Efficient Algorithms for Scheduling Semiconductor Burn-In Operations. - Chung-Yee Lee; Reha Uzsoy; Louis A. Martin-Vega (Oper. Res., 1992)

A new dynamic programming algorithm for the parallel machines total weighted completion time problem. - Chung-Yee Lee; Reha Uzsoy (Oper. Res. Lett., 1992)

Minimizing total completion time on a batch processing machine with job families. - Vijaya Chandru; Chung-Yee Lee; Reha Uzsoy (Oper. Res. Lett., 1993)

Worst-case error bounds for parallel machine scheduling problems with bounded sequence-dependent setup times. - Irfan M. Ovacik; Reha Uzsoy (Oper. Res. Lett., 1993)

An iterative heuristic for the single machine dynamic total completion time scheduling problem. - Suresh Chand; Rodney Traub; Reha Uzsoy (Comput. Oper. Res., 1996)

Rolling horizon procedures for the single machine deterministic total completion time scheduling problem with release dates. - Suresh Chand; Rodney Traub; Reha Uzsoy (Ann. Oper. Res., 1997)

Rescheduling on a single machine with part-type dependent setup times and deadlines. - Ali Tamer Ünal; Reha Uzsoy; Ali S. Kiran (Ann. Oper. Res., 1997)

A Computational Study of Shifting Bottleneck Procedures for Shop Scheduling Problems. - Ebru Demirkol; Sanjay Mehta; Reha Uzsoy (J. Heuristics, 1997)

Letter to the Editor - Addendum to "Efficient Algorithms for Scheduling Semiconductor Burn-In Operations. - Chung-Yee Lee; Reha Uzsoy; Louis A. Martin-Vega (Oper. Res., 1997)

Benchmarks for shop scheduling problems. - Ebru Demirkol; Sanjay Mehta; Reha Uzsoy (Eur. J. Oper. Res., 1998)

A capacity allocation problem with integer side constraints. - L. Beril Toktay; Reha Uzsoy (Eur. J. Oper. Res., 1998)

Predictable scheduling of a job shop subject to breakdowns. - Sanjay Mehta; Reha Uzsoy (IEEE Trans. Robotics Autom., 1998)

Media Streams Scheduling for Synchronization in Distributed Multimedia Systems. - Miae Woo; Reha Uzsoy; Arif Ghafoor (J. Parallel Distributed Comput., 1999)

Alternative loading and dispatching policies for furnace operations in semiconductor manufacturing: a comparison by simulation. - Elif Akçali; Reha Uzsoy; David G. Hiscock; Anne L. Moser; Timothy J. Teyner (WSC, 2000)

Integrating Interval Estimates of Global Optima and Local Search Methods for Combinatorial Optimization Problems. - Irfan M. Ovacik; Srikanth Rajagopalan; Reha Uzsoy (J. Heuristics, 2000)

Experimental Evaluation of Heuristic Optimization Algorithms: A Tutorial. - Ronald L. Rardin; Reha Uzsoy (J. Heuristics, 2001)

A genetic algorithm to minimize maximum lateness on a batch processing machine. - Cheng-Shuo Wang; Reha Uzsoy (Comput. Oper. Res., 2002)

Executing production schedules in the face of uncertainties: A review and some future directions. - Haldun Aytug; Mark A. Lawley; Kenneth McKay; Shantha Mohan; Reha Uzsoy (Eur. J. Oper. Res., 2005)

Outbound supply chain network design with mode selection, lead times and capacitated vehicle distribution centers. - Erdem Eskigun; Reha Uzsoy; Paul V. Preckel; George Beaujon; Subramanian Krishnan; Jeffrey D. Tew (Eur. J. Oper. Res., 2005)

Using system dynamics simulations to compare capacity models for production planning. - Seza Orçun; Reha Uzsoy; Karl G. Kempf (WSC, 2006)

Rapid Modeling and Discovery of Priority Dispatching Rules: An Autonomous Learning Approach. - Christopher D. Geiger; Reha Uzsoy; Haldun Aytug (J. Sched., 2006)

Determining safety stocks in the presence of workload-dependent lead times. - Seza Orçun; Sila Çetinkaya; Reha Uzsoy (WSC, 2007)

A genetic algorithm for minimizing maximum lateness on parallel identical batch processing machines with dynamic job arrivals and incompatible job families. - Sujay Malve; Reha Uzsoy (Comput. Oper. Res., 2007)

Lagrangian heuristics for scheduling new product development projects in the pharmaceutical industry. - Vishal A. Varma; Reha Uzsoy; Joseph F. Pekny; Gary E. Blau (J. Heuristics, 2007)

Hybrid decomposition heuristics for solving large-scale scheduling problems in semiconductor wafer fabrication. - Karthik Sourirajan; Reha Uzsoy (J. Sched., 2007)

