Tool Path Generation for High-quality Automatic Finish Machining. - Masatake Higashi; Naotake Mohri; Toshiyuki Shin; Nagao Saito (PROLAMAT, 1992)

Control system design for macro/micro manipulator with application to electrodischarge machining. - Tatsuo Narikiyo; Hiroyuki Nakane; Tomohiko Akuta; Naotake Mohri; Nagao Saito (IROS, 1994)

Electrical Discharge Device with Direct Drive Method for Thin Wire Electrode. - Hiromichi Morita; Katsushi Furutani; Naotake Mohri (ICRA, 1995)

Improvement of Control Method for Piezoelectric Actuator by Combining Induced Charge Feedback with Inverse Transfer Function Compensation. - Katsushi Furutani; Mitsunori Urushibata; Naotake Mohri (ICRA, 1998)

Development of Micro Electrical Discharge Machine. - Hideki Takezawa; Naotake Mohri; Kouhei Asano; Yasunori Kodama (Int. J. Autom. Technol., 2008)

Influence of Gap Phenomenon on Various Kinds of Powder-Suspended EDM. - Hideki Takezawa; Tadashi Asano; Naotake Mohri (Int. J. Autom. Technol., 2013)

Changes in Surface Roughness Caused by Electrical Discharge Coating. - Hideki Takezawa; Naotake Mohri; Toshiya Kusama (Int. J. Autom. Technol., 2019)