State feedback control of discrete event systems using marked graphs. - Asma Ghaffari; Nidhal Rezg; Xiaolan Xie (CDC, 2001)

An integrated greedy heuristic for a flexible job shop scheduling problem. - Yazid Mati; Nidhal Rezg; Xiaolan Xie (SMC, 2001)

A taboo search approach for deadlock-free scheduling of automated manufacturing systems. - Yazid Mati; Nidhal Rezg; Xiaolan Xie (J. Intell. Manuf., 2001)

Geometric approach and taboo search for scheduling flexible manufacturing systems. - Yazid Mati; Nidhal Rezg; Xiaolan Xie (IEEE Trans. Robotics Autom., 2001)

Maximally Permissive and Non-Blocking Control of Petri Nets using Theory of Regions. - Asma Ghaffari; Nidhal Rezg; Xiaolan Xie (ICRA, 2002)

Feedback control logic for forbidden-state problems of marked graphs: application to a real manufacturing system. - Asma Ghaffari; Nidhal Rezg; Xiaolan Xie (IEEE Trans. Autom. Control., 2003)

Design of a live and maximally permissive Petri net controller using the theory of regions. - Asma Ghaffari; Nidhal Rezg; Xiaolan Xie (IEEE Trans. Robotics Autom., 2003)

Supervisory control of partially observable marked graphs. - Zied Achour; Nidhal Rezg; Xiaolan Xie (IEEE Trans. Autom. Control., 2004)

Modeling and optimizing a joint inventory control and preventive maintenance strategy for a randomly failing production unit: analytical and simulation approaches. - Nidhal Rezg; Anis Chelbi; Xiaolan Xie (Int. J. Comput. Integr. Manuf., 2005)

Time floating general mutual exclusion constraints in partial observable discrete event systems. - Zied Achour; Nidhal Rezg (IRI, 2006)

Decision Making Based on Fuzzy Logic for Product Subcontracting Taking into Account Maintenance Actions. - Ricardo Arturo Fernandez Gomez; Sophie Hennequin; Nidhal Rezg (CASE, 2007)

Impact of the delay of subcontracting in a context of integrated maintenance: analytical approach. - Mohammed Dahane; Christian Clementz; Nidhal Rezg (ETFA, 2007)

An optimal production/maintenance planning under stochastic random demand, service level and failure rate. - Zied Hajej; Sofiène Dellagi; Nidhal Rezg (CASE, 2009)

Temporal Problem of Subcontracting of Manufacturing Unit under Joint Production Control and Maintenance Policy. - Mohammed Dahane; Christian Clementz; Nidhal Rezg (ETFA, 2009)

Contribution of simulation to the optimization of maintenance strategies for a randomly failing production system. - V. Boschian; Nidhal Rezg; Anis Chelbi (Eur. J. Oper. Res., 2009)

Integration of subcontracting activity in a production planning for randomly failing manufacturing system: Feasibility and profitability conditions. - Mohammed Dahane; Nidhal Rezg (CASE, 2010)

Effects of extension of subcontracting on a production system in a joint maintenance and production context. - Mohammed Dahane; Christian Clementz; Nidhal Rezg (Comput. Ind. Eng., 2010)

Integrated maintenance and control policy based on quality control. - Mehdi Radhoui; Nidhal Rezg; Anis Chelbi (Comput. Ind. Eng., 2010)

Joint quality control and preventive maintenance strategy for imperfect production processes. - Mehdi Radhoui; Nidhal Rezg; Anis Chelbi (J. Intell. Manuf., 2010)

Guest Editorial. - Nidhal Rezg; Kondo H. Adjallah (J. Intell. Manuf., 2010)

Economic model of outsourcing for a subcontractor manufacturing system in a single subcontractor - multi-outsourcers relationship. - Mohammed Dahane; Nidhal Rezg (CASE, 2011)