Modeling and analysis of semiconductor manufacturing in a shrinking world: Challenges and successes. - Chen-Fu Chien 001; Stéphane Dauzère-Pérès; Hans Ehm; John W. Fowler; Zhibin Jiang; Shekar Krishnaswamy; Lars Mönch; Reha Uzsoy (WSC, 2008)

An experimental study of an iterative simulation-optimization algorithm for production planning. - Durmus Fatih Irdem; Necip Baris Kacar; Reha Uzsoy (WSC, 2008)

Incorporating manufacturing lead times in joint production-marketing models: A review and some future directions. - Abhijit Upasani; Reha Uzsoy (Ann. Oper. Res., 2008)

Heuristics for minimizing maximum lateness on a single machine with family-dependent set-up times. - Reha Uzsoy; Juan Diego Velásquez (Comput. Oper. Res., 2008)

An integrated production planning model with load-dependent lead-times and safety stocks. - Seza Orçun; Reha Uzsoy; Karl G. Kempf (Comput. Chem. Eng., 2009)

Heuristics for capacity planning problems with congestion. - Sukgon Kim; Reha Uzsoy (Comput. Oper. Res., 2009)

A genetic algorithm for a single product network design model with lead time and safety stock considerations. - Karthik Sourirajan; Leyla Ozsen; Reha Uzsoy (Eur. J. Oper. Res., 2009)

Estimating clearing functions from simulation data. - Necip Baris Kacar; Reha Uzsoy (WSC, 2010)

Modelling the response of a public health department to infectious disease. - Travis Worth; Reha Uzsoy; Erika Samoff; Anne-Marie Meyer; Jean-Marie Maillard; Aaron M. Wendelboe (WSC, 2010)

Production planning for semiconductor manufacturing via simulation optimization. - Jingang Liu; Chihui Li; Feng Yang 016; Hong Wan; Reha Uzsoy (WSC, 2011)

A comparison of production planning formulations with exogenous cycle time estimates using a large-scale wafer fab model. - Necip Baris Kacar; Lars Mönch; Reha Uzsoy (WSC, 2013)

Integrated Production Planning and Pricing Decisions in Congestion-Prone Capacitated Production Systems. - Abhijit Upasani; Reha Uzsoy (Essays in Production, Project Planning and Scheduling, 2014)

(Almost) present at the creation: 25 years of modelling and simulation in semiconductor manufacturing. - Reha Uzsoy (WSC, 2014)

Statistical optimum estimation techniques for combinatorial optimization problems: a review and critique. - Angela P. Giddings; Ronald L. Rardin; Reha Uzsoy (J. Heuristics, 2014)

Lead time modeling in production planning. - Erinç Albey; Reha Uzsoy (WSC, 2015)

Simulation-based performance assessment of production planning formulations for semiconductor wafer fabrication. - Timm Ziarnetzky; Necip Baris Kacar; Lars Mönch; Reha Uzsoy (WSC, 2015)

Estimating Clearing Functions for Production Resources Using Simulation Optimization. - Necip Baris Kacar; Reha Uzsoy (IEEE Trans Autom. Sci. Eng., 2015)

A chance constraint based multi-item production planning model using simulation optimization. - Erinç Albey; Reha Uzsoy; Karl G. Kempf (WSC, 2016)

Modeling the impact of new product introduction on the output of semiconductor wafer fabrication facilities. - Atchyuta Bharadwaj Manda; Reha Uzsoy; Karl G. Kempf; Sukgon Kim (WSC, 2016)

Guest Editorial Special Section on Emerging Advances in Logistics Systems: Integrating Remote Sensing, IT, and Autonomy. - Maria Pia Fanti; Walter Ukovich; Reha Uzsoy (IEEE Trans Autom. Sci. Eng., 2016)

Load dependent lead time modelling: A robust optimization approach. - Erinç Albey; Ihsan Yanikoglu; Reha Uzsoy (WSC, 2017)

An iterative refinement approach to fitting clearing functions to data from simulation models of production systems. - Karthick Gopalswamy; Reha Uzsoy (WSC, 2017)

Multi-dimensional clearing functions for aggregate capacity modelling in multi-stage production systems. - Erinç Albey; Ümit Bilge; Reha Uzsoy (Int. J. Prod. Res., 2017)

Problem Reduction Approaches for Production Planning Using Clearing Functions. - Necip Baris Kacar; Lars Mönch; Reha Uzsoy (CASE, 2018)

An Exploratory Comparison of Clearing function and Data-Driven production Planning Models. - Karthick Gopalswamy; Reha Uzsoy (WSC, 2018)

Simulation Optimization for Planning Product Transitions in semiconductor manufacturing Facilities. - Atchyuta Bharadwaj Manda; Reha Uzsoy (WSC, 2018)

Rounding heuristics for multiple product dynamic lot-sizing in the presence of queueing behavior. - Yongha Kang; Erinç Albey; Reha Uzsoy (Comput. Oper. Res., 2018)

