel Lecrivain (IEEE Trans. Veh. Technol., 2012)

Hybrid excitation synchronous generator in embedded applications: Modeling and control. - Rita Mbayed; Georges Salloum; Lionel Vido; Eric Monmasson; Mohamed Gabsi (Math. Comput. Simul., 2013)

Bi-criteria optimization design of an interior permanent magnet synchronous machine for a hybrid electric vehicle application. - Phi Hung Nguyen; Emmanuel Hoang; Mohamed Gabsi (Math. Comput. Simul., 2013)

Analytical Approach for Mechanical Resonance Frequencies of High-Speed Machines. - Julien Boisson; François Louf; Javier Ojeda; Xavier Mininger; Mohamed Gabsi (IEEE Trans. Ind. Electron., 2014)

A Hybrid-Excited Flux-Switching Machine for High-Speed DC-Alternator Applications. - Benjamin Gaussens; Emmanuel Hoang; Michel Lecrivain; Philippe Manfe; Mohamed Gabsi (IEEE Trans. Ind. Electron., 2014)

Comparative Study of Classical and Mutually Coupled Switched Reluctance Motors Using Multiphysics Finite-Element Modeling. - Xiaobin Liang; Guangjin Li; Javier Ojeda; Mohamed Gabsi; Zhuoxiang Ren (IEEE Trans. Ind. Electron., 2014)

Modeling and Optimization of a Linear Actuator for a Two-Stage Valve Tappet in an Automotive Engine. - Jean-Laurent Duchaud; Sami Hlioui; François Louf; Javier Ojeda; Mohamed Gabsi (IEEE Trans. Veh. Technol., 2015)

Design Optimization of a Hybrid-Excited Flux-Switching Machine for Aircraft-Safe DC Power Generation Using a Diode Bridge Rectifier. - Andre Nasr; Sami Hlioui; Mohamed Gabsi; Mathieu Mairie; Didier Lalevee (IEEE Trans. Ind. Electron., 2017)

Structural optimization to maximize the flux control range of a double excitation synchronous machine. - Trung-Kien Hoang; Lionel Vido; Frédéric Gillon; Mohamed Gabsi (Math. Comput. Simul., 2019)

Detection and Localization of Interturn Short-Circuit Fault by Analysis of Stator Accelerations Spectrum in Five-Phase Flux Switching Machine for HEV Application. - Noemi Lanciotti; Javier Ojeda; Mohamed Gabsi; Taha Boukhobza (EVER, 2020)

Pre-optimization of hybridization ratio in hybrid excitation synchronous machines using electrical circuits modelling. - Yacine Amara; Sami Hlioui; A. Hamid Ben Ahmed; Mohamed Gabsi (Math. Comput. Simul., 2021)

AC Losses in Windings: Review and Comparison of Models With Application in Electric Machines. - Taha El Hajji; Sami Hlioui; François Louf; Mohamed Gabsi; Anouar Belahcen; Guillaume Mermaz-Rollet; M'hamed Belhadi (IEEE Access, 2024)