Temperature-dependent breakdown and hot carrier stress of PHEMTs. - Paolo Cova; Nicola Delmonte; Giovanna Sozzi; Roberto Menozzi (Microelectron. Reliab., 2004)

On state breakdown in PHEMTs and its temperature dependence. - Paolo Cova; Nicola Delmonte; Roberto Menozzi (Microelectron. Reliab., 2005)

Thermal characterization and modeling of power hybrid converters for distributed power systems. - Paolo Cova; Nicola Delmonte; Roberto Menozzi (Microelectron. Reliab., 2006)

Layout Considerations and Thermal Analysis of a 1.8 MHz Resonant VRM. - Giorgio Spiazzi; Leopoldo Rossetto; Paolo Mattavelli; Paolo Cova; Nicola Delmonte (IAS, 2007)

Test structures for dielectric spectroscopy of thin films at microwave frequencies. - Nicola Delmonte; B. E. Watts; Giovanni Chiorboli; Paolo Cova; Roberto Menozzi (Microelectron. Reliab., 2007)

Thermal modeling of high frequency DC-DC switching modules: Electromagnetic and thermal simulation of magnetic components. - Paolo Cova; Nicola Delmonte; Roberto Menozzi (Microelectron. Reliab., 2008)

Heat management for power converters in sealed enclosures: A numerical study. - Mirko Bernardoni; Paolo Cova; Nicola Delmonte; Roberto Menozzi (Microelectron. Reliab., 2009)

Three-dimensional finite-element thermal simulation of GaN-based HEMTs. - Fulvio Bertoluzza; Nicola Delmonte; Roberto Menozzi (Microelectron. Reliab., 2009)

Thermal modeling of planar transformer for switching power converters. - Mirko Bernardoni; Nicola Delmonte; Paolo Cova; Roberto Menozzi (Microelectron. Reliab., 2010)

Coupled measurement-simulation procedure for very high power fast recovery - Soft behavior diode design and testing. - Fulvio Bertoluzza; Paolo Cova; Nicola Delmonte; Pietro Pampili; Marco Portesine (Microelectron. Reliab., 2010)

Dynamic electro-thermal modeling for power device assemblies. - Paolo Cova; Mirko Bernardoni; Nicola Delmonte; Roberto Menozzi (Microelectron. Reliab., 2011)

Reliability oriented design of power supplies for high energy physics applications. - Stefania Baccaro; Giovanni Busatto; Mauro Citterio; Paolo Cova; Nicola Delmonte; Francesco Iannuzzo; Agostino Lanza; Marco Riva; Annunziata Sanseverino; Giorgio Spiazzi (Microelectron. Reliab., 2012)

Thermal modeling and design of power converters with tight thermal constraints. - Paolo Cova; Nicola Delmonte (Microelectron. Reliab., 2012)

Thermal optimization of water heat sink for power converters with tight thermal constraints. - Paolo Cova; Nicola Delmonte; Francesco Giuliani; Mauro Citterio; Stefano Latorre; Massimo Lazzaroni; Agostino Lanza (Microelectron. Reliab., 2013)

Finite element modeling and characterization of lead-free solder joints fatigue life during power cycling of surface mounting power devices. - Nicola Delmonte; Francesco Giuliani; Paolo Cova (Microelectron. Reliab., 2013)

Temperature-dependent reverse-bias stress of normally-off GaN power FETs. - Francesco Giuliani; Nicola Delmonte; Paolo Cova; Roberto Menozzi (Microelectron. Reliab., 2013)

Metrological characterization of a cold plate test bench. - Massimo Lazzaroni; Mauro Citterio; Stefano Latorre; Agostino Lanza; Paolo Cova; Nicola Delmonte; Francesco Giuliani (I2MTC, 2014)

A main converter for future LHC experiments: Features measurement and reliability considerations. - Massimo Lazzaroni; Mauro Citterio; Stefano Latorre; Agostino Lanza; Paolo Cova; Nicola Delmonte; Francesco Giuliani (I2MTC, 2014)

Thermal damage in SiC Schottky diodes induced by SE heavy ions. - Carmine Abbate; Giovanni Busatto; Paolo Cova; Nicola Delmonte; Francesco Giuliani; Francesco Iannuzzo; Annunziata Sanseverino; Francesco Velardi (Microelectron. Reliab., 2014)

Robust snubberless soft-switching power converter using SiC power MOSFETs and bespoke thermal design. - Francesco Giuliani; De Dipankar; Nicola Delmonte; Alberto Castellazzi; Paolo Cova (Microelectron. Reliab., 2014)

Numerical analysis and experimental tests for solder joints power cycling optimization. - Paolo Cova; Nicola Delmonte; Diego Chiozzi (Microelectron. Reliab., 2015)

A simple 1-D finite elements approach to model the effect of PCB in electronic assemblies. - Diego Chiozzi; Mirko Bernardoni; Nicola Delmonte; Paolo Cova (Microelectron. Reliab., 2016)

Thermal design optimization of novel modular power converter assembly enabling higher performance, reliability and availability. - Paolo Cova; Nicola Delmonte; Adane Kassa Solomon; Alberto Castellazzi (Microelectron. Reliab., 2016)