Robust optimization approaches for the equitable and effective distribution of donated food. - Irem Sengul Orgut; Julie S. Ivy; Reha Uzsoy; Charlie Hale (Eur. J. Oper. Res., 2018)

A comparison of mixed integer programming formulations of the capacitated lot-sizing problem. - Hakan F. Karagul; Donald P. Warsing Jr.; Thom J. Hodgson; Maaz Saleem Kapadia; Reha Uzsoy (Int. J. Prod. Res., 2018)

A survey of semiconductor supply chain models part I: semiconductor supply chains, strategic network design, and supply chain simulation. - Lars Mönch; Reha Uzsoy; John W. Fowler (Int. J. Prod. Res., 2018)

A survey of semiconductor supply chain models part III: master planning, production planning, and demand fulfilment. - Lars Mönch; Reha Uzsoy; John W. Fowler (Int. J. Prod. Res., 2018)

A survey of semiconductor supply chain models Part II: demand planning, inventory management, and capacity planning. - Reha Uzsoy; John W. Fowler; Lars Mönch (Int. J. Prod. Res., 2018)

Rolling horizon, multi-product production planning with chance constraints and forecast evolution for wafer fabs. - Timm Ziarnetzky; Lars Mönch; Reha Uzsoy (Int. J. Prod. Res., 2018)

A Robust Optimization Approach for Production Planning Under Exogenous Planned Lead Times. - Erinç Albey; Ihsan Yanikoglu; Reha Uzsoy (WSC, 2019)

Evaluating Mixed Integer Programming Models for Solving Stochastic Inventory Problems. - Bas Bluemink; A. G. de Kok; Srinivasan Balan; Reha Uzsoy (WSC, 2019)

Optimzing Engineering and Production Lots During Product Transitions in Semiconductor Manufacturing. - Atchyuta Bharadwaj Manda; Reha Uzsoy (WSC, 2019)

Problemreduzierungsansätze für die Produktionsplanung unter Verwendung von Auslastungsfunktionen. - Necip Baris Kacar; Lars Mönch; Reha Uzsoy (Autom., 2019)

A data-driven iterative refinement approach for estimating clearing functions from simulation models of production systems. - Karthick Gopalswamy; Reha Uzsoy (Int. J. Prod. Res., 2019)

Valid inequalities for concave piecewise linear regression. - Karthick Gopalswamy; Yahya Fathi; Reha Uzsoy (Oper. Res. Lett., 2019)

A Simulation Optimization Approach for Managing Product Transitions in Multistage Production Lines. - Atchyuta Bharadwaj Manda; Karthick Gopalswamy; Sara Shashaani; Reha Uzsoy (WSC, 2020)

Iterative combinatorial auctions for managing product transitions in semiconductor manufacturing. - Ankit Bansal; Reha Uzsoy; Karl G. Kempf (IISE Trans., 2020)

An Optimization Framework for Managing Product Transitions in Semiconductor Manufacturing. - Carlos Leca; Karl G. Kempf; Reha Uzsoy (WSC, 2021)

Conic programming models for production planning with clearing functions: Formulations and duality. - Karthick Gopalswamy; Reha Uzsoy (Eur. J. Oper. Res., 2021)

Towards Decentralized Decisions for Managing Product Transitions in Semiconductor Manufacturing. - Carlos Leca; Edward P. Fitts; Karl G. Kempf; Reha Uzsoy (WSC, 2022)

Impact of Production Planning Approaches on Wafer Fab Performance During Product Mix Changes. - Tobias Völker; Lars Mönch; Reha Uzsoy (WSC, 2022)

Integrated and hierarchical systems for coordinating order acceptance and release planning. - Foad Ghadimi; Tarik Aouam; Stefan Haeussler; Reha Uzsoy (Eur. J. Oper. Res., 2022)

A genetic algorithm for order acceptance and scheduling in additive manufacturing. - Maaz Saleem Kapadia; Reha Uzsoy; Binil Starly; Donald P. Warsing Jr. (Int. J. Prod. Res., 2022)

Order release in production planning and control systems: challenges and opportunities. - Hubert Missbauer; Reha Uzsoy (Int. J. Prod. Res., 2022)

Managing Product Transitions: A Bilevel Programming Approach. - Rahman Khorramfar; Osman Y. Özaltin; Karl G. Kempf; Reha Uzsoy (INFORMS J. Comput., 2022)

Decentralized Decision-Making Framework for Managing Product Rollovers in the Semiconductor Manufacturing. - Carlos Leca; Reha Uzsoy; Karl G. Kempf (WSC, 2023)

All You Need is an Improving Column: Enhancing Column Generation for Parallel Machine Scheduling via Transformers. - Amira Hijazi; Osman Y. Özaltin; Reha Uzsoy (CoRR, 2024)

Clearing function-based release date optimization in a multi-item multi-stage MRP planned production system in a rolling-horizon planning environment with multilevel BOM. - Wolfgang Seiringer; Klaus Altendorfer; Reha Uzsoy (CoRR, 2025)