IRM as a coordinating mechanism: A study in large Japanese firms. - Osamu Sato; Masahiro Horiuchi (Inf. Manag., 1988)

On-line holographic reconstruction of NMR images by means of a liquid crystal spatial light modulator. - Satoshi Ito; Osamu Sato; Yoshifumi Yamada; Yoshitsugu Kamimura (ICIP (3), 1996)

UML Scrapbook and Realization of Snapshot Programming Environment. - Osamu Sato; Richard Potter; Mitsuharu Yamamoto; Masami Hagiya (ISSS, 2003)

Trajectory for saving energy of a direct-drive manipulator in throwing motion. - Asaji Sato; Osamu Sato; Nobuya Takahashi; Michio Kono (Artif. Life Robotics, 2007)

A study of manipulator with passive revolute joint. - Asaji Sato; Osamu Sato; Nobuya Takahashi; Michio Kono (Artif. Life Robotics, 2008)

A numerical solution of the stochastic discrete algebraic Riccati equation. - Nobuya Takahashi; Michio Kono; Tatsuo Suzuki; Osamu Sato (Artif. Life Robotics, 2009)

Robust control method for the inverted pendulum system with structured uncertainty caused by measurement error. - Nobuya Takahashi; Osamu Sato; Michio Kono (Artif. Life Robotics, 2009)

Analysis of a manipulator in consideration of the relative motion between a tray and an object. - Osamu Sato; Asaji Sato; Nobuya Takahashi; Akira Uekubo; Michio Kono (Artif. Life Robotics, 2010)

A study of guaranteed cost control of a manipulator with a passive revolute joint. - Nobuya Takahashi; Osamu Sato; Michio Kono (Artif. Life Robotics, 2010)

Analysis of a manipulator in relation to collision between a link and an object. - Asaji Sato; Osamu Sato; Nobuya Takahashi; Masahiro Yokomichi (Artif. Life Robotics, 2011)

Observer-based control of a manipulator system with structured uncertainty. - Nobuya Takahashi; Masahiro Yokomichi; Osamu Sato; Michio Kono (Artif. Life Robotics, 2011)

Laser Interferometric Measuring Method of Involute Artifact and Stabilization of Measurement. - Masaharu Komori; Fumi Takeoka; Aizoh Kubo; Hiroshige Fujio; Takehiro Ito; Sonko Osawa; Osamu Sato; Toshiyuki Takatsuji (Int. J. Autom. Technol., 2011)

Novel Artifacts Using Simple Geometries for Evaluation of a Gear Measuring Instrument. - Sonko Osawa; Osamu Sato; Yohan Kondo; Masaharu Komori; Fumi Takeoka; Toshiyuki Takatsuji (Int. J. Autom. Technol., 2011)

Efficient Multiple-Measurement Technique for Rotationally Symmetric Measurands. - Osamu Sato; Yohan Kondo; Sonko Osawa; Toshiyuki Takatsuji (Int. J. Autom. Technol., 2011)

Controllability and stabilizability of a networked control system with periodic communication constraints. - Tatsuo Suzuki; Michio Kono; Nobuya Takahashi; Osamu Sato (Syst. Control. Lett., 2011)

Analysis of manipulator in consideration of impact absorption between link and object. - Osamu Sato; Asaji Sato; Nobuya Takahashi; Masahiro Yokomichi (Artif. Life Robotics, 2012)

Experimental analysis of the two-link manipulator in consideration of the relative motion between link and object. - Asaji Sato; Osamu Sato; Nobuya Takahashi; Masahiro Yokomichi (Artif. Life Robotics, 2015)

A method for improving measurement accuracy of cylinders in dimensional CT metrology. - Lin Xue; Hiromasa Suzuki; Yutaka Ohtake; Hiroyuki Fujimoto; Makoto Abe; Osamu Sato; Toshiyuki Takatsuji (Comput. Aided Des., 2015)

Development of Dimensional X-Ray Computed Tomography. - Hiroyuki Fujimoto; Makoto Abe; Sonko Osawa; Osamu Sato; Toshiyuki Takatsuji (Int. J. Autom. Technol., 2015)

Simple Interim Check of Measuring Performance for X-Ray Computed Tomography Used as Coordinate Measuring System. - Osamu Sato; Hiroyuki Fujimoto; Sonko Osawa; Makoto Abe; Toshiyuki Takatsuji (Int. J. Autom. Technol., 2015)

Numerical Analysis of the Feldkamp-Davis-Kress Effect on Industrial X-Ray Computed Tomography for Dimensional Metrology. - Lin Xue; Hiromasa Suzuki; Yutaka Ohtake; Hiroyuki Fujimoto; Makoto Abe; Osamu Sato; Toshiyuki Takatsuji (J. Comput. Inf. Sci. Eng., 2015)

Analysis of the two-link manipulator in consideration of the horizontal motion about object. - Osamu Sato; Asaji Sato; Nobuya Takahashi; Masahiro Yokomichi (Artif. Life Robotics, 2016)

Guaranteed cost control of robot manipulator with prescribed degree of stability. - Nobuya Takahashi; Osamu Sato (Artif. Life Robotics, 2016)

A study about control for rolling objects and beam system. - Nobuya Takahashi; Osamu Sato; Asaji Sato; Yohei Yamashita (Artif. Life Robotics, 2016)

Analysis of manipulator in consideration of impact absorption between link and projected object. - Asaji Sato; Osamu Sato; Nobuya Takahashi; Masahiro Yokomichi (Artif. Life Robotics, 2017)

A study on the vibration suppression of the manipulator with flexible element. - Osamu Sato; Asaji Sato; Toshiki Yagi; Nobuya Takahashi; Masahiro Yokomichi (Artif. Life Robotics, 2017)

A Study of Mechanism of Bi-Directional Measurement Influenced by Material on Dimensional Measurement Using X-Ray CT. - Kazuya Matsuzaki; Osamu Sato; Hiroyuki Fujimoto; Makoto Abe; Toshiyuki Takatsuji (Int. J. Autom. Technol., 2017)

A study of robust controller and observer design method for a rolling object and beam system. - Nobuya Takahashi; Osamu Sato; Asaji Sato; Masahiro Yokomichi (Artif. Life Robotics, 2018)

Discrete-time robust controller and observer for a ball and beam system. - Nobuya Takahashi; Osamu Sato; Masahiro Yokomichi (Artif. Life Robotics, 2019)

Feasibility Study of Performance Assessment Gauge for Freeform Measurement. - Mari Watanabe; Kazuya Matsuzaki; Osamu Sato; Yoshiya Fukuhara; Masato Terasawa (Int. J. Autom. Technol., 2021)

Supervised Learning for Optimal Latency-Aware Microservice Placement in Edge Computing Environments. - Hirotaka Kasahara; Ryuichi Kitajima; Jun Towada; Osamu Sato (NOMS, 2025)