Optimum block replacement policy over a random time horizon. - Abdelhakim Khatab; Nidhal Rezg; Daoud Ait-Kadi (J. Intell. Manuf., 2011)

Periodic and sequential preventive maintenance policies over a finite planning horizon with a dynamic failure law. - Jérémie Schutz; Nidhal Rezg; Jean-Baptiste Léger (J. Intell. Manuf., 2011)

Impact of delivery time on optimal production/delivery/maintenance planning. - Sadok Turki; Hajej Zied; Nidhal Rezg (CASE, 2012)

Infinitesimal perturbation analysis based optimization for a manufacturing system with delivery time. - Sadok Turki; Olivier Bistorin; Nidhal Rezg (ETFA, 2012)

Quasi-optimal integrated production, inventory and maintenance policies for a single-vendor single-buyer system with imperfect production process. - Yesser Yedes; Anis Chelbi; Nidhal Rezg (J. Intell. Manuf., 2012)

Order/remanufacturing policy of spare part with recovery option for stochastic deteriorating system. - Hamza Boudhar; Mohammed Dahane; Nidhal Rezg (ETFA, 2013)

Production planning in integrated maintenance context for multi-period multi-product failure-prone single-machine. - Mohammed Haoues; Nadia Kinza Mouss; Mohammed Dahane; Nidhal Rezg (ETFA, 2013)

Infinitesimal perturbation analysis based optimization for a manufacturing-remanufacturing system. - Sadok Turki; Olivier Bistorin; Nidhal Rezg (ETFA, 2013)

Jointly Optimal Preventive Maintenance under Spare Parts Order Strategy. - Kader Ba; Walid Erray; Sofiène Dellagi; Nidhal Rezg (MIM, 2013)

Spare Part Returns in Stochastic Deteriorating Manufacturing System under a Condition-Based Maintenance Policy: Simulation-Based Genetic Algorithm Approach. - Hamza Boudhar; Mohammed Dahane; Nidhal Rezg (MIM, 2013)

An Optimal Production Planning and Maintenance Policy for a Multiple-Product and Single Machine under Failure Rate Dependency. - Lahcen Mifdal; Zied Hajej; Sofiène Dellagi; Nidhal Rezg (MIM, 2013)

Optimal Production Planning for a Manufacturing System: An Approach Based on PA. - Sadok Turki; Zied Hajej; Nidhal Rezg (MIM, 2013)

A New Inspection Heuristic for a Condition-Based Maintenance Policy in a Spare Part Returns Context. - Hamza Boudhar; Mohammed Dahane; Nidhal Rezg (SMC, 2013)

Optimization of Single-Manufacturer Multiple-Contractors Outsourcing Relationship in Integrated Approach of Production, Maintenance and Quality. - Mohammed Haoues; Nadia Kinza Mouss; Mohammed Dahane; Nidhal Rezg (SMC, 2013)

Maintenance strategy for leased equipment. - Jérémie Schutz; Nidhal Rezg (Comput. Ind. Eng., 2013)

An integrated strategy for efficient business plan and maintenance plan for systems with a dynamic failure distribution. - Jérémie Schutz; Nidhal Rezg; Jean-Baptiste Léger (J. Intell. Manuf., 2013)

Optimal selective renewal policy for systems subject to propagated failures with global effect and failure isolation phenomena. - Ghofrane Maaroufi; Anis Chelbi; Nidhal Rezg (Reliab. Eng. Syst. Saf., 2013)

Control synthesis for admissible paths based on theory of regions: Application to a flexible manufacturing system. - Nidhal Rezg; Sadok Rezig; Mohamed Ali Kammoun; Zied Achour (CCA, 2014)

Green management of Spare parts for an integrated optimal maintenance and production policy. - Kader Ba; Sofiène Dellagi; Nidhal Rezg (CASE, 2014)

