Force Ripple Compensator for a Vector Controlled PM Linear Synchronous Motor. - Markus Hirvonen; Heikki Handroos; Olli Pyrhönen (ICINCO (2), 2004)

Limitation of the load angle in a direct-torque-controlled synchronous machine drive. - Julius Luukko; Olli Pyrhönen; Markku Niemelä; Juha J. Pyrhönen (IEEE Trans. Ind. Electron., 2004)

Analysis of System Architecture of FPGA-based Embedded Controller for Magnetically Suspended Rotor. - Rafal P. Jastrzebski; Riku Pöllänen; Olli Pyrhönen (SoC, 2005)

FPGA implementation of DSVPWM modulator. - Ossi Laakkonen; Hannu Sarén; Kimmo Rauma; Olli Pyrhönen (ReConFig, 2005)

A novel FPGA implementation of a welding control using a new bus architecture. - Kimmo Rauma; Julius Luukko; Torsti Härkönen; Ilkka Pajari; Olli Pyrhönen (ReConFig, 2005)

Run-Time Debugging and Monitoring of FPGA Circuits Using Embedded Microprocessor. - Aki Penttinen; Rafal P. Jastrzebski; Riku Pöllänen; Olli Pyrhönen (DDECS, 2006)

Thermal loading of wind power converter considering dynamics of wind speed. - Elvira Baygildina; Pasi Peltoniemi; Olli Pyrhönen; Ke Ma 002; Frede Blaabjerg (IECON, 2013)

Implementation of a flux-based controller for active magnetic bearing system. - Pekko O. Jaatinen; Rafal P. Jastrzebski; Tuomo Lindh; Olli Pyrhönen (INDIN, 2013)

Online Estimation of Double-Star IPM Machine Parameters Using RLS Algorithm. - Samuli Kallio; Jussi Karttunen; Pasi Peltoniemi; Pertti Silventoinen; Olli Pyrhönen (IEEE Trans. Ind. Electron., 2014)

Decoupled Vector Control Scheme for Dual Three-Phase Permanent Magnet Synchronous Machines. - Jussi Karttunen; Samuli Kallio; Pasi Peltoniemi; Pertti Silventoinen; Olli Pyrhönen (IEEE Trans. Ind. Electron., 2014)

Online Estimation of Linear Tooth Belt Drive System Parameters. - Niko Nevaranta; Jukka Parkkinen; Tuomo Lindh; Markku Niemela; Olli Pyrhönen; Juha J. Pyrhönen (IEEE Trans. Ind. Electron., 2015)

Integrated approach to the design of wind farm infrastructure. - S. Afanasyeva; Janne Karppanen; Jussi Saari; J. Partanen; Olli Pyrhönen (ISGT Europe, 2016)

High-Speed Electrical Machine with Active Magnetic Bearing System Optimization. - Alexander Smirnov 001; Nikita Uzhegov; Teemu Sillanpää; Juha Pyrhönen; Olli Pyrhönen (IEEE Trans. Ind. Electron., 2017)

Experimental Identification and Parameter Estimation of the Mechanical Driveline of a Hybrid Bus. - Jan-Henri Montonen; Niko Nevaranta; Tuomo Lindh; Jani Alho; Paula Immonen; Olli Pyrhönen (IEEE Trans. Ind. Electron., 2018)

Monitoring Concept for a High-Speed Machine Application with a Magnetically Levitated Rotor System. - Pekko O. Jaatinen; Niko Nevaranta; Jouni Vuojolainen; Tuomo Lindh; Olli Pyrhönen (IECON, 2019)

Interactive Learning Material for Control Engineering Education Using Matlab Live Scripts. - Niko Nevaranta; Pekko O. Jaatinen; K. Gräsbeck; Olli Pyrhönen (INDIN, 2019)

Demonstrating the Impact of LTE Communication Latency for Industrial Applications. - Fedor Polunin; Dick Carrillo Melgarejo; Tuomo Lindh; Antti Pinomaa; Pedro H. J. Nardelli; Olli Pyrhönen (INDIN, 2019)

Energy Management Methodology for Fusion Grid. - Andrey Lana; Iurii Demidov; Antti Pinomaa; Dick Carrillo; Olli Pyrhönen (ISGT Europe, 2019)

Methodology of Power Distribution System Design for Hybrid Short Sea Shipping. - Andrey Lana; Antti Pinomaa; Pasi Peltoniemi; Jari Lahtinen; Tuomo Lindh; Jan-Henri Montonen; Kyösti Tikkanen; Olli Pekka Pyrhönen (IEEE Trans. Ind. Electron., 2019)

Comparison of Different Power Balance Control Methods for Battery Energy Storage Systems on Hybrid Marine Vessels. - Jan-Henri Montonen; Tuomo Lindh; Andrey Lana; Pasi Peltoniemi; Antti Pinomaa; Kyösti Tikkanen; Olli Pyrhönen (IEEE Access, 2022)