Topology Optimization of the Active Arms for a High-Speed Parallel Robot Based on Variable Height Method. - Qizhi Meng; Fugui Xie; Xin-Jun Liu (ICIRA (2), 2017)

V2: A novel two degree-of-freedom parallel manipulator designed for pick-and-place operations. - Qizhi Meng; Fugui Xie; Xin-Jun Liu (ROBIO, 2017)

Error modeling and sensitivity analysis of a parallel robot with R-(SS)2 branches. - Chenhui Huang; Fugui Xie; Xin-Jun Liu; Qizhi Meng (Int. J. Intell. Robotics Appl., 2020)

Design and Optimization of a Novel Intramedullary Robot for Limb Lengthening. - ShiKeat Lee; Zhenguo Nie; Handing Xu; Kai Hu; Zhao Gong; Qizhi Meng; Fugui Xie; Xin-Jun Liu (ICIRA (3), 2021)

Motion/Force Transmissibility and Constrainability of a Double-Platform Parallel Manipulator. - Qizhi Meng; Xin Yuan; Xinchen Zhuang; Fugui Xie; Xin-Jun Liu (ICIRA (3), 2021)

An Online Intelligent Kinematic Calibration Method for Quadruped Robots Based on Machine Vision and Deep Learning. - Handing Xu; Zhenguo Nie; Xinyu Cui; ShiKeat Lee; Qizhi Meng; Fugui Xie; Xin-Jun Liu (ICIRA (4), 2021)

Design and Motion/Force Transmissibility Analysis of Two Motion-Decoupled 3T1R Parallel Robots with Full Rotational Capability. - Xin Yuan; Qizhi Meng; Fugui Xie; Zhenguo Nie; Xin-Jun Liu (ICIRA (3), 2021)

Kinematic Reliability Evaluation of Planar Mechanisms with Time-Varying Correlation of Wear in Multiple Joints. - Xinchen Zhuang; Qizhi Meng; Xin-Jun Liu (ICIRA (3), 2021)

Design and development of a Schönflies-motion parallel robot with articulated platforms and closed-loop passive limbs. - Qizhi Meng; Xin-Jun Liu; Fugui Xie (Robotics Comput. Integr. Manuf., 2022)

Support Boot Mechanisms of Shaft Boring Machine for Underground Vertical Tunnel Construction. - Qizhi Meng; Lianhui Jia; Lijie Jiang; Yongliang Wen; Ruijie Tang; Xin Yuan; Xin-Jun Liu (ICIRA (6), 2023)

Identification data of distal and proximal wrenches for motion-force interaction performance evaluation of parallel mechanisms. - Qizhi Meng; Fugui Xie; Xin-Jun Liu (RCAR, 2023)

Detecting the Intention of Sit-to-Stand by Analyzing Reaction Forces on the Foot with Pareto Optimum. - Ming Jiang; Jian Zheng; Qizhi Meng; Yusuke Sugahara; Yukio Takeda (EMBC, 2024)

Preliminary Investigation of Spring-Based Gravity Compensation for an Upper Limb Assistive Robot. - Ming Jiang; Yang Wang; Qizhi Meng; Chin-Hsing Kuo; Marco Ceccarelli; Yusuke Sugahara; Yukio Takeda (ICM, 2025)

Design of A Novel Statically Balanced Mechanism for End-effector-type Upper Limb Assistance. - Qizhi Meng; Ming Jiang; Ruijie Tang; Chin-Hsing Kuo; Marco Ceccarelli; Yukio Takeda (ICM, 2025)