Control synthesis based on reachability graph with minimal cuts: Application to a flexible manufacturing system. - Sadok Rezig; Zied Achour; Nidhal Rezg (ETFA, 2014)

Infinitesimal perturbation analysis for optimal production control in a reverse logistic system with different demands. - Sadok Turki; Olivier Bistorin; Nidhal Rezg (ETFA, 2014)

Maintenance optimisation for delivery means in the supply chain. - Hajej Zied; Sofiène Dellagi; Nidhal Rezg (ICALT, 2014)

Optimization of stochastic fluid model using perturbation analysis: A manufacturing-remanufacturing system with stochastic demand and stochastic returned products. - Sadok Turki; Olivier Bistorin; Nidhal Rezg (ICNSC, 2014)

Integrated transportation and maintenance problem. - Hajej Zied; Nidhal Rezg; Gilles Cormier (ICNSC, 2014)

Optimal control synthesis for a flexible manufacturing system based on minimal cuts. - Sadok Rezig; Zied Achour; Nidhal Rezg; Mohamed Ali Kammoun (IEEM, 2014)

Perturbation analysis for discrete flow model: optimization of a manufacturing-remanufacturing system. - Sadok Turki; Nidhal Rezg (SMC, 2014)

A condition-based maintenance policy for a production system under excessive environmental degradation. - Houssam Chouikhi; Abdelhakim Khatab; Nidhal Rezg (J. Intell. Manuf., 2014)

Joint optimisation of maintenance and production policies with subcontracting and product returns. - Zied Hajej; Sofiène Dellagi; Nidhal Rezg (J. Intell. Manuf., 2014)

An optimal integrated maintenance strategy with switching policy under subcontracting constraint. - Hajej Zied; Sofiène Dellagi; Nidhal Rezg (ICM, 2015)

An optimal integrated maintenance for multi parallel workstations under returned products. - Tarek Askri; Zied Hajej; Nidhal Rezg (IEEM, 2015)

Modeling of a Management and Maintenance Plan for Hospital Beds. - Wajih Ezzeddine; Jérémie Schutz; Nidhal Rezg (MCO (2), 2015)

Solving the Production and Maintenance Optimization Problem by a Global Approach. - Vinh Thanh Ho; Zied Hajej; Hoai An Le Thi; Nidhal Rezg (MCO (2), 2015)

Impact of the Corrective Maintenance Cost on Manufacturing Remanufacturing System Performance. - Sadok Turki; Zied Hajej; Nidhal Rezg (MCO (2), 2015)

Supervisory control based on minimal cuts and Petri net sub-controllers coordination. - Sadok Rezig; Zied Achour; Nidhal Rezg; Mohamed Ali Kammoun (Int. J. Syst. Sci., 2016)

Joint optimization of preventive maintenance and spare parts inventory for an optimal production plan with consideration of CO2 emission. - Kader Ba; Sofiène Dellagi; Nidhal Rezg; Walid Erray (Reliab. Eng. Syst. Saf., 2016)

Study of the E-Maintenance Service in E-Logistic Supply Chain. - Sadok Turki; Nidhal Rezg (SOSE, 2017)

FPA method for optimal production planning under availability/degradation machine and subcontracting constraint. - Souheil Ayed; Zied Hajej; Sadok Turki; Nidhal Rezg (Int. J. Prod. Res., 2017)

Improved preventive maintenance in the framework of forecasting problem under subcontractor constraint. - Zied Hajej; Nidhal Rezg; Ali Gharbi (Int. J. Prod. Res., 2017)

New dynamic heuristic for the optimization of opportunities to use new and remanufactured spare part in stochastic degradation context. - Hamza Boudhar; Mohammed Dahane; Nidhal Rezg (J. Intell. Manuf., 2017)

An Optimal Integrated Maintenance to production with Carbon Emission for a Closed-loop System. - Salim Bouslikhane; Zied Hajej; Nidhal Rezg (CoDIT, 2018)

Maintenance policy optimisation for multi-component systems considering degradation of components and imperfect maintenance actions. - Ronald M. Martinod; Olivier Bistorin; Leonel F. Castañeda; Nidhal Rezg (Comput. Ind. Eng., 2018)

Quality issue in forecasting problem of production and maintenance policy for production unit. - Zied Hajej; Nidhal Rezg; Ali Gharbi (Int. J. Prod. Res., 2018)

PLC-based implementation of supervisory control for flexible manufacturing systems using theory of regions. - Sadok Rezig; Chekib Ghorbel; Zied Achour; Nidhal Rezg (Int. J. Autom. Control., 2019)

Optimal maintenance plan for two-level assembly system and risk study of machine failure. - Zouhour Guiras; Sadok Turki; Nidhal Rezg; Alexandre Dolgui (Int. J. Prod. Res., 2019)

Integrated maintenance/spare parts management for manufacturing system according to variable production rate impacting the system degradation. - Sofiène Dellagi; Wajdi Trabelsi; Zied Hajej; Nidhal Rezg (Concurr. Eng. Res. Appl., 2020)

An optimal integrated lot sizing and maintenance strategy for multi-machines system with energy consumption. - Zied Hajej; Nidhal Rezg (Int. J. Prod. Res., 2020)

An optimal integrated production and maintenance strategy for a multi-wind turbines system. - Zied Hajej; Nidhal Rezg; Anis Chelbi; Maryem Bouzoubaa (Int. J. Prod. Res., 2020)

Maintenance on leasing sales strategies for manufacturing/remanufacturing system with increasing failure rate and carbon emission. - Zied Hajej; Nidhal Rezg; Ali Gharbi (Int. J. Prod. Res., 2020)

Environmental issue in an integrated production and maintenance control of unreliable manufacturing/remanufacturing systems. - Nadia Ndhaief; Nidhal Rezg; Adnène Hajji; Olivier Bistorin (Int. J. Prod. Res., 2020)

Joint optimization of capacity, production and maintenance planning of leased machines. - Zied Hajej; Nidhal Rezg; Tarek Askri (J. Intell. Manuf., 2020)

Online Activation and Deactivation of a Petri Net Supervisor. - Sadok Rezig; Nidhal Rezg; Zied Hajej (Symmetry, 2021)

Towards the Digitalization of the Healthcare Learning Process using 3D experience. - Nadia Ndhaief; Nidhal Rezg; Chadli Dziri; Esso Hanam Pitekelabou (ICM, 2022)

Multi-Periodic Pricing, Remanufacturing and Warranty Length Optimal Decisions within a Dual-Channel Supply Chain. - Ahmed Farouk Hamzaoui; Sadok Turki; Nidhal Rezg (CoDIT, 2023)

Optimal Strategy for Maintenance and Pricing Decisions for Consumables and Rent in the Case of Leased Equipment. - Ahmed Farouk Hamzaoui; Sadok Turki; Nidhal Rezg (ICNSC, 2023)

From Linear to Circular Economy : The Potential of Glass Deposits in Smart City Supply Chains. - Imen Sakji; Nadia Ndhaief; Nidhal Rezg (ICNSC, 2023)

Development of Predictive Maintenance Models for a Packaging Robot Based on Machine Learning. - Ayoub Chakroun; Yasmina Hani; Sadok Turki; Nidhal Rezg; Abderrahmane El Mhamedi (APMS (2), 2023)

Unified strategy of production, distribution and pricing in a dual-channel supply chain using leasing option. - Ahmed Farouk Hamzaoui; Sadok Turki; Nidhal Rezg (Int. J. Prod. Res., 2024)

Enhancing critical network infrastructure resilience through optimal post-disruption maintenance and routing decisions. - Ryan O'Neil; Claver Diallo; Abdelhakim Khatab; Nidhal Rezg (Reliab. Eng. Syst. Saf., 2025)