Metrological Characterization of Cold Plates for Power Converters. - Massimo Lazzaroni; Mauro Citterio; Stefano Latorre; Agostino Lanza; Paolo Cova; Nicola Delmonte; Francesco Giuliani (IEEE Trans. Instrum. Meas., 2016)

GaN-based triple active bridge for avionic application. - Francesco Giuliani; Giampaolo Buticchi; Marco Liserre; Nicola Delmonte; Paolo Cova; Nicola Pignoloni (ISIE, 2017)

Thermal design and characterization of a modular integrated liquid cooled 1200 V-35 A SiC MOSFET bi-directional switch. - Paolo Cova; Attahir Murtala Aliyu; Alberto Castellazzi; Diego Chiozzi; Nicola Delmonte; Philippe Lasserre; N. Pignoloni (Microelectron. Reliab., 2017)

Modeling, Fabrication and Testing of a Customizable Micromachined Hotplate for Sensor Applications. - Alessio Tommasi; Matteo Cocuzza; Denis Perrone; Candido Fabrizio Pirri; Roberto Mosca 003; Marco Villani 003; Nicola Delmonte; Andrea Zappettini; Davide Calestani; Simone L. Marasso (Sensors, 2017)

GaN transistors efficient cooling by graphene foam. - Mattia Antonini; Paolo Cova; Nicola Delmonte; Alberto Castellazzi (Microelectron. Reliab., 2018)

Non-linear thermal simulation at system level: Compact modelling and experimental validation. - Mirko Bernardoni; Nicola Delmonte; Diego Chiozzi; Paolo Cova (Microelectron. Reliab., 2018)

Water cold plates for high power converters: A software tool for easy optimized design. - Paolo Cova; Nicola Delmonte; Diego Chiozzi; Marco Portesine; F. Vaccaro; E. Mantegazza (Microelectron. Reliab., 2018)

Photovoltaic plant maintainability optimization and degradation detection: Modelling and characterization. - Paolo Cova; Nicola Delmonte; Massimo Lazzaroni (Microelectron. Reliab., 2018)

A Methodology to Determine the Effect of a Novel Modulation in the Reliability of an Automotive DC-Link Capacitor. - David Cabezuelo; Iñigo Kortabarria; Jon Andreu; Fernando Rodríguez; Adrián Arcas; Nicola Delmonte (IEEE Access, 2020)

Modeling of a university campus Micro-Grid for optimal planning of renewable generation and storage deployment. - Marco Simonazzi; Nicola Delmonte; Paolo Cova; Gianluigi Ferrari 001; Francesco Zanichelli; Roberto Menozzi (ISC2, 2021)

Development of a cryogenic DC-DC Boost Converter: devices characterization and first prototype measurements. - Niccolò Gallice; Danilo Santoro; Paolo Cova; Nicola Delmonte; Massimo Lazzaroni; Paola Sala; Andrea Zani (I2MTC, 2022)

Bionic for Training: Smart Framework Design for Multisensor Mechatronic Platform Validation. - Ruben Foresti; Rosario Statello; Nicola Delmonte; Francesco Paolo Lo Muzio; Giacomo Rozzi; Michele Miragoli; Leopoldo Sarli; Gianluigi Ferrari 001; Claudio Macaluso; Marcello Giuseppe Maggio; Francesco Pisani; Cosimo Costantino (Sensors, 2022)

Electrical Vehicle Fleet Management for Industrial Environment with Battery SoH Prediction Through Neural Networks. - Paolo Cova; Nicola Delmonte; Stefano Ferrari; Massimo Lazzaroni; Roberto Menozzi; Danilo Santoro; Marco Simonazzi (MetroXRAINE, 2023)

Image Processing System Based on Mesh Technology for Cell Kinematic Measurement. - Minh Long Hoang; Nicola Delmonte; Flavia Bonalumi; Mirko Hu; Michele Miragoli; Paul Depoorter; Alessia Caputo; Barbara Montanini; Margherita Burattini (I2MTC, 2024)

Operational Amplifier Characterization at Cryogenic Temperatures. - Danilo Santoro; Giovanni Chiorboli; Marco Bassani; Alessandro Andreani; Paolo Cova; Nicola Delmonte; Massimo Lazzaroni; Andrea Riminucci; Valeria Trabattoni; Andrea Zani (I2MTC, 2024)

Reliability Evaluation in Operational Amplifier at Cryogenic Temperature. - Marco Bassani; Danilo Santoro; Giovanni Chiorboli; Minh Long Hoang; Alessandro Andreani; Paolo Cova; Massimo Lazzaroni; Valeria Trabattoni; Andrea Zani; Nicola Delmonte (I2MTC, 2025)

DC-DC Boost Converter Design With Analog Feedback Control for Cryogenic Applications. - Danilo Santoro; Niccolò Gallice; Marco Bassani; Paolo Cova; Nicola Delmonte; Massimo Lazzaroni; Valeria Trabattoni; Andrea Zani (IEEE Access, 2025)

Investigation of Static and Dynamic Behavior of Off-the-Shelf Operational Amplifiers at Cryogenic Temperatures. - Danilo Santoro; Giovanni Chiorboli; Marco Bassani; Téo Baudry; Alessandro Andreani; Paolo Cova; Nicola Delmonte; Massimo Lazzaroni; Valeria Trabattoni; Andrea Zani (IEEE Trans. Instrum. Meas., 